Export limit exceeded: 19589 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19589 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45912 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't cache extent during splitting extent Caching extents during the splitting process is risky, as it may result in stale extents remaining in the status tree. Moreover, in most cases, the corresponding extent block entries are likely already cached before the split happens, making caching here not particularly useful. Assume we have an unwritten extent, and then DIO writes the first half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, when ext4_split_extent_at() splits this extent, it truncates the existing extent and then inserts a new one. During this process, this extent status entry may be shrunk, and calls to ext4_find_extent() and ext4_cache_extents() may occur, which could potentially insert the truncated range as a hole into the extent status tree. After the split is completed, this hole is not replaced with the correct status. [UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent [UUUUUUU|HHHHHHHH] extent status tree H: hole Then, the outer calling functions will not correct this remaining hole extent either. Finally, if we perform a delayed buffer write on this latter part, it will re-insert the delayed extent and cause an error in space accounting. In adition, if the unwritten extent cache is not shrunk during the splitting, ext4_cache_extents() also conflicts with existing extents when caching extents. In the future, we will add checks when caching extents, which will trigger a warning. Therefore, Do not cache extents that are being split. | ||||
| CVE-2026-45923 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: catc: enable basic endpoint checking catc_probe() fills three URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX - usb_rcvintpipe(usbdev, 2) for interrupt status A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a catc_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls after usb_set_interface() to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time. Similar to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") which fixed the issue in rtl8150. | ||||
| CVE-2026-45871 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm: st33zp24: Fix missing cleanup on get_burstcount() error get_burstcount() can return -EBUSY on timeout. When this happens, st33zp24_send() returns directly without releasing the locality acquired earlier. Use goto out_err to ensure proper cleanup when get_burstcount() fails. | ||||
| CVE-2026-45913 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: always update mdb_n_entries for vlan contexts syzbot triggered a warning[1] about the number of mdb entries in a context. It turned out that there are multiple ways to trigger that warning today (some got added during the years), the root cause of the problem is that the increase is done conditionally, and over the years these different conditions increased so there were new ways to trigger the warning, that is to do a decrease which wasn't paired with a previous increase. For example one way to trigger it is with flush: $ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1 $ ip l add dumdum up master br0 type dummy $ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1 $ ip link set dev br0 down $ ip link set dev br0 type bridge mcast_vlan_snooping 1 ^^^^ this will enable snooping, but will not update mdb_n_entries because in __br_multicast_enable_port_ctx() we check !netif_running $ bridge mdb flush dev br0 ^^^ this will trigger the warning because it will delete the pg which we added above, which will try to decrease mdb_n_entries Fix the problem by removing the conditional increase and always keep the count up-to-date while the vlan exists. In order to do that we have to first initialize it on port-vlan context creation, and then always increase or decrease the value regardless of mcast options. To keep the current behaviour we have to enforce the mdb limit only if the context is port's or if the port-vlan's mcast snooping is enabled. [1] ------------[ cut here ]------------ n == 0 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043 Modules linked in: CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline] RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline] RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825 Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b RSP: 0018:ffffc9000c207220 EFLAGS: 00010293 RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800 R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238 FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0 Call Trace: <TASK> br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline] br_mdb_flush net/bridge/br_mdb.c:1544 [inline] br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561 rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1 rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_sendmsg+0x2a5/0x360 net/socke ---truncated--- | ||||
| CVE-2026-45853 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges() amdgpu_discovery_get_nps_info() internally allocates memory for ranges using kvcalloc(), which may use vmalloc() for large allocation. Using kfree() to release vmalloc memory will lead to a memory corruption. Use kvfree() to safely handle both kmalloc and vmalloc allocations. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-45936 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: goldfish: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | ||||
| CVE-2026-46091 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: heed coherency rules In a control request, the USB request structure can be subject to DMA on some HCs. Hence it must obey the rules for DMA coherency. Allocate it separately. | ||||
| CVE-2026-46095 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: raise barrier before state machine transition Move the barrier raise operation before calling llbitmap_state_machine() in both llbitmap_start_write() and llbitmap_start_discard(). This ensures the barrier is in place before any state transitions occur, preventing potential race conditions where the state machine could complete before the barrier is properly raised. | ||||
| CVE-2026-45934 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation I have been observing a number of systems aborting at insert_dev_extents() in btrfs_create_pending_block_groups(). The following is a sample stack trace of such an abort coming from forced chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this can theoretically happen to any DUP chunk allocation. [81.801] ------------[ cut here ]------------ [81.801] BTRFS: Transaction aborted (error -17) [81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319 [81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk [81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE [81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 [81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs] [81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282 [81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000 [81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0 [81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007 [81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000 [81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000 [81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000 [81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0 [81.810] Call Trace: [81.810] <TASK> [81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs] [81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs] [81.811] kernfs_fop_write_iter+0x15f/0x240 [81.812] vfs_write+0x264/0x500 [81.812] ksys_write+0x6c/0xe0 [81.812] do_syscall_64+0x66/0x770 [81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e [81.813] RIP: 0033:0x7fec6be66197 [81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197 [81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001 [81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000 [81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002 [81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0 [81.817] </TASK> [81.817] irq event stamp: 20039 [81.818] hardirqs last enabled at (20047): [<ffffffff99a68302>] __up_console_sem+0x52/0x60 [81.818] hardirqs last disabled at (20056): [<ffffffff99a682e7>] __up_console_sem+0x37/0x60 [81.819] softirqs last enabled at (19470): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0 [81.819] softirqs last disabled at (19463): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0 [81.820] ---[ end trace 0000000000000000 ]--- [81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already exists Inspecting these aborts with drgn, I observed a pattern of overlapping chunk_maps. Note how stripe 1 of the first chunk overlaps in physical address with stripe 0 of the second chunk. Physical Start Physical End Length Logical Type Stripe ---------------------------------------------------------------------------------------------------- 0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/2 0x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/2 0x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/2 0x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2 Now how could this possibly happen? All chunk allocation is ---truncated--- | ||||
| CVE-2026-45900 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix netdev memory leak in dpaa2_caam_probe When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in dpaa2") converted embedded net_device to dynamically allocated pointers, it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in dpaa2_dpseci_free() for error paths. This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe due to DPIO devices not being ready yet. The kernel's deferred probe mechanism handles the retry successfully, but the netdevs allocated during the failed probe attempt are never freed, resulting in kmemleak reports showing multiple leaked netdev-related allocations all traced back to dpaa2_caam_probe(). Fix this by preserving the CPU mask of allocated netdevs during setup and using it for cleanup in dpaa2_dpseci_free(). This approach ensures that only the CPUs that actually had netdevs allocated will be cleaned up, avoiding potential issues with CPU hotplug scenarios. | ||||
| CVE-2026-45902 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | ||||
| CVE-2026-45864 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent infinite loops caused by the next valid being the same When processing valid within the range [valid : pos), if valid cannot be retrieved correctly, for example, if the retrieved valid value is always the same, this can trigger a potential infinite loop, similar to the hung problem reported by syzbot [1]. Adding a check for the valid value within the loop body, and terminating the loop and returning -EINVAL if the value is the same as the current value, can prevent this. [1] INFO: task syz.4.21:6056 blocked for more than 143 seconds. Call Trace: rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244 inode_lock include/linux/fs.h:1027 [inline] ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 | ||||
| CVE-2026-45922 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function allocates memory for the device path using kobject_get_path(). If the length of the device path exceeds the output buffer length, the function returns -ENOSPC but does not free the allocated memory, resulting in a memory leak. Add a kfree() call to the error path to ensure the allocated memory is properly freed. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-45888 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix memory leak in raid1_run() raid1_run() calls setup_conf() which registers a thread via md_register_thread(). If raid1_set_limits() fails, the previously registered thread is not unregistered, resulting in a memory leak of the md_thread structure and the thread resource itself. Add md_unregister_thread() to the error path to properly cleanup the thread, which aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-45915 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fat: avoid parent link count underflow in rmdir Corrupted FAT images can leave a directory inode with an incorrect i_nlink (e.g. 2 even though subdirectories exist). rmdir then unconditionally calls drop_nlink(dir) and can drive i_nlink to 0, triggering the WARN_ON in drop_nlink(). Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the parent link count when it is at least 3, otherwise report a filesystem error. | ||||
| CVE-2026-45918 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - don't deref NULL sk_socket member after tcp_close() When deleting a peer in case of keepalive expiration, the peer is removed from the OpenVPN hashtable and is temporary inserted in a "release list" for further processing. This happens in: ovpn_peer_keepalive_work() unlock_ovpn(release_list) This processing includes detaching from the socket being used to talk to this peer, by restoring its original proto and socket ops/callbacks. In case of TCP it may happen that, while the peer is sitting in the release list, userspace decides to close the socket. This will result in a concurrent execution of: tcp_close(sk) __tcp_close(sk) sock_orphan(sk) sk_set_socket(sk, NULL) The last function call will set sk->sk_socket to NULL. When the releasing routine is resumed, ovpn_tcp_socket_detach() will attempt to dereference sk->sk_socket to restore its original ops member. This operation will crash due to sk->sk_socket being NULL. Fix this race condition by testing-and-accessing sk->sk_socket atomically under sk->sk_callback_lock. | ||||
| CVE-2026-45908 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix memory leak in amdxdna_ubuf_map The amdxdna_ubuf_map() function allocates memory for sg and internal sg table structures, but it fails to free them if subsequent operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. | ||||
| CVE-2026-45877 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients During a warm reset flow, the cl->device pointer may be NULL if the reset occurs while clients are still being enumerated. Accessing cl->device->reference_count without a NULL check leads to a kernel panic. This issue was identified during multi-unit warm reboot stress clycles. Add a defensive NULL check for cl->device to ensure stability under such intensive testing conditions. KASAN: null-ptr-deref in range [0000000000000000-0000000000000007] Workqueue: ish_fw_update_wq fw_reset_work_fn Call Trace: ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp] ishtp_reset_handler+0x85/0x1a0 [intel_ishtp] fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc] | ||||
| CVE-2026-46086 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use a stable FDB dst snapshot in RCU readers Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns. | ||||
| CVE-2026-46092 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | ||||