Export limit exceeded: 378312 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378312 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74378 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue buffer, which is mapped into userspace. It validates num_sge against max_sge, but then re-reads the same field to calculate the memcpy size. A concurrent userspace thread can modify num_sge between validation and use, causing a heap buffer overflow when copying the WQE into qp->resp.srq_wqe. Read num_sge into a local variable and use it for both the bounds check and the size calculation. | ||||
| CVE-2026-74375 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix deadlock in read error recovery path raid1d and raid10d may resubmit a split md cloned bio while handling a read error. In this case, resubmitting the bio can lead to a deadlock if the array is suspended before md_handle_request() acquires an active_io reference via percpu_ref_tryget_live(). Since the cloned bio already holds an active_io reference, trying to acquire another reference via percpu_ref_tryget_live() can lead to a deadlock while the array is suspended. Fix this by using percpu_ref_get() for md cloned bios. | ||||
| CVE-2026-74374 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix error-path detection with md_cloned_bio() Detect the error path using md_cloned_bio() instead of relying on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be NULL or -1 after splitting and resubmitting a failed bio. As a result, the error path may not be recognized and memory allocations can incorrectly use GFP_NOIO instead of (GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under memory pressure. | ||||
| CVE-2026-74372 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: raid1: fix nr_pending leak in REQ_ATOMIC bad-block error path In raid1_write_request(), each per-mirror loop iteration begins by incrementing rdev->nr_pending. If a REQ_ATOMIC write encounters a badblock within the requested range, the code jumps to err_handle without dropping the reference taken for the current mirror. err_handle's cleanup loop will only decrements for k < i and r1_bio->bios[k] is non-NULL. The current slot is therefore skipped, leaving its nr_pending reference leaked permanently. The reference prevents the rdev from ever being removed, since raid1_remove_conf() refuses to remove an rdev with nr_pending > 0. Fix this by calling rdev_dec_pending() before jumping to err_handle. | ||||
| CVE-2026-74367 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix inconsistent arvif state in vdev_create error paths ath12k_mac_vdev_create() has three error path issues that leave arvif in an inconsistent state: 1. When ath12k_wmi_vdev_create() fails, the function returns directly without clearing arvif->ar, which was already set before the WMI call. Subsequent code checking arvif->ar to determine vdev readiness will see a non-NULL value despite no vdev existing in firmware. 2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the code jumped to err: skipping the DP peer cleanup and vdev rollback, leaving num_created_vdevs, vdev maps and arvif list membership live. 3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to err_vdev_del: skipping the DP peer cleanup. Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead of returning directly, routing both err_peer_del failure paths through err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating the arvif state cleanup at err:. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74366 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL deref in change_sta_links for unready link _ieee80211_set_active_links() calls _ieee80211_link_use_channel() for each newly-added link and WARN_ON_ONCE()s if it fails. The call uses assign_on_failure=true, which allows mac80211 to continue despite driver failures, but when a mac80211-level channel validation fails (e.g., combinations check, DFS, or no available radio), drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create() is only called from that path, arvif->is_created remains false and arvif->ar remains NULL for the failed link. The subsequent drv_change_sta_links() call reaches ath12k_mac_op_change_sta_links(), which allocates an arsta and sets ahsta->links_map |= BIT(link_id) for the broken link before checking whether the link is ready. When the vdev was never created, only station_add() is skipped, but the link remains in links_map. Any subsequent operation iterating links_map and dereferencing arvif->ar without a NULL check will crash. Two observed examples are NULL deref in ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key() when wpa_supplicant installs PTK keys. BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] Call trace: ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k] drv_sta_state+0x100/0xbd8 [mac80211] __sta_info_destroy_part2+0x148/0x178 [mac80211] ieee80211_set_disassoc+0x500/0x678 [mac80211] BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] Call trace: ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] drv_set_key+0x70/0x100 [mac80211] ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211] ieee80211_add_key+0x16c/0x2ac [mac80211] nl80211_new_key+0x138/0x280 [cfg80211] Fix this by checking arvif->is_created before calling ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from entering links_map, so all subsequent operations iterating the bitmap are protected. The reliability of arvif->is_created across all error paths is ensured by the preceding patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74337 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NMI/tracepoint re-entry deadlock on lru locks NMI and tracepoint BPF programs can re-enter the per-CPU or global LRU lock that bpf_lru_pop_free()/push_free() already hold on the same CPU, AA-deadlocking. Lockdep reports "inconsistent {INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5) and "possible recursive locking detected" on &loc_l->lock (syzbot 18b26edb69b2e19f3b33). Prior trylock and rqspinlock based fixes (see links) were nacked because compromised on reliability. This patch converts every LRU lock site to rqspinlock_t and adds a recovery path for some failure windows to avoid node leaks. Failure recovery: - *_pop_free top-level: return NULL; prealloc_lru_pop() already treats that as no-free-element (-ENOMEM). - Cross-CPU steal: skip the victim's locked loc_l, try next CPU. - Post-steal local lock fail: publish stolen node to lockless per-CPU free_llist; next pop on this CPU picks it up. - push_free fail: mark node pending_free=1. __local_list_flush(), __local_list_pop_pending() reclaim the node from pending_list. __bpf_lru_list_shrink_inactive() reclaims the node from inactive list. Nodes from active list are reclaimed by __bpf_lru_list_shrink() or after __bpf_lru_list_rotate_active() demotes it to the inactive. | ||||
| CVE-2026-74331 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix recursive lock in device_cache_fw_images() A recursive locking deadlock can occur in the firmware loader's power management notification handler. During system suspend or hibernation preparation, fw_pm_notify() calls device_cache_fw_images(). This function acquires fw_lock to set the firmware cache state to FW_LOADER_START_CACHE and then iterates over all devices using dpm_for_each_dev() while still holding the lock. For each device, dev_cache_fw_image() schedules asynchronous work to cache the firmware. If memory allocation for the async work entry fails (e.g., in out-of-memory conditions), async_schedule_node_domain() falls back to executing the work function synchronously in the current thread. The synchronous execution path (__async_dev_cache_fw_image() -> cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire fw_lock again. Since the current thread already holds fw_lock, this results in a recursive locking deadlock. Fix this by releasing fw_lock immediately after updating the cache state and before calling dpm_for_each_dev(). The lock is only needed to protect the state update. Concurrent firmware requests will correctly see the FW_LOADER_START_CACHE state and use the piggyback mechanism, which is independently protected by its own fwc->name_lock. | ||||
| CVE-2026-74310 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vhost/net: complete zerocopy ubufs only once vhost-net initializes one ubuf_info per outstanding zerocopy TX descriptor and hands it to the backend socket. The networking stack may then clone a zerocopy skb before all skb references are released. For example, batman-adv fragmentation reaches skb_split(), which calls skb_zerocopy_clone() and increments the same ubuf_info refcount. vhost_zerocopy_complete() currently treats every ubuf callback as a completed vhost descriptor. It dereferences ubuf->ctx, writes the descriptor completion state, and drops the vhost_net_ubuf_ref even when the callback only releases a cloned skb reference. A backend reset can therefore wait for and free the vhost_net_ubuf_ref while another cloned skb still carries the same ubuf_info. A later completion then dereferences the freed ubufs pointer. KASAN reports the stale completion as: BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x1d7/0x1f0 BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x101/0x1f0 vhost_zerocopy_complete skb_copy_ubufs __dev_forward_skb2 veth_xmit The freed object was allocated from vhost_net_ioctl() while setting the backend and freed through kfree_rcu()/kvfree_rcu_bulk after backend removal, while delayed skb completion still reached vhost_zerocopy_complete(). Honor the generic ubuf_info refcount before touching vhost state, and run the vhost descriptor completion only for the final ubuf reference. This matches the msg_zerocopy_complete() ownership rule for cloned zerocopy skbs. | ||||
| CVE-2026-74290 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: Dont expose folded kernel pointers The flow classifier falls back to addr_fold() for fields that are missing from packet headers. In map mode, userspace controls mask, xor, rshift, addend and divisor, and can observe the resulting classid through class statistics. This allows a tc classifier in a user/network namespace to recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct(). Align with standard kernel practices for pointer hashing and replace the XOR folding with a keyed siphash (which is cryptographically secure) | ||||
| CVE-2026-74279 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: cavium/cpt - fix DMA cleanup using wrong loop index The sg_cleanup error path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one. | ||||
| CVE-2026-74259 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cifs: remove all cifs files before kill super Cifs files may be put into fileinfo_put_wq during umounting cifs. After umount done, cifsFileInfo_put_final is called, which cause following BUG: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 134.222152] list_lru_add+0x64/0x1a0 [ 134.222399] ? cifs_put_tcon+0x171/0x340 [cifs] [ 134.222772] d_lru_add+0x44/0x60 [ 134.222997] dput+0x1fc/0x210 [ 134.223213] cifsFileInfo_put_final+0x11a/0x140 [cifs] [ 134.223576] process_one_work+0x17c/0x320 [ 134.223843] worker_thread+0x188/0x280 [ 134.224084] ? __pfx_worker_thread+0x10/0x10 [ 134.224366] kthread+0xcc/0x100 [ 134.224576] ? __pfx_kthread+0x10/0x10 [ 134.224827] ret_from_fork+0x30/0x50 [ 134.225063] ? __pfx_kthread+0x10/0x10 [ 134.225328] ret_from_fork_asm+0x1b/0x30 This can be reproduce by following: unshare -n bash -c " mkdir -p ${CIFS_MNT} ip netns attach root 1 ip link add eth0 type veth peer veth0 netns root ip link set eth0 up ip -n root link set veth0 up ip addr add 192.168.0.2/24 dev eth0 ip -n root addr add 192.168.0.1/24 dev veth0 ip route add default via 192.168.0.1 dev eth0 ip netns exec root sysctl net.ipv4.ip_forward=1 ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1 touch ${CIFS_MNT}/a.txt ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE " umount ${CIFS_MNT} | ||||
| CVE-2026-72498 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid displaying the kernel pointer While dumping the info on MR using the rdma tool, we dump the mr_hwq which is a kernel pointer. There is no need to expose this value for end user. So avoid it. | ||||
| CVE-2026-72494 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Replace waitqueue and flag with completion The driver previously used a waitqueue along with an explicit request_done flag, but without proper barriers around request_done. An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted to fix this by adding the missing memory barriers. Rather than adding the barriers, this patch replaces the waitqueue+flag with a completion, which is designed for this exact purpose. | ||||
| CVE-2026-72492 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in same_client_has_lease() same_client_has_lease() returns an opinfo pointer from ci->m_op_list after dropping ci->m_lock without taking a reference. smb_grant_oplock() then dereferences that pointer in copy_lease() and when checking breaking_cnt. A concurrent close can remove the old lease from ci->m_op_list and drop the last reference before the caller uses the returned pointer, leading to a use-after-free. Take a reference when same_client_has_lease() selects an existing lease, drop any previous match while scanning, and release the returned reference in smb_grant_oplock() after copying the lease state. | ||||
| CVE-2026-72485 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: platform: defer connection counter increment until alloc succeeds coresight_add_out_conn() increments nr_outconns before calling devm_krealloc_array() and again before devm_kmalloc(). If either allocation fails, the counter is already bumped while the corresponding array entry is NULL or uninitialized garbage. coresight_add_in_conn() has the same problem with nr_inconns and devm_krealloc_array(). In both cases the probe returns -ENOMEM, which causes coresight_get_platform_data() to call coresight_release_platform_data() for cleanup. That function iterates up to nr_outconns (or nr_inconns) entries and dereferences each pointer unconditionally, hitting the NULL or garbage entry and panicking instead of failing gracefully. Fix by moving the counter increments to after all allocations succeed, so the struct is always consistent on any error path. | ||||
| CVE-2026-72484 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: most: video: avoid double free on video register failure comp_register_videodev() allocates a video_device with video_device_alloc() and releases it if video_register_device() fails. This can double free the video_device when __video_register_device() reaches device_register() and that call fails: video_register_device() -> __video_register_device() -> device_register() fails -> put_device(&vdev->dev) -> v4l2_device_release() -> vdev->release(vdev) -> video_device_release(vdev) comp_register_videodev() -> video_device_release(mdev->vdev) Use video_device_release_empty() while registering the device so that registration failure paths do not free mdev->vdev through vdev->release(). comp_register_videodev() then releases mdev->vdev exactly once on failure. Restore video_device_release() after successful registration so the registered device keeps its normal lifetime handling. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-72482 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpib: fix double decrement of descriptor_busy in command_ioctl() commit d1857f8296dc ("gpib: fix use-after-free in IO ioctl handlers") introduced a descriptor_busy reference counter to pin struct gpib_descriptor across IO ioctl operations. In command_ioctl(), the error path inside the loop decrements descriptor_busy and breaks, but execution then falls through to the unconditional decrement after the loop, underflowing the counter to -1. This re-enables the use-after-free that the original fix was meant to prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on an actively-used descriptor and frees it. Remove the early decrement from the error path. The post-loop decrement already handles all exit paths, matching the correct pattern used in read_ioctl() and write_ioctl(). | ||||
| CVE-2026-72469 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix ep kref imbalance on ADDR_CHANGE rpcrdma_cm_event_handler() falls through to the disconnected: label on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED. The kref then underflows during connect teardown and rpcrdma_xprt_disconnect() operates on a freed ep. Reference counts across a normal connection lifecycle: rpcrdma_ep_create() kref_init ->1 rpcrdma_xprt_connect() ep_get ->2 (before post_recvs) RDMA_CM_EVENT_ESTABLISHED ep_get ->3 RDMA_CM_EVENT_DISCONNECTED ep_put ->2 rpcrdma_xprt_drain() ep_put ->1 rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy) The connect-time get in rpcrdma_xprt_connect(), taken just before rpcrdma_post_recvs() "while there are outstanding Receives," is balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has no get to consume, so its put drops the count to 1 and the drain put then frees the ep while rpcrdma_xprt_disconnect() still holds a pointer to it. Fix by dispatching on the prior re_connect_status via xchg(): for prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with no put; for prev == 1 call rpcrdma_force_disconnect() and return. The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED event -- reliably delivered when rdma_disconnect() is called on a still-connected cm_id -- to balance the ESTABLISHED get; rpcrdma_xprt_drain() continues to balance only that connect-time get. Any other prior value means teardown is already in flight. | ||||
| CVE-2026-72467 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Check frwr_wp_create() during connect frwr_wp_create() creates the singleton Memory Region used to encode padding for Write chunks whose payload length is not XDR-aligned. Its failure paths return a negative errno and leave ep->re_write_pad_mr set to NULL. rpcrdma_xprt_connect() currently ignores that return value. If frwr_wp_create() fails after the rest of the connection setup succeeds, xprt_rdma_connect_worker() treats the connection attempt as successful and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned receive page length reaches rpcrdma_encode_write_list(), passes the NULL write-pad MR to encode_rdma_segment(), and dereferences it. This is locally triggerable on an NFS/RDMA client after a connect or reconnect hits a local MR allocation, DMA-map, MR-map, or post-send failure; a remote peer alone cannot force the local MR setup failure. Check the return value and fail the connect as -ENOTCONN, matching the adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the normal reconnect path retry. | ||||