Export limit exceeded: 370439 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370439 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64490 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: Validate control metadata from the device virtio-snd control handling trusts the device-provided control type and value count returned by the device. That metadata is then used directly to index g_v2a_type_map[] in virtsnd_kctl_info(), and to size loops and memcpy() operations in virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size virtio_snd_ctl_value and snd_ctl_elem_value arrays. A buggy or malicious device can therefore trigger out-of-bounds access by advertising an invalid control type or an oversized value count. Validate control type and count once in virtsnd_kctl_parse_cfg(), before querying enumerated items or exposing the control to ALSA. | ||||
| CVE-2026-64489 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ymfpci: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_ymfpci_create_spdif_controls() does not check the return value before dereferencing kctl->id.device, which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails. | ||||
| CVE-2026-64488 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aoa: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. In layout.c, the function does not check the return value before dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return early if any fails. | ||||
| CVE-2026-64487 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every iteration it advances buf and subtracts the block size while looping on "while (len)". len is urb->actual_length. That value is supplied by the device and is not guaranteed to be a multiple of 16. When a final short block leaves len between 1 and 15, the loop runs once more, reads up to buf[15], and then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows to a huge value. The loop then keeps iterating and walking buf far past the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus block id happens to be hit. Iterate only while a full message block is available. This stops the unsigned underflow and silently drops any trailing partial block, which carries no complete control value anyway. The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1 and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor urb->actual_length before dispatching. | ||||
| CVE-2026-64486 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: cmipci: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_cmipci_spdif_controls() does not check the return value before dereferencing kctl->id.device, which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails. | ||||
| CVE-2026-64485 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: compress: Fix task creation error unwind snd_compr_task_new() allocates the driver task before validating the returned DMA buffers and reserving file descriptors. When either of those later steps fails, the core frees its task wrapper and DMA-buffer references without calling the driver's task_free() callback. Any driver resources allocated by task_create() are therefore leaked. The dual-fd allocation path also jumps to cleanup without storing the negative get_unused_fd_flags() result in retval. Since retval still contains the successful task_create() return value, TASK_CREATE can incorrectly report success although the task was discarded. Preserve the fd allocation errors and call task_free() when failure occurs after a successful task_create() callback. | ||||
| CVE-2026-64484 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: es1938: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_es1938_mixer() does not check the return value before dereferencing the pointer, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. | ||||
| CVE-2026-64483 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. | ||||
| CVE-2026-64482 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_gf1_pcm_volume_control() does not check the return value before dereferencing kctl->id.index, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. | ||||
| CVE-2026-64481 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs35l41: Fix firmware load work teardown cs35l41_hda creates ALSA controls whose private data points at the cs35l41_hda object. The firmware load control can also queue fw_load_work. Those controls are not removed on component unbind, and device remove only cancels fw_load_work through cs35l41_remove_dsp(). That helper is skipped when halo_initialized is false. With firmware_autostart disabled, a firmware load can be requested before the DSP has been initialized. If the component or device is removed before the queued work runs, the worker can run after teardown and dereference driver state that is no longer valid. Track the created controls and remove them on unbind so no new control callback can reach the driver data or queue more work. Then cancel fw_load_work to drain any request that was already queued. Also cancel the work unconditionally during device remove before runtime PM teardown. | ||||
| CVE-2026-64480 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. The ice1712 driver calls snd_ctl_new1() without checking the return value before dereferencing the pointer in multiple places (ice1712.c, ice1724.c, aureon.c), which can lead to NULL pointer dereferences. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails. | ||||
| CVE-2026-64479 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup() snd_seq_event_dup() copies an incoming event into a pool cell and, in the UMP-enabled build, clears the trailing cell->ump.raw.extra word that the memcpy() did not cover. The guard deciding whether to clear it compares the copied size against sizeof(cell->event): memcpy(&cell->ump, event, size); if (size < sizeof(cell->event)) cell->ump.raw.extra = 0; For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) == sizeof(cell->event), so the condition is false and the extra word keeps stale data. The cell pool is allocated with kvmalloc() (not zeroed) and cells are reused via a free list, so that word holds uninitialised heap or leftover event data. When such a cell is delivered to a UMP client (client->midi_version > 0) that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it unconverted -- snd_seq_read() reads it out as the larger struct snd_seq_ump_event and copies the stale word to user space, a 4-byte kernel heap infoleak to an unprivileged /dev/snd/seq client. Compare against sizeof(cell->ump) instead, so the trailing word is zeroed for every event shorter than the UMP cell. | ||||
| CVE-2026-64478 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect. | ||||
| CVE-2026-64477 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled The architecture updates the cpu_mask in a domain's header to track which online CPUs are associated with the domain. When this mask becomes empty the architecture initiates offline of the domain that includes calling on resctrl fs to offline the domain. If it is a monitoring domain in which LLC occupancy is tracked resctrl fs forces the limbo handler to clear all busy RMID state associated with the domain. The limbo handler always reads the current event value associated with a busy RMID irrespective of it being checked as part of regular "is it still busy" check or whether it will be forced released anyway. When reading an RMID on a system with SNC enabled the "logical RMID" is converted to the "physical RMID" and this conversion requires the NUMA node ID of the resctrl monitoring domain that is in turn determined by querying the NUMA node ID of any CPU belonging to the monitoring domain. When the monitoring domain is going offline its cpu_mask is empty causing the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as argument resulting in an out-of-bounds access. Refactor the limbo handler to skip reading the RMID when the RMID will just be forced to no longer be dirty in the domain anyway. Add a safety check to the architecture's RMID reader to protect against this scenario. | ||||
| CVE-2026-64476 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Latch disable_idle_d3 per device When disable_idle_d3 was introduced in vfio-pci, it directly manipulated the device power state with pci_set_power_state(). There were no refcounts to maintain or balanced operations, we could unconditionally bring the device to D0 and conditionally move it to D3hot. Therefore the module parameter was made writable. Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect of the module parameter was nullified. The parameter value could still be changed through sysfs, but the vfio-pci driver latched the values into vfio-pci-core globals at module init. Loading the vfio-pci module, or unloading and reloading, with non-default or different values could change the globals relative to existing devices bound to vfio-pci variant drivers. Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM"), which marks the point where power states became refcounted. PM get and put operations need to be balanced, but the same module operations noted above can change the global variables relative to those devices already bound to vfio-pci variant drivers. This introduces a window where PM operations can now become unbalanced. To resolve this with a narrow footprint for stable backports, the disable_idle_d3 flag is latched into the vfio_pci_core_device at the time of initialization, such that the device always operates with a consistent value. NB. vfio_pci_dev_set_try_reset() now unconditionally raises the runtime PM usage count around bus reset to account for disable_idle_d3 becoming a per-device rather than global flag. When this flag is set, the additional get/put pair is harmless and allows continued use of the shared vfio_pci_dev_set_pm_runtime_get() helper. | ||||
| CVE-2026-64475 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Release the VGA arbiter client on register_device() failure The re-order in the Fixes commit below displaced vfio_pci_vga_init() as the last failure point of what is now vfio_pci_core_register_device() without introducing an unwind for the VGA arbiter registration. In current kernels this is mostly benign because vfio_pci_set_decode() only uses pci_dev state, but the original failure path could leave a callback with a freed vdev cookie. The stale registration also becomes unsafe again once the callback follows drvdata to the vfio device. Add the required VGA unwind callout. | ||||
| CVE-2026-64474 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time, looping to skip optional states the device does not support until *next_fsm is supported. A blocked transition is encoded as VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL. The skip loop does not account for the ERROR sentinel. state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is ERROR, so once *next_fsm becomes ERROR the loop condition stays true and *next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a precopy-capable device, causing the loop to spin forever while holding the driver state mutex. This can result in a soft lockup, and a panic with softlockup_panic set. Terminate the skip loop on the ERROR sentinel so a blocked transition falls through to the existing return and reports -EINVAL. | ||||
| CVE-2026-64473 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio: Remove device debugfs before releasing devres VFIO device debugfs files created with debugfs_create_devm_seqfile() store a devres allocated debugfs_devm_entry as inode private data. vfio_unregister_group_dev() currently calls vfio_device_del() before vfio_device_debugfs_exit(), but device_del() releases devres. This can leave debugfs entries visible with stale inode private data while unregister waits for userspace references to drain. Remove the per-device debugfs tree before vfio_device_del(). The debugfs view is diagnostic only, so losing it at the start of unregister is preferable to preserving entries whose backing storage may already have been released. Complete the teardown by clearing the per-device debugfs root after removal. This matches the global debugfs root cleanup and prevents future users from mistaking a removed dentry for a live debugfs tree during the remainder of unregister. | ||||
| CVE-2026-64472 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix racy bitfields and tighten struct layout Bitfield operations are not atomic, they use a read-modify-write pattern, therefore we should be careful not to pack bitfields that can be concurrently updated into the same storage unit. This split takes a binary approach: flags that are only modified pre/post open/close remain bitfields, flags modified from user action, including actions that reach across to another device (ex. reset) use dedicated storage units. Note mlx5_vhca_page_tracker.status is relocated to fill the alignment hole this split exposes. Bitfield justifications: migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe Dedicated storage units: mdev_detach: written in the VF attach/detach event notifier mlx5fv_vf_event() at runtime log_active: written in mlx5vf_start_page_tracker()/ mlx5vf_stop_page_tracker() during runtime dirty tracking deferred_reset: written in mlx5vf_state_mutex_unlock()/ mlx5vf_pci_aer_reset_done() during runtime reset handling is_err: set by tracker error handling and dirty-log polling at runtime object_changed: set by tracker event handling and cleared by dirty-log polling at runtime | ||||
| CVE-2026-64471 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on registration failure Make sure to release the sibling interfaces in case controller registration fails to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. | ||||