Export limit exceeded: 360856 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360856 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52972 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Cap AEAD AD length to 0x80000000 In order to prevent arithmetic overflows when checking the TX buffer size, cap the associated data length to 0x80000000. | ||||
| CVE-2026-52985 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: zero initialize struct iphdr in dummy sk_buff Syzbot reports a KMSAN uninit-value originating from nsim_dev_trap_skb_build, with the allocation also being performed in the same function. Fix this by calling skb_put_zero instead of skb_put to guarantee zero initialization of the whole IP header. | ||||
| CVE-2026-53003 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pppoe: drop PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the current PPPoE driver assumes an uncompressed (2-byte) protocol field. However, the generic PPP layer function ppp_input() is not aware of the negotiation result, and still accepts PFC frames. If a peer with a broken implementation or an attacker sends a frame with a compressed (1-byte) protocol field, the subsequent PPP payload is shifted by one byte. This causes the network header to be 4-byte misaligned, which may trigger unaligned access exceptions on some architectures. To reduce the attack surface, drop PPPoE PFC frames. Introduce ppp_skb_is_compressed_proto() helper function to be used in both ppp_generic.c and pppoe.c to avoid open-coding. | ||||
| CVE-2026-53069 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via xdp_master_redirect(). Full decoded trace: https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73 bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU counter that bonding only allocates in bond_open() when the mode is round-robin. If the bond device was never brought up, rr_tx_counter stays NULL. The XDP redirect path can still reach that code on a bond that was never opened: bpf_master_redirect_enabled_key is a global static key, so as soon as any bond device has native XDP attached, the XDP_TX -> xdp_master_redirect() interception is enabled for every slave system-wide. The path xdp_master_redirect() -> bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() -> bond_rr_gen_slave_id() then runs against a bond that has no rr_tx_counter and crashes. Fix this in the generic xdp_master_redirect() by refusing to call into the master's ->ndo_xdp_get_xmit_slave() when the master device is not up. IFF_UP is only set after ->ndo_open() has successfully returned, so this reliably excludes masters whose XDP state has not been fully initialized. Drop the frame with XDP_ABORTED so the exception is visible via trace_xdp_exception() rather than silently falling through. This is not specific to bonding: any current or future master that defers XDP state allocation to ->ndo_open() is protected. | ||||
| CVE-2026-53082 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: hamradio: 6pack: fix uninit-value in sixpack_receive_buf sixpack_receive_buf() does not properly skip bytes with TTY error flags. The while loop iterates through the flags buffer but never advances the data pointer (cp), and passes the original count (including error bytes) to sixpack_decode(). This causes sixpack_decode() to process bytes that should have been skipped due to TTY errors. The TTY layer does not guarantee that cp[i] holds a meaningful value when fp[i] is set, so passing those positions to sixpack_decode() results in KMSAN reporting an uninit-value read. Fix this by processing bytes one at a time, advancing cp on each iteration, and only passing valid (non-error) bytes to sixpack_decode(). This matches the pattern used by slip_receive_buf() and mkiss_receive_buf() for the same purpose. | ||||
| CVE-2026-53766 | 2026-06-24 | 6.1 Medium | ||
| Chrome DevTools for agents (chrome-devtools-mcp) lets your coding agent control and inspect a live Chrome browser. From 0.24.0 until 1.1.0, McpContext.validatePath() enforces workspace roots by checking whether path.resolve(filePath) textually falls under one of the configured root paths. path.resolve() does not canonicalize symbolic links. As a result, a symlink inside a configured workspace root can point to a file outside that root, pass validation, and then be followed by downstream file read/write operations. This bypass applies even when the MCP client correctly declares the roots capability with a non-empty list. It is separate from the documented legacy behavior where missing roots capability allows all paths. The practical impact is a workspace-boundary bypass. In the write direction, filePath-writing tools can overwrite out-of-root files through an in-root symlink. In the read direction, upload_file can read through the symlink and send the file to the currently selected web page. This vulnerability is fixed in 1.1.0. | ||||
| CVE-2026-55570 | 2026-06-24 | 9 Critical | ||
| SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, it does not escape the untrusted fields (name, version, author, description) when they are serialized into the data-obj HTML attribute of each marketplace card. Because the attribute is single-quoted and the value is produced with JSON.stringify() (which does not escape ', <, or >), a package whose name contains a single quote breaks out of the attribute and injects arbitrary HTML. In the desktop client the main BrowserWindow runs with nodeIntegration: true, contextIsolation: false, so the injected markup escalates from DOM XSS to arbitrary OS command execution. This is the same root cause and same impact as the original advisory, reached through a sibling sink the patch did not cover. This vulnerability is fixed in 3.7.0. | ||||
| CVE-2026-47110 | 2026-06-24 | 6.5 Medium | ||
| Tiptap for PHP before version 2.1.1 contains an input validation vulnerability that allows authenticated attackers to cause a denial of service by submitting Tiptap JSON with the attrs.href field set to an array instead of a string, causing an unhandled TypeError in the Link::isAllowedUri() function when passed to preg_match(). Attackers can persist malformed JSON records that permanently crash the server-side HTML rendering pipeline for all subsequent viewers of that record until the database entry is manually repaired. | ||||
| CVE-2026-54759 | 2026-06-24 | N/A | ||
| SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, Lute's HTML sanitizer does not remove <iframe> elements. Combined with the SiYuan Electron client's permissive security configuration, an attacker can include a malicious <iframe> in a Bazaar package README that executes arbitrary commands on the victim's machine when the package details are viewed. No package installation is required. This vulnerability is fixed in 3.7.0. | ||||
| CVE-2026-50551 | 2026-06-24 | 9.9 Critical | ||
| SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, SiYuan contains a stored cross-site scripting (XSS) vulnerability in the Attribute View (database) asset cell renderer that escalates to remote code execution (RCE) in the Electron desktop client. This vulnerability is fixed in 3.7.0. | ||||
| CVE-2026-54158 | 2026-06-24 | 9.9 Critical | ||
| SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, the attribute-view (database) cell renderer genAVValueHTML interpolates cell content raw in four of its branches: text, url, phone, and mAsset. A cell value like </textarea><img src=x onerror="..."> or "><img src=x onerror="..."> breaks out of its surrounding tag and runs arbitrary JavaScript in the renderer when the victim opens the block-attribute panel. On Electron desktop the renderer runs with nodeIntegration:true, so the XSS chains to host RCE via require('child_process'). AV files live under the workspace and ride normal sync, so an attacker with write access to any synced workspace plants the payload once and it fires on every device that opens a panel containing that row.he kernel doesn't escape on the way in either, so the malicious cell persists byte-for-byte. There's no equivalent of the html.EscapeAttrVal call that protects block IAL attributes at kernel/model/blockial.go:261. This vulnerability is fixed in 3.7.0. | ||||
| CVE-2026-54070 | 2026-06-24 | 7.1 High | ||
| SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, renderPackageREADME in kernel/bazaar/readme.go renders a Bazaar package README from Markdown to HTML with the lute engine and SetSanitize(true). The lute sanitizer is an event-handler blocklist: allowAttr rejects only attribute names present in a fixed eventAttrs map copied from the w3schools legacy handler list. That map omits modern event handlers. onpointerover, onpointerdown, onauxclick, onbeforetoggle, onfocusin, onanimationstart, and ontransitionend are not in the list, so the sanitizer passes them through verbatim on any tag. The frontend assigns the rendered HTML to mdElement.innerHTML in app/src/config/bazaar.ts with no client-side DOMPurify on this path, into a normal element in the main document (no iframe, no sandbox). The kernel sends no Content-Security-Policy, X-Frame-Options, or X-Content-Type-Options header on any response, so an inline handler runs when its event fires. The README is rendered when an Administrator opens a package in Settings → Marketplace, after the one-time marketplace trust consent. Install is not required. Result: a third-party Bazaar package author runs JavaScript in the Administrator's authenticated SiYuan origin when the Administrator views and interacts with the package listing, and gains full control of the workspace. This vulnerability is fixed in 3.7.0. | ||||
| CVE-2026-54069 | 2026-06-24 | N/A | ||
| SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, SiYuan Note's kernel HTTP server unconditionally trusts all chrome-extension:// origins, granting RoleAdministrator access to every installed browser extension without any authentication. Combined with the default empty AccessAuthCode on desktop installs, any Chrome/Chromium extension -- including a compromised legitimate extension via supply chain attack -- can make fully authenticated admin API calls to the SiYuan kernel at 127.0.0.1:6806, enabling data exfiltration, stored XSS injection, and configuration tampering. This vulnerability is fixed in 3.7.0. | ||||
| CVE-2026-52956 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in __ceph_x_decrypt() In __ceph_x_decrypt(), a part of the buffer p is interpreted as a ceph_x_encrypt_header, and the magic field of this struct is accessed. This happens without any guarantee that the buffer is large enough to hold this struct. The function parameter ciphertext_len represents the length of the ciphertext to decrypt and is guaranteed to be at most the remaining size of the allocated buffer p. However, this value is not necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold the ciphertext at its end with a ciphertext_len of 8 or less, can trigger an out-of-bounds memory access when accessing hdr->magic. This patch fixes the issue by adding a check to ensure that the decrypted plaintext in the buffer is large enough to represent at least the ceph_x_encrypt_header. | ||||
| CVE-2026-52976 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) | ||||
| CVE-2026-53033 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair) sock_hold(sk_pair) // UaF More practically, this fix guarantees that the iterator program is consistently provided with a unix socket that remains stable during iterator execution. [1]: BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490 Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231 Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2026-53042 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so `cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls `fwctl_register()` and then `device_add()`, fwctl_class is not yet registered because fwctl_init() hasn't run, causing `class_to_subsys()` to return NULL and skip knode_class initialization. On device removal, `class_to_subsys()` returns non-NULL, and `device_del()` calls `klist_del()` on the uninitialized knode, triggering a NULL pointer dereference. | ||||
| CVE-2026-53092 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix linked reg delta tracking when src_reg == dst_reg Consider the case of rX += rX where src_reg and dst_reg are pointers to the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first modifies the dst_reg in-place, and later in the delta tracking, the subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the post-{add,sub} value instead of the original source. This is problematic since it sets an incorrect delta, which sync_linked_regs() then propagates to linked registers, thus creating a verifier-vs-runtime mismatch. Fix it by just skipping this corner case. | ||||
| CVE-2026-53101 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() -> mt7921_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership. | ||||
| CVE-2026-53102 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req() mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to be freed eventually by mt76_mcu_skb_send_msg(). However, currently if an intermediate function fails before sending, the allocated skb is leaked. Specifically, mt76_connac_mcu_sta_wed_update() and mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory leak in the error path. Fix this by explicitly freeing the skb in these error paths. Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on mt7996_mcu_sta_key_tlv error") made a similar change. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||