Export limit exceeded: 50092 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (50092 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90455 | 2026-09-13 | N/A | ||
| A prior update that raised a bundled HTTP client library to a version remediating known vulnerabilities was later reverted, reintroducing the earlier, vulnerable version into a log-processing component. The only code path in that component using the library issues a request to a single fixed, trusted vendor URL at initialization and does not process attacker-controlled input through the library, limiting practical exploitability of the reintroduced version in this context. | ||||
| CVE-2026-90456 | 2026-09-13 | N/A | ||
| An example environment-configuration file for a bundled inventory-management component ships with a fixed, publicly-known administrative password. A deployment that copies this example file into active configuration without running the setup routine that regenerates credentials will expose that component's administrative interface to anyone aware of the default value. | ||||
| CVE-2026-80088 | 1 Microsoft | 17 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 14 more | 2026-09-13 | 6.5 Medium |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-90451 | 2026-09-13 | N/A | ||
| An example environment-configuration file ships with a fixed, publicly-known secret value used to sign authentication cookies for a bundled packet-analysis component. A deployment that copies this example file into active configuration without running the setup routine that regenerates the value will use the known default, allowing an attacker aware of the default to forge valid authentication cookies for that component. | ||||
| CVE-2026-89767 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix double end_creating() on the casefold-mismatch path ovl_create_real() releases the new dentry twice when the casefold consistency check fails. The S_IFDIR branch calls end_creating() and sets err, then falls through to the common out: label which calls end_creating() on the same dentry again: case S_IFDIR: newdentry = ovl_do_mkdir(ofs, dir, newdentry, attr->mode); err = PTR_ERR_OR_ZERO(newdentry); if (!err && ofs->casefold != ovl_dentry_casefolded(newdentry)) { pr_warn_ratelimited(...); end_creating(newdentry); /* first */ err = -EINVAL; } break; ... if (err) goto out; ... out: if (err) { end_creating(newdentry); /* second, same dentry */ return ERR_PTR(err); } end_creating() is end_dirop(), which does inode_unlock() on the parent and dput() on the dentry, so the parent directory's i_rwsem is unlocked twice and the dentry is put twice. The second unlock releases a lock that is not held, which is what wedges every later creation under that parent, and the second dput() drops a reference that was never taken. The branch was added by commit dfc7da402ccc ("ovl: Check for casefold consistency when creating new dentries") as a bare dput(), which already released the reference twice; commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on failure.") converted both sites to end_creating(), adding the double unlock. This is reachable by an unprivileged user. The casefold consistency of the layers is validated at mount time in ovl_parse_layer(), and again on every lookup in ovl_lookup_single(), but ofs->workdir is the internal "work" subdirectory created inside the user-supplied workdir, and that subdirectory is not re-checked. Marking it casefolded after the mount therefore makes every ovl_create_temp() inherit the wrong state - and that path reaches ovl_create_real() through ovl_start_creating_temp(), which uses start_creating() with a generated name and so never runs the lookup-time check. unshare -Urm mount -t tmpfs -o casefold=utf8-12.1.0 tmpfs mnt mkdir -p mnt/lower/d mnt/upper mnt/work mnt/merged mount -t overlay ovl -o lowerdir=mnt/lower,\ upperdir=mnt/upper,workdir=mnt/work mnt/merged chattr +F mnt/work/work mkdir mnt/merged/d/sub # directory copy-up overlayfs: wrong inherited casefold (work/#5) and the next copy-up blocks forever on the parent's i_rwsem: mkdir D start_creating+0x65/0xb0 ovl_start_creating_temp+0xb0/0xe0 [overlay] ovl_create_temp+0xa3/0x1d0 [overlay] ovl_copy_up_one+0x1f1c/0x21c0 [overlay] ovl_copy_up_flags+0xf5/0x140 [overlay] ovl_create_object+0xb7/0x220 [overlay] ovl_mkdir+0x23/0x40 [overlay] Drop the end_creating() from the branch and let out: own the cleanup, which is what every other error path in this function already does. | ||||
| CVE-2026-89743 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: nsm: bound the device-reported response length nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported by the NSM device into msg->resp.len without bounding it to the response buffer. A malicious or buggy backend can report a length larger than the response buffer; parse_resp_raw() then copies that many bytes out of the fixed buffer to user space, disclosing adjacent kernel heap (an out-of-bounds read). The request path already floors its length in fill_req_raw(); the response path lacks the symmetric check. Clamp the stored length to the size of the response buffer. Well-behaved devices report no more than the posted buffer size, so conforming traffic is unaffected. | ||||
| CVE-2026-89741 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-dev: fix error handling in __video_register_device()" This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a. The intentions of that patch were good, but it doesn't work. The idea is that if device_register fails, you have to do a put_device to let the ref counter release resources. However, the V4L2 API says that if video_register_device() fails, then you have to call video_device_release(), which kfree()s the video_device struct. But the put_device() will already have freed the struct, so you end up in a double-free scenario. There is not really a good way of fixing this without breaking video_register_device() into two parts, one that initializes everything, and one that does the actual device_register, and then converting all V4L2 drivers to this new model. That is a massive job, and it is very unlikely that device_register will fail. So rather than ending up in a double-free scenario, just revert this patch, and in that case we'll have a small memory leak. Which is a lot more robust. | ||||
| CVE-2026-89731 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from the RCRB MMIO block using a readl() loop bounded by sizeof(struct aer_capability_regs). This struct is a software layout and its embedded struct pcie_tlp_log is larger than the on-wire AER capability. As a result the loop reads past the mapped AER register block. The over-read also populates the software-only tail fields including header_log.header_len. An out-of-range header_len passed to pcie_print_tlp_log() can then loop past the header log buffer and cause a second out-of-bounds read. The read was correct when introduced, but struct pcie_tlp_log has since grown (Header Log and TLP Prefix Log sizes, header_len and flit fields), so sizeof(struct aer_capability_regs) no longer matches the physical AER capability. Bound the read to the physical AER registers, header through the 16 byte Header Log. Zero the destination first so the software-only fields are deterministic. | ||||
| CVE-2026-89720 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: fix out-of-bounds read in signature length check ubifs_sb_verify_signature() bounds the on-disk ubifs_sig_node->len field before handing the signature payload to verify_pkcs7_signature(), but the check has the wrong sign: if (le32_to_cpu(signode->len) > snod->len + sizeof(struct ubifs_sig_node)) The signature bytes start sizeof(struct ubifs_sig_node) (UBIFS_SIG_NODE_SZ, 64 bytes) into the node, so the payload is at most snod->len - sizeof(struct ubifs_sig_node) bytes long. Adding the header size instead of subtracting it accepts a declared length up to 2 * UBIFS_SIG_NODE_SZ larger than the node actually holds -- past the end of c->sbuf, which is vmalloc(c->leb_size). verify_pkcs7_signature() -> pkcs7_parse_message() -> asn1_ber_decoder() is then handed that inflated length and reads beyond the allocation while walking the DER headers. The node length comes straight from the mounted image, so a crafted signed UBIFS image reaches this via ubifs_read_superblock() before the signature is cryptographically checked. snod->len is guaranteed to be >= UBIFS_SIG_NODE_SZ by the node scanner (c->ranges[UBIFS_SIG_NODE].min_len == UBIFS_SIG_NODE_SZ), so the corrected subtraction cannot underflow. Legitimately signed images are unaffected: a correct superblock never declares a signature longer than the node it is embedded in. | ||||
| CVE-2026-89705 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths nfsd_dispatch() sets rq_status_counter to an odd value once a request has been decoded, and back to an even value once it has been fully processed, forming a seq-lock like protocol with the lockless reader in nfsd_nl_rpc_status_get_dumpit(). Only the fully successful path restored the counter to even. The cache-hit (RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return after the odd-valued store without ever bringing the counter back to even. Once one of those paths is taken, rq_status_counter is left odd: the next request's decode ORs in 1 (still odd) and only a subsequent successful encode restores even. While stuck odd, the dumpit reader treats the rqstp fields as stable and its retry check compares against the same unchanging odd value, so it never detects concurrent mutation. This exposes actively mutating fields (e.g. args->ops / args->opcnt during compound decode and release) to the lockless reader, which can read past the end of the 8-element inline ops array. Add a helper that advances the counter to the next even value and call it on every return path that follows the odd-valued store. The decode-error path is left untouched as it is reached before the counter is set odd. | ||||
| CVE-2026-89691 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: clear opcnt on compound arg release to prevent OOB read nfsd4_release_compoundargs() resets args->ops to the inline iops[8] array when the dynamically-allocated ops buffer is freed, but leaves args->opcnt at its original value (which can be up to 200 for NFSv4.1+ compounds). If rq_status_counter is stuck at an odd value (which can happen when nfsd_dispatch() hits an error path after setting it odd), the RPC status dumpit handler reads min(opcnt, 16) entries from args->ops[]. Since iops only has 8 elements and is the last field in struct nfsd4_compoundargs, reading indices 8-15 accesses adjacent slab memory and leaks it to userspace via netlink. Zero opcnt unconditionally in nfsd4_release_compoundargs() so stale compound metadata is never exposed through the status interface. [ cel: Remove the kvfree_rcu_mightsleep() sleep from the exposure window ] | ||||
| CVE-2026-89685 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix clock domain mismatch in clients_still_reclaiming() clients_still_reclaiming() computes a deadline from nn->boot_time (CLOCK_REALTIME, ~1.7 billion) but compares it against ktime_get_boottime_seconds() (CLOCK_BOOTTIME, seconds since boot). The comparison is always false — it would take ~54 years of uptime for BOOTTIME to exceed the REALTIME-derived deadline. This means any client can hold the server in grace indefinitely by sending CLAIM_PREVIOUS OPEN requests, blocking all non-reclaim operations for all other clients. Add boot_time_bt (CLOCK_BOOTTIME) alongside the existing boot_time and use it for the deadline computation. boot_time (CLOCK_REALTIME) is preserved for its cl_boot clientid-nonce role. | ||||
| CVE-2026-89671 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: gate nfs3 setacl by argp->mask nfsd3_proc_setacl() calls set_posix_acl() unconditionally for both ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT, passing argp->acl_access and argp->acl_default verbatim. The NFSv3 ACL decoder only populates those pointers when the corresponding mask bit is set: nfs3svc_decode_setaclargs() if (args->mask & NFS_ACL) decode into acl_access if (args->mask & NFS_DFACL) decode into acl_default /* otherwise the pointer stays NULL (pc_argzero) */ nfsd3_proc_setacl() set_posix_acl(.., ACL_TYPE_ACCESS, argp->acl_access) set_posix_acl(.., ACL_TYPE_DEFAULT, argp->acl_default) set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this ACL type" operation. A NULL pointer that means "the client did not send this arm" is therefore indistinguishable from "the client asked to remove this ACL". A SETACL with mask=NFS_ACL silently drops the directory's default ACL; mask=0 drops both. The sibling nfsd3_proc_getacl() already consults argp->mask before touching each arm; mirror that in setacl. Fix by wrapping each set_posix_acl() call in the matching mask bit check and initializing error to 0 before inode_lock so that a request with neither bit set leaves the on-disk ACLs untouched and returns nfs_ok. The out_drop_lock path and the unconditional posix_acl_release() at out: are preserved; both NULL-tolerate the skipped arms. | ||||
| CVE-2026-89665 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range useconds in NFSv2 SETATTR/CREATE The NFSv2 sattr decoder converts the wire useconds to nanoseconds in svcxdr_decode_sattr(): iap->ia_atime.tv_nsec = tmp2 * NSEC_PER_USEC; tmp2 is a u32 and NSEC_PER_USEC is 1000, so the product is computed in unsigned long. On ILP32 that is 32 bits, and an out-of-range useconds value such as 4294968 wraps to tv_nsec == 704. The corruption therefore happens during decode, before any proc function can inspect the value, and a later range check on tv_nsec would see an in-range result and accept it. Rejecting in the decoder yields an RPC GARBAGE_ARGS reply. NFSv2 defines no NFSERR_INVAL, so there is no NFS-level status to return for a malformed time argument, and the check cannot move to the proc function the way the v3/v4 nsec range checks do. Guard the raw useconds before the multiplication and reject values greater than 1000000. useconds == 1000000 is kept: it is the Sun convention for "set to the current server time", and the in-tree Linux NFSv2 client emits it in both the atime and the mtime field for a plain touch / utimes(file, NULL) (see encode_sattr() and xdr_encode_current_server_time() in fs/nfs/nfs2xdr.c). Rejecting 1000000 would turn that common operation into a hard decode failure for both SETATTR and CREATE. 1000000 * NSEC_PER_USEC is 10^9, which does not wrap on ILP32, so the Sun convention value passes through safely. Only genuinely out-of-range values (> 1000000) are rejected. The atime and mtime guards are therefore symmetric. The decoder only applied the Sun convention in the mtime block, which clears ATTR_ATIME_SET|ATTR_MTIME_SET when mtime useconds == 1000000. If a client puts 1000000 in the atime field but not in the mtime field, the atime block stored an out-of-range tv_nsec (10^9) and left ATTR_ATIME_SET set, so the bogus value reached the filesystem. Apply the convention in the atime block as well, clearing ATTR_ATIME_SET so the server uses its current time and ignores the value. Only ATTR_ATIME_SET is cleared there. The mtime block keeps its existing behavior, where 1000000 means "set both atime and mtime to now". [ cel: various tweaks, addenda, and clean-ups ] | ||||
| CVE-2026-89657 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: validate OSD extent maps before cursor advance net/ceph/osd_client.c:osd_sparse_read() validates that the sparse-read data length matches the summed extent lengths, but it does not validate that each OSD-supplied extent is monotonic and lies inside the original request range. A malformed authenticated OSD reply can advertise a far-forward nonzero extent offset with a matching data length and make the client advance the message-data cursor beyond the request buffer. This reaches the BUG_ON(!*length) assertion in ceph_msg_data_next() from the client receive path. Impact: A malicious or compromised authenticated Ceph OSD peer can crash a kernel Ceph client via a malformed sparse-read reply. Reject sparse extent maps that overflow, move backwards, overlap, or extend outside the original sparse-read request before advancing the cursor. [ idryomov: perform sparse_extent_map_valid() check a bit earlier, in CEPH_SPARSE_READ_DATA_LEN instead of CEPH_SPARSE_READ_DATA_PRE state ] | ||||
| CVE-2026-89652 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound copied dentry name length in NFS export get_name ceph_get_name() copies the MDS-supplied name into the caller's NAME_MAX-sized buffer with memcpy(name, rinfo->dname, rinfo->dname_len) and then writes name[rinfo->dname_len] = 0, without checking dname_len against NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME reply with dname_len > NAME_MAX overflows the buffer. __get_snap_name() copies rde->name / rde->name_len the same unchecked way. Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX name buffer in a client's NFS-export get_name path, a slab out-of-bounds write reported by KASAN. Reachable when a CephFS mount is re-exported over NFS. Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with -ENAMETOOLONG before the copy, and use it in both ceph_get_name() and __get_snap_name(). | ||||
| CVE-2026-89651 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound MDSCapAuth path and fs_name decode in handle_session() handle_session() decodes the MDSCapAuth records carried by a CEPH_SESSION_OPEN message (msg_version >= 6). For each record the match.path and match.fs_name byte strings are read by first decoding a 32-bit length and then copying that many bytes with the bare ceph_decode_copy(). Unlike the surrounding fields, which all use the _safe decode variants, these two copies are not preceded by a ceph_decode_need() bounds check, and the enclosing MDSCapAuth and MDSCapMatch struct_len fields are skipped rather than enforced as an upper bound. A length larger than the bytes remaining in the message front makes ceph_decode_copy() read past the end of the front buffer. The message front is a dedicated allocation (ceph_msg_new2() -> kvmalloc), so the over-read runs off that object. A malicious or compromised MDS can trigger this with the first post-connect message on mount, with no client-side user interaction; under KASAN it is reported as a slab-out-of-bounds read in handle_session(). Impact: a malicious MDS can force the kernel client to read up to 4 GiB past the message front allocation during session setup, crashing the client (out-of-bounds read). Switch both copies to ceph_decode_copy_safe(), which performs the ceph_decode_need() bounds check before the copy and branches to the existing bad label, matching the rest of the decoder and the error path that frees the partially decoded cap_auths array. | ||||
| CVE-2026-89650 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound num_export_targets array for mds info v2/v3 ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from each per-mds info record and advances the decode cursor by num_export_targets * sizeof(u32) without first checking that many bytes remain. The only upper-bound check that catches a runaway cursor (*p > info_end) is gated on info_v >= 4, because info_end is left NULL for info_v 2 and 3. When the monitor sends an MDS map whose per-mds info version is 2 or 3 with an oversized num_export_targets, the cursor moves past the message front buffer and the later export-targets loop calls the unchecked ceph_decode_32() on out-of-bounds memory. A kernel client processes CEPH_MSG_MDS_MAP from its monitor session (net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an on-path attacker on an unsigned/unencrypted messenger session, can therefore drive an out-of-bounds read in the client kernel; on x86_64 with KASAN it is reported as a slab-out-of-bounds read in ceph_mdsmap_decode(). The decoded values land in the internal info->export_targets[] array, so the consequence is a kernel out-of-bounds read, not an information leak to the attacker. Impact: a malicious or compromised Ceph monitor sending an MDS map with a per-mds info version of 2 or 3 and an oversized num_export_targets field triggers an out-of-bounds read in the CephFS client kernel. Add a ceph_decode_need() for the export-targets array before advancing the cursor, so the bound is enforced for every info_v >= 2, not only info_v >= 4. This mirrors the count-then-need idiom already used for m_data_pg_pools later in the same function. Compute the export-targets byte count with size_mul() and reuse that checked length when advancing the cursor, so the attacker-controlled num_export_targets multiplication fails closed on overflow rather than relying on the later kcalloc() guard. | ||||
| CVE-2026-89649 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: bound xattr value length in __build_xattrs() __build_xattrs() decodes the MDS-supplied xattr blob one attribute at a time. For each attribute it reads a 32-bit name length, advances past the name bytes, reads a 32-bit value length, records the value pointer, and advances past the value bytes. The two length fields are read with ceph_decode_32_safe(), but the value bytes themselves are advanced over with a bare "p += len" and no ceph_decode_need() check that "len" bytes remain in the blob. For every attribute except the last, the next iteration's ceph_decode_32_safe() on the following name length implicitly verifies that the previous value did not run past the blob end. The final attribute has no successor, so its decoded value length is never checked against the blob bounds. A malicious or compromised metadata server can set the last attribute's value length larger than the bytes actually present in the blob. The blob is a dedicated kvmalloc() allocation sized to the wire length (ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the oversized length in xattr->val_len verbatim, and a later getxattr(2) runs memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer, copying bytes past the end of the allocation back to user space. Impact: a malicious metadata server discloses adjacent kernel heap bytes to a local user via getxattr(2) on a CephFS file. Add the missing ceph_decode_need() so an out-of-bounds value length on the final attribute fails the decode and returns -EIO instead of being stored. | ||||
| CVE-2026-89634 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix ALIGN() overflow in symlink_data() error context loop The check added by commit 7d9a7f1f96cd ("smb/client: fix possible infinite loop and oob read in symlink_data()") compared the post-ALIGN length against the remaining buffer, but ALIGN() itself can overflow: for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8) wraps to 0, so the subsequent bounds check passes, and the loop advances by zero bytes leaving 'p' pointing into stale data. Fix by checking the raw ErrorDataLength against the remaining space before applying ALIGN(), then checking again after. Since raw_len is bounded by the buffer, raw_len + 7 cannot overflow, so the second check is an exact post-alignment bounds guard. | ||||