Export limit exceeded: 359353 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (359353 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54071 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: use work to update rate to avoid RCU warning The ieee80211_ops::sta_rc_update must be atomic, because ieee80211_chan_bw_change() holds rcu_read lock while calling drv_sta_rc_update(), so create a work to do original things. Voluntary context switch within RCU read-side critical section! WARNING: CPU: 0 PID: 4621 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x571/0x5d0 CPU: 0 PID: 4621 Comm: kworker/u16:2 Tainted: G W OE Workqueue: phy3 ieee80211_chswitch_work [mac80211] RIP: 0010:rcu_note_context_switch+0x571/0x5d0 Call Trace: <TASK> __schedule+0xb0/0x1460 ? __mod_timer+0x116/0x360 schedule+0x5a/0xc0 schedule_timeout+0x87/0x150 ? trace_raw_output_tick_stop+0x60/0x60 wait_for_completion_timeout+0x7b/0x140 usb_start_wait_urb+0x82/0x160 [usbcore usb_control_msg+0xe3/0x140 [usbcore rtw_usb_read+0x88/0xe0 [rtw_usb rtw_usb_read8+0xf/0x10 [rtw_usb rtw_fw_send_h2c_command+0xa0/0x170 [rtw_core rtw_fw_send_ra_info+0xc9/0xf0 [rtw_core drv_sta_rc_update+0x7c/0x160 [mac80211 ieee80211_chan_bw_change+0xfb/0x110 [mac80211 ieee80211_change_chanctx+0x38/0x130 [mac80211 ieee80211_vif_use_reserved_switch+0x34e/0x900 [mac80211 ieee80211_link_use_reserved_context+0x88/0xe0 [mac80211 ieee80211_chswitch_work+0x95/0x170 [mac80211 process_one_work+0x201/0x410 worker_thread+0x4a/0x3b0 ? process_one_work+0x410/0x410 kthread+0xe1/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> | ||||
| CVE-2023-54073 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site The following crash was reported: [ 1950.279393] list_del corruption, ffff99560d485790->next is NULL [ 1950.279400] ------------[ cut here ]------------ [ 1950.279401] kernel BUG at lib/list_debug.c:49! [ 1950.279405] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 1950.279407] CPU: 11 PID: 5886 Comm: modprobe Tainted: G O 6.2.8_1 #1 [ 1950.279409] Hardware name: Gigabyte Technology Co., Ltd. B550M AORUS PRO-P/B550M AORUS PRO-P, BIOS F15c 05/11/2022 [ 1950.279410] RIP: 0010:__list_del_entry_valid+0x59/0xc0 [ 1950.279415] Code: 48 8b 01 48 39 f8 75 5a 48 8b 72 08 48 39 c6 75 65 b8 01 00 00 00 c3 cc cc cc cc 48 89 fe 48 c7 c7 08 a8 13 9e e8 b7 0a bc ff <0f> 0b 48 89 fe 48 c7 c7 38 a8 13 9e e8 a6 0a bc ff 0f 0b 48 89 fe [ 1950.279416] RSP: 0018:ffffa96d05647e08 EFLAGS: 00010246 [ 1950.279418] RAX: 0000000000000033 RBX: ffff99560d485750 RCX: 0000000000000000 [ 1950.279419] RDX: 0000000000000000 RSI: ffffffff9e107c59 RDI: 00000000ffffffff [ 1950.279420] RBP: ffffffffc19c5168 R08: 0000000000000000 R09: ffffa96d05647cc8 [ 1950.279421] R10: 0000000000000003 R11: ffffffff9ea2a568 R12: 0000000000000000 [ 1950.279422] R13: ffff99560140a2e0 R14: ffff99560127d2e0 R15: 0000000000000000 [ 1950.279422] FS: 00007f67da795380(0000) GS:ffff995d1f0c0000(0000) knlGS:0000000000000000 [ 1950.279424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1950.279424] CR2: 00007f67da7e65c0 CR3: 00000001feed2000 CR4: 0000000000750ee0 [ 1950.279426] PKRU: 55555554 [ 1950.279426] Call Trace: [ 1950.279428] <TASK> [ 1950.279430] hwrng_unregister+0x28/0xe0 [rng_core] [ 1950.279436] tpm_chip_unregister+0xd5/0xf0 [tpm] Add the forgotten !tpm_amd_is_rng_defective() invariant to the hwrng_unregister() call site inside tpm_chip_unregister(). | ||||
| CVE-2023-54079 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq27xxx: Fix poll_interval handling and races on remove Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item. There are 2 problems with this: 1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly 2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0. There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item. Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item. | ||||
| CVE-2023-54095 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix notifiers being shared by PCI and VIO buses fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both PCI and VIO buses. struct notifier_block is a linked list node, so this causes any notifiers later registered to either bus type to also be registered to the other since they share the same node. This causes issues in (at least) the vgaarb code, which registers a notifier for PCI buses. pci_notify() ends up being called on a vio device, converted with to_pci_dev() even though it's not a PCI device, and finally makes a bad access in vga_arbiter_add_pci_device() as discovered with KASAN: BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00 Read of size 4 at addr c000000264c26fdc by task swapper/0/1 Call Trace: dump_stack_lvl+0x1bc/0x2b8 (unreliable) print_report+0x3f4/0xc60 kasan_report+0x244/0x698 __asan_load4+0xe8/0x250 vga_arbiter_add_pci_device+0x60/0xe00 pci_notify+0x88/0x444 notifier_call_chain+0x104/0x320 blocking_notifier_call_chain+0xa0/0x140 device_add+0xac8/0x1d30 device_register+0x58/0x80 vio_register_device_node+0x9ac/0xce0 vio_bus_scan_register_devices+0xc4/0x13c __machine_initcall_pseries_vio_device_init+0x94/0xf0 do_one_initcall+0x12c/0xaa8 kernel_init_freeable+0xa48/0xba8 kernel_init+0x64/0x400 ret_from_kernel_thread+0x5c/0x64 Fix this by creating separate notifier_block structs for each bus type. [mpe: Add #ifdef to fix CONFIG_IBMVIO=n build] | ||||
| CVE-2023-54132 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: stop parsing non-compact HEAD index if clusterofs is invalid Syzbot generated a crafted image [1] with a non-compact HEAD index of clusterofs 33024 while valid numbers should be 0 ~ lclustersize-1, which causes the following unexpected behavior as below: BUG: unable to handle page fault for address: fffff52101a3fff9 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 23ffed067 P4D 23ffed067 PUD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 4398 Comm: kworker/u5:1 Not tainted 6.3.0-rc6-syzkaller-g09a9639e56c0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Workqueue: erofs_worker z_erofs_decompressqueue_work RIP: 0010:z_erofs_decompress_queue+0xb7e/0x2b40 ... Call Trace: <TASK> z_erofs_decompressqueue_work+0x99/0xe0 process_one_work+0x8f6/0x1170 worker_thread+0xa63/0x1210 kthread+0x270/0x300 ret_from_fork+0x1f/0x30 Note that normal images or images using compact indexes are not impacted. Let's fix this now. [1] https://lore.kernel.org/r/000000000000ec75b005ee97fbaa@google.com | ||||
| CVE-2023-54152 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: prevent deadlock by moving j1939_sk_errqueue() This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. | ||||
| CVE-2023-54153 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: turn quotas off if mount failed after enabling quotas Yi found during a review of the patch "ext4: don't BUG on inconsistent journal feature" that when ext4_mark_recovery_complete() returns an error value, the error handling path does not turn off the enabled quotas, which triggers the following kmemleak: ================================================================ unreferenced object 0xffff8cf68678e7c0 (size 64): comm "mount", pid 746, jiffies 4294871231 (age 11.540s) hex dump (first 32 bytes): 00 90 ef 82 f6 8c ff ff 00 00 00 00 41 01 00 00 ............A... c7 00 00 00 bd 00 00 00 0a 00 00 00 48 00 00 00 ............H... backtrace: [<00000000c561ef24>] __kmem_cache_alloc_node+0x4d4/0x880 [<00000000d4e621d7>] kmalloc_trace+0x39/0x140 [<00000000837eee74>] v2_read_file_info+0x18a/0x3a0 [<0000000088f6c877>] dquot_load_quota_sb+0x2ed/0x770 [<00000000340a4782>] dquot_load_quota_inode+0xc6/0x1c0 [<0000000089a18bd5>] ext4_enable_quotas+0x17e/0x3a0 [ext4] [<000000003a0268fa>] __ext4_fill_super+0x3448/0x3910 [ext4] [<00000000b0f2a8a8>] ext4_fill_super+0x13d/0x340 [ext4] [<000000004a9489c4>] get_tree_bdev+0x1dc/0x370 [<000000006e723bf1>] ext4_get_tree+0x1d/0x30 [ext4] [<00000000c7cb663d>] vfs_get_tree+0x31/0x160 [<00000000320e1bed>] do_new_mount+0x1d5/0x480 [<00000000c074654c>] path_mount+0x22e/0xbe0 [<0000000003e97a8e>] do_mount+0x95/0xc0 [<000000002f3d3736>] __x64_sys_mount+0xc4/0x160 [<0000000027d2140c>] do_syscall_64+0x3f/0x90 ================================================================ To solve this problem, we add a "failed_mount10" tag, and call ext4_quota_off_umount() in this tag to release the enabled qoutas. | ||||
| CVE-2023-54158 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't free qgroup space unless specified Boris noticed in his simple quotas testing that he was getting a leak with Sweet Tea's change to subvol create that stopped doing a transaction commit. This was just a side effect of that change. In the delayed inode code we have an optimization that will free extra reservations if we think we can pack a dir item into an already modified leaf. Previously this wouldn't be triggered in the subvolume create case because we'd commit the transaction, it was still possible but much harder to trigger. It could actually be triggered if we did a mkdir && subvol create with qgroups enabled. This occurs because in btrfs_insert_delayed_dir_index(), which gets called when we're adding the dir item, we do the following: btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL); if we're able to skip reserving space. The problem here is that trans->block_rsv points at the temporary block rsv for the subvolume create, which has qgroup reservations in the block rsv. This is a problem because btrfs_block_rsv_release() will do the following: if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) { qgroup_to_release = block_rsv->qgroup_rsv_reserved - block_rsv->qgroup_rsv_size; block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size; } The temporary block rsv just has ->qgroup_rsv_reserved set, ->qgroup_rsv_size == 0. The optimization in btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then later on when we call btrfs_subvolume_release_metadata() which has btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release); btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release); qgroup_to_release is set to 0, and we do not convert the reserved metadata space. The problem here is that the block rsv code has been unconditionally messing with ->qgroup_rsv_reserved, because the main place this is used is delalloc, and any time we call btrfs_block_rsv_release() we do it with qgroup_to_release set, and thus do the proper accounting. The subvolume code is the only other code that uses the qgroup reservation stuff, but it's intermingled with the above optimization, and thus was getting its reservation freed out from underneath it and thus leaking the reserved space. The solution is to simply not mess with the qgroup reservations if we don't have qgroup_to_release set. This works with the existing code as anything that messes with the delalloc reservations always have qgroup_to_release set. This fixes the leak that Boris was observing. | ||||
| CVE-2025-0757 | 1 Hitachi | 1 Vantara Pentaho Business Analytics Server | 2026-04-15 | 4.4 Medium |
| Overview The software does not neutralize or incorrectly neutralize user-controllable input before it is placed in output that is used as a web page that is served to other users. (CWE-79) Description Hitachi Vantara Pentaho Business Analytics Server prior to versions 10.2.0.2, including 9.3.x and 8.3.x, allow a malicious URL to inject content into the Analyzer plugin interface. Impact Once the malicious script is injected, the attacker can perform a variety of malicious activities. The attacker could transfer private information, such as cookies that may include session information, from the victim's machine to the attacker. The attacker could send malicious requests to a web site on behalf of the victim, which could be especially dangerous to the site if the victim has administrator privileges to manage that site. | ||||
| CVE-2025-11125 | 1 Langleyfcu | 1 Online Banking System | 2026-04-15 | 4.3 Medium |
| A vulnerability was found in langleyfcu Online Banking System up to 57437e6400ce0ae240e692c24e6346b8d0c17d7a. Affected by this vulnerability is an unknown functionality of the file /connection_error.php of the component Error Message Handler. Performing manipulation of the argument Error results in cross site scripting. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. | ||||
| CVE-2023-40457 | 1 Extremenetworks | 1 Extremeos | 2026-04-15 | N/A |
| The BGP daemon in Extreme Networks ExtremeXOS (aka EXOS) 30.7.1.1 allows an attacker (who is not on a directly connected network) to cause a denial of service (BGP session reset) because of BGP attribute error mishandling (for attribute 21 and 25). NOTE: the vendor disputes this because it is "evaluating support for RFC 7606 as a future feature" and believes that "customers that have chosen to not require or implement RFC 7606 have done so willingly and with knowledge of what is needed to defend against these types of attacks." | ||||
| CVE-2025-40025 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on node footer for non inode dnode As syzbot reported below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/file.c:1243! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5354 Comm: syz.0.0 Not tainted 6.17.0-rc1-syzkaller-00211-g90d970cade8e #0 PREEMPT(full) RIP: 0010:f2fs_truncate_hole+0x69e/0x6c0 fs/f2fs/file.c:1243 Call Trace: <TASK> f2fs_punch_hole+0x2db/0x330 fs/f2fs/file.c:1306 f2fs_fallocate+0x546/0x990 fs/f2fs/file.c:2018 vfs_fallocate+0x666/0x7e0 fs/open.c:342 ksys_fallocate fs/open.c:366 [inline] __do_sys_fallocate fs/open.c:371 [inline] __se_sys_fallocate fs/open.c:369 [inline] __x64_sys_fallocate+0xc0/0x110 fs/open.c:369 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1e65f8ebe9 w/ a fuzzed image, f2fs may encounter panic due to it detects inconsistent truncation range in direct node in f2fs_truncate_hole(). The root cause is: a non-inode dnode may has the same footer.ino and footer.nid, so the dnode will be parsed as an inode, then ADDRS_PER_PAGE() may return wrong blkaddr count which may be 923 typically, by chance, dn.ofs_in_node is equal to 923, then count can be calculated to 0 in below statement, later it will trigger panic w/ f2fs_bug_on(, count == 0 || ...). count = min(end_offset - dn.ofs_in_node, pg_end - pg_start); This patch introduces a new node_type NODE_TYPE_NON_INODE, then allowing passing the new_type to sanity_check_node_footer in f2fs_get_node_folio() to detect corruption that a non-inode dnode has the same footer.ino and footer.nid. Scripts to reproduce: mkfs.f2fs -f /dev/vdb mount /dev/vdb /mnt/f2fs touch /mnt/f2fs/foo touch /mnt/f2fs/bar dd if=/dev/zero of=/mnt/f2fs/foo bs=1M count=8 umount /mnt/f2fs inject.f2fs --node --mb i_nid --nid 4 --idx 0 --val 5 /dev/vdb mount /dev/vdb /mnt/f2fs xfs_io /mnt/f2fs/foo -c "fpunch 6984k 4k" | ||||
| CVE-2025-4009 | 2026-04-15 | N/A | ||
| The Evertz SDVN 3080ipx-10G is a High Bandwidth Ethernet Switching Fabric for Video Application. This device exposes a web management interface on port 80. This web management interface can be used by administrators to control product features, setup network switching, and register license among other features. The application has been developed in PHP with the webEASY SDK, also named ‘ewb’ by Evertz. This web interface has two endpoints that are vulnerable to arbitrary command injection (CVE-2025-4009, CVE-2025-10364) and the authentication mechanism has a flaw leading to authentication bypass (CVE-2025-10365). CVE-2025-4009 covers the command injection in feature-transfer-import.php CVE-2025-10364 covers the command injection in feature-transfer-export.php Remote unauthenticated attackers can gain arbitrary command execution with elevated privileges ( root ) on affected devices. This level of access could lead to serious business impact such as the interruption of media streaming, modification of media being streamed, alteration of closed captions being generated, among others. | ||||
| CVE-2025-54799 | 1 Lego Project | 1 Lego | 2026-04-15 | 5.3 Medium |
| Let's Encrypt client and ACME library written in Go (Lego). In versions 4.25.1 and below, the github.com/go-acme/lego/v4/acme/api package (thus the lego library and the lego cli as well) don't enforce HTTPS when talking to CAs as an ACME client. Unlike the http-01 challenge which solves an ACME challenge over unencrypted HTTP, the ACME protocol requires HTTPS when a client communicates with the CA to performs ACME functions. However, the library fails to enforce HTTPS both in the original discover URL (configured by the library user) and in the subsequent addresses returned by the CAs in the directory and order objects. If users input HTTP URLs or CAs misconfigure endpoints, protocol operations occur over HTTP instead of HTTPS. This compromises privacy by exposing request/response details like account and request identifiers to network attackers. This was fixed in version 4.25.2. | ||||
| CVE-2025-27416 | 2026-04-15 | N/A | ||
| Scratch-Coding-Hut.github.io is the website for Coding Hut. The website as of 28 February 2025 contained a sign in with scratch username and password form. Any user who used the sign in page would be susceptible to any other user signing into their account. As of time of publication, a fix is not available but work on a fix is underway. As a workaround, users should avoid signing in. | ||||
| CVE-2012-10029 | 1 Nagios | 4 Nagios, Nagios Xi, Xi and 1 more | 2026-04-15 | N/A |
| Nagios XI Network Monitor prior to Graph Explorer component version 1.3 contains a command injection vulnerability in `visApi.php`. An authenticated user can inject system commands via unsanitized parameters such as `host`, resulting in remote code execution. | ||||
| CVE-2013-10066 | 1 Kordil Edms Project | 1 Kordil Edms | 2026-04-15 | N/A |
| An unauthenticated arbitrary file upload vulnerability exists in Kordil EDMS v2.2.60rc3. The application exposes an upload endpoint (users_add.php) that allows attackers to upload files to the /userpictures/ directory without authentication. This flaw enables remote code execution by uploading a PHP payload and invoking it via a direct HTTP request. | ||||
| CVE-2013-10070 | 1 Php-charts | 1 Php-charts | 2026-04-15 | N/A |
| PHP-Charts v1.0 contains a PHP code execution vulnerability in wizard/url.php, where user-supplied GET parameter names are passed directly to eval() without sanitization. A remote attacker can exploit this flaw by crafting a request that injects arbitrary PHP code, resulting in command execution under the web server's context. The vulnerability allows unauthenticated attackers to execute system-level commands via base64-encoded payloads embedded in parameter names, leading to full compromise of the host system. | ||||
| CVE-2024-9310 | 2026-04-15 | N/A | ||
| By utilizing software-defined radios and a custom low-latency processing pipeline, RF signals with spoofed location data can be transmitted to aircraft targets. This can lead to the appearance of fake aircraft on displays and potentially trigger undesired Resolution Advisories (RAs). | ||||
| CVE-2025-27144 | 1 Redhat | 10 Advanced Cluster Security, Enterprise Linux, Logging and 7 more | 2026-04-15 | 7.5 High |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. In versions on the 4.x branch prior to version 4.0.5, when parsing compact JWS or JWE input, Go JOSE could use excessive memory. The code used strings.Split(token, ".") to split JWT tokens, which is vulnerable to excessive memory consumption when processing maliciously crafted tokens with a large number of `.` characters. An attacker could exploit this by sending numerous malformed tokens, leading to memory exhaustion and a Denial of Service. Version 4.0.5 fixes this issue. As a workaround, applications could pre-validate that payloads passed to Go JOSE do not contain an excessive number of `.` characters. | ||||