Export limit exceeded: 360855 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360855 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53205 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices. | ||||
| CVE-2026-53204 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-rsu: Fix NULL deref on rsu_send_msg() timeout in probe rsu_send_msg() can return -ETIMEDOUT when wait_for_completion_interruptible_timeout() fires while the SMC call is still pending. In stratix10_rsu_probe(), the error paths for COMMAND_RSU_DCMF_VERSION, COMMAND_RSU_DCMF_STATUS, COMMAND_RSU_MAX_RETRY and COMMAND_RSU_GET_SPT_TABLE call stratix10_svc_free_channel() - which sets chan->scl to NULL - but then fall through and queue the next request on the same channel. The next svc kthread that runs will dereference pdata->chan->scl in its receive callback path, triggering a NULL pointer dereference identical to the one fixed by commit c45f7263100c ("firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled") for the COMMAND_RSU_STATUS path. Apply the same cleanup pattern to the remaining failure paths: remove the async client, free the channel, and return early so no further messages are queued on a channel whose scl has been cleared. While at it, clean up stratix10_rsu_probe() in two ways without changing behavior: - Drop redundant zero-initialization of fields already cleared by devm_kzalloc(): client.receive_cb, status.* and spt0/1_address (INVALID_SPT_ADDRESS is 0x0). - Replace five identical 3-line error-cleanup blocks (stratix10_svc_remove_async_client() + stratix10_svc_free_channel() + return ret) with goto labels (remove_async_client, free_channel), matching the standard kernel resource-unwinding pattern and making it easier to extend the probe sequence without forgetting matching cleanup. Also move init_completion() next to mutex_init() so sync-primitive initialization is grouped before anything that could trigger a callback. --- v2: Add a minor clean-up of the function stratix10_rsu_probe() to have a centralize exit for all the rsu_send_async_msg() and rsu_send_msg(). | ||||
| CVE-2026-53203 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add buffer overflow check in MS get_info_ioctl Add validation that the info size returned from the metric stream info query is not exceeded when checked against the allocated buffer size. If the firmware returns a size larger than the buffer, reject the operation with -EOVERFLOW instead of proceeding with an incorrect buffer copy. | ||||
| CVE-2026-53202 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix signed integer truncation in IPC receive Fix potential buffer overflow where firmware-supplied data_size is cast to signed int before being used in min_t(). Large unsigned values (>= 0x80000000) become negative, causing unsigned wraparound and oversized memcpy operations that can overflow the stack buffer. Change min_t(int, ...) to min() as both values are unsigned and can be handled by min() without explicit cast. | ||||
| CVE-2026-53201 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend" This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6. The idle-skip optimization bypasses GuC suspend, so the GPU may not perform the context switch that flushes TLB entries for invalidated userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB invalidation and page faults during userptr invalidation tests. Restore unconditional schedule toggling on suspend so the context-switch TLB flush is always performed. This optimization will be reintroduced with a fix that does not skip suspend in LR/preempt-fence VM mode. (cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) | ||||
| CVE-2026-53200 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix handling of XN[0] when !FEAT_XNX XN has already been extracted from its bitfield position so using FIELD_PREP() on the mask that clears XN[0] is completely broken, having the effect of unconditionally granting execute permissions... Fix the obvious mistake by manipulating the right bit. | ||||
| CVE-2026-53199 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries. The copy path only handles packets smaller than the send section size (6144 bytes by default); larger packets take the cp_partial path where only the RNDIS header is copied. So entries here are bounded by the section size and a copy is split at most once on 4K-page systems. On !CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and no mapping work is added. | ||||
| CVE-2026-53198 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on conn->async_requests via setup_async_work(), with cancel_fn = smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock. When the request is cancelled, the worker frees the file_lock with locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never reaches release_async_work() -- the only site that unlinks the work from conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays matchable on async_requests with a live cancel_fn pointing at the freed file_lock, until connection teardown finally runs release_async_work(). smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (cancelled branch) ... cache file_lock_cache of size 192 Reproduced on mainline with KASAN by an authenticated SMB client. Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback cannot be fired a second time. | ||||
| CVE-2026-53197 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state() iptfs_destroy_state() calls hrtimer_cancel() while holding a spinlock that the timer callback also acquires, leading to an ABBA deadlock on SMP systems. For the output timer (iptfs_timer): - iptfs_destroy_state() holds x->lock, calls hrtimer_cancel() - iptfs_delay_timer() callback takes x->lock For the drop timer (drop_timer): - iptfs_destroy_state() holds drop_lock, calls hrtimer_cancel() - iptfs_drop_timer() callback takes drop_lock Both timers use HRTIMER_MODE_REL_SOFT, so their callbacks run in softirq context. When hrtimer_cancel() is called for a soft timer that is currently executing on another CPU, hrtimer_cancel_wait_running() spins on softirq_expiry_lock -- the same lock held by the softirq running the callback. If the callback is blocked waiting for the spinlock held by the caller of hrtimer_cancel(), a circular dependency forms: CPU 0: holds lock_A -> waits for softirq_expiry_lock CPU 1: holds softirq_expiry_lock -> waits for lock_A Fix by calling hrtimer_cancel() before acquiring the respective locks. hrtimer_cancel() is safe to call without holding any lock and will wait for any in-progress callback to complete. For the output timer, the lock is still acquired afterwards to drain the packet queue. For the drop timer, the lock/unlock pair is removed entirely since it only existed to serialize with the timer callback, which hrtimer_cancel() already guarantees. Found by source code audit. | ||||
| CVE-2026-53196 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ] | ||||
| CVE-2026-53195 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space. | ||||
| CVE-2026-53194 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied. | ||||
| CVE-2026-53193 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Forcibly close timer instances at closing When snd_timer object is freed via snd_timer_free() and still pending snd_timer_instance objects are assigned to the timer object, it tries to unlink all instances and just set NULL to each ti->timer, then releases the resources immediately. The problem is, however, when there are slave timer instances that are associated with a master instance linked to this timer: namely, those slave instances still point to the freed timer object although the master instance is unlinked, which may lead to user-after-free. The bug can be easily triggered particularly when a new userspace-driven timers (CONFIG_SND_UTIMER) is involved, since it can create and delete the timer object via a simple file open/close, while the other applications may keep accessing to that timer. This patch is an attempt to paper over the problem above: now instead of just unlinking, call snd_timer_close[_locked]() forcibly for each pending timer instance, so that all assigned slave timer instances are properly detached, too. Since snd_timer_close() might be called later by the driver that created that instance, the check of SNDRV_TIMER_IFLG_DEAD is added at the beginning, too. | ||||
| CVE-2026-53192 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Fix UAF at snd_timer_user_params() At releasing a timer object, e.g. when a userspace timer (CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it tries to detach the timer instances and release the resources. However, it's still possible that other in-flight tasks are holding the timer instance where the to-be-deleted timer object is associated, and this may lead to racy accesses. Fortunately, most of ioctls dealing with the timer instance list already have the protection with register_mutex, and this also avoids such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the concurrent ioctl may lead to use-after-free. This patch just adds the guard with register_mutex to protect snd_timer_user_params() for covering the code path as a quick workaround. It's no hot-path but rather a rarely issued ioctl, so the performance penalty doesn't matter. | ||||
| CVE-2026-53191 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries When a bundle recv retries inside io_recv_finish(), the merge logic OR the saved cflags from the previous iteration with the cflags returned by the new iteration: cflags = req->cqe.flags | (cflags & CQE_F_MASK); Bits listed in CQE_F_MASK are inherited from the new iteration, and all other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the saved cflags. Before this change CQE_F_MASK covered only IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE. When using provided buffer rings (IOU_PBUF_RING_INC) with incremental mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring entry partially consumed, __io_put_kbufs() then sets IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the buffer ID will be reused for subsequent completions. Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above silently dropped it whenever the final retry iteration partially consumed the buffer, and the subsequent req->cqe.flags = cflags & ~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the carried-over cflags had one been present. Userspace would then wrongfully advance it ring head past an entry the kernel still uses. Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the new iteration into the user-visible CQE and stripped from the saved cflags between iterations. | ||||
| CVE-2026-53190 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait() dma_fence_unwrap_for_each() internally calls dma_fence_unwrap_first() which does cursor->chain = dma_fence_get(head), taking an extra reference. On normal loop completion, dma_fence_unwrap_next() releases this via dma_fence_chain_walk() -> dma_fence_put(). When virtio_gpu_do_fence_wait() fails and the function returns early from inside the loop, the cursor->chain reference is never released. This is the only caller in the entire kernel that does an early return inside dma_fence_unwrap_for_each. Add dma_fence_put(itr.chain) before the early return. | ||||
| CVE-2026-53189 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: update file PMD counter before folio_put() __split_huge_pmd_locked() updates the file/shmem RSS counter after dropping the PMD mapping's folio reference. If folio_put() drops the last reference, mm_counter_file() can later read freed folio state via folio_test_swapbacked(). Move the counter update before folio_put(). | ||||
| CVE-2026-53188 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate the passed in fops for ib_get_ucaps() Sashiko pointed out it is not safe to rely only on the devt because char/block alias so if the user finds a block device with the same dev_t it can masquerade as a ucap cdev fd. Test the f_ops to only accept authentic cdevs. | ||||
| CVE-2026-53187 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc The cpu_id attribute supplied by user space through UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu() without first verifying that the value is within the valid CPU range. Passing such untrusted data to cpumask_test_cpu() may lead to an out-of-bounds read of the underlying cpumask bitmap: the helper expands to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with no bound check. In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this turns a bad user input into a machine reboot. Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL before it is used. Reported by Smatch. | ||||
| CVE-2026-53186 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: bound SRP_RSP sense copy by the received length srp_process_rsp() copies sense data from rsp->data + resp_data_len, where resp_data_len is the full 32-bit value supplied by the SRP target and is never checked against the number of bytes actually received (wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so at most 96 bytes are copied, but the source offset is not bounded. A malicious or compromised SRP target on the InfiniBand/RoCE fabric that the initiator has logged into can return an SRP_RSP with SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer is allocated at the target-chosen max_ti_iu_len, so the source of the sense copy lands past the bytes actually received; with resp_data_len near 0xFFFFFFFF it is gigabytes past the buffer and the read faults. Copy the sense data only if it has not been truncated, that is, only if the response header, the response data, and the sense region fit within the bytes actually received; otherwise drop the sense and log. The in-tree iSER and NVMe-RDMA receive paths already bound their parse by wc->byte_len; this brings ib_srp into line with them. | ||||