Export limit exceeded: 358698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (358698 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-47684 | 1 Sync-in | 1 Server | 2026-06-16 | 7.7 High |
| Sync-in Server is a secure, open-source platform for file storage, sharing, collaboration, and syncing. Prior to version 2.3.0, the private IP blocklist regex used in the URL download feature does not match IPv4-mapped IPv6 addresses (e.g. ::ffff:127.0.0.1), allowing SSRF protection to be bypassed on dual-stack systems. Version 2.3.0 fixes the issue. | ||||
| CVE-2026-46033 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject short ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null), exposed authencesn instances whose default authsize was invalid even though setauthsize() would have rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range 1..3 so that no tfm can inherit an unsupported default authsize. | ||||
| CVE-2026-5038 | 1 Expressjs | 1 Multer | 2026-06-16 | 5.3 Medium |
| Impact: multer versions 2.0.0-alpha.1 through 2.1.1 and 3.0.0-alpha.1 are vulnerable to a Denial of Service when using diskStorage. Aborted or malformed multipart uploads leave orphaned partial files on disk because the Readable.pipe() call does not propagate the stream destroy signal to the underlying fs.WriteStream. An attacker can exhaust disk space by triggering many aborted uploads, with no application bug required. Patches: Users should upgrade to multer 2.2.0 (2.x line) or 3.0.0-alpha.2 (3.x prerelease). Both versions track in-flight write streams and clean them up on the abort path. Workarounds: None. | ||||
| CVE-2026-46034 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Fix NULL pointer dereference in interrupt trigger path Add validation to ensure MSI is configured before accessing cdx_irqs array in vfio_cdx_set_msi_trigger(). Without this check, userspace can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD. The vfio_cdx_msi_enable() function allocates the cdx_irqs array and sets config_msi to 1 only when called through the EVENTFD path. The trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been done, but there was no enforcement of this call ordering. This matches the protection used in the PCI VFIO driver where vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop. | ||||
| CVE-2026-46035 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, alloc_frozen_pages_nolock() called from NMI context can re-enter rmqueue() and acquire the zone lock that the interrupted context is already holding, corrupting the freelists. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 rmqueue.isra.0+0x2a9/0xa70 get_page_from_freelist+0xeb/0x450 alloc_frozen_pages_nolock_noprof+0x111/0x1e0 allocate_slab+0x42a/0x500 ___slab_alloc+0xa7/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel. | ||||
| CVE-2025-68264 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: refresh inline data size before write operations The cached ei->i_inline_size can become stale between the initial size check and when ext4_update_inline_data()/ext4_create_inline_data() use it. Although ext4_get_max_inline_size() reads the correct value at the time of the check, concurrent xattr operations can modify i_inline_size before ext4_write_lock_xattr() is acquired. This causes ext4_update_inline_data() and ext4_create_inline_data() to work with stale capacity values, leading to a BUG_ON() crash in ext4_write_inline_data(): kernel BUG at fs/ext4/inline.c:1331! BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); The race window: 1. ext4_get_max_inline_size() reads i_inline_size = 60 (correct) 2. Size check passes for 50-byte write 3. [Another thread adds xattr, i_inline_size changes to 40] 4. ext4_write_lock_xattr() acquires lock 5. ext4_update_inline_data() uses stale i_inline_size = 60 6. Attempts to write 50 bytes but only 40 bytes actually available 7. BUG_ON() triggers Fix this by recalculating i_inline_size via ext4_find_inline_data_nolock() immediately after acquiring xattr_sem. This ensures ext4_update_inline_data() and ext4_create_inline_data() work with current values that are protected from concurrent modifications. This is similar to commit a54c4613dac1 ("ext4: fix race writing to an inline_data file while its xattrs are changing") which fixed i_inline_off staleness. This patch addresses the related i_inline_size staleness issue. | ||||
| CVE-2025-68337 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: avoid bug_on in jbd2_journal_get_create_access() when file system corrupted There's issue when file system corrupted: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:1289! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 5 UID: 0 PID: 2031 Comm: mkdir Not tainted 6.18.0-rc1-next RIP: 0010:jbd2_journal_get_create_access+0x3b6/0x4d0 RSP: 0018:ffff888117aafa30 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88811a86b000 RCX: ffffffff89a63534 RDX: 1ffff110200ec602 RSI: 0000000000000004 RDI: ffff888100763010 RBP: ffff888100763000 R08: 0000000000000001 R09: ffff888100763028 R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88812c432000 R14: ffff88812c608000 R15: ffff888120bfc000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f91d6970c99 CR3: 00000001159c4000 CR4: 00000000000006f0 Call Trace: <TASK> __ext4_journal_get_create_access+0x42/0x170 ext4_getblk+0x319/0x6f0 ext4_bread+0x11/0x100 ext4_append+0x1e6/0x4a0 ext4_init_new_dir+0x145/0x1d0 ext4_mkdir+0x326/0x920 vfs_mkdir+0x45c/0x740 do_mkdirat+0x234/0x2f0 __x64_sys_mkdir+0xd6/0x120 do_syscall_64+0x5f/0xfa0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The above issue occurs with us in errors=continue mode when accompanied by storage failures. There have been many inconsistencies in the file system data. In the case of file system data inconsistency, for example, if the block bitmap of a referenced block is not set, it can lead to the situation where a block being committed is allocated and used again. As a result, the following condition will not be satisfied then trigger BUG_ON. Of course, it is entirely possible to construct a problematic image that can trigger this BUG_ON through specific operations. In fact, I have constructed such an image and easily reproduced this issue. Therefore, J_ASSERT() holds true only under ideal conditions, but it may not necessarily be satisfied in exceptional scenarios. Using J_ASSERT() directly in abnormal situations would cause the system to crash, which is clearly not what we want. So here we directly trigger a JBD abort instead of immediately invoking BUG_ON. | ||||
| CVE-2025-68820 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: xattr: fix null pointer deref in ext4_raw_inode() If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED), iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all() lacks error checking, this will lead to a null pointer dereference in ext4_raw_inode(), called right after ext4_get_inode_loc(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-6893 | 1 Redhat | 6 Dracut, Enterprise Linux, Hardened Images and 3 more | 2026-06-16 | 7.5 High |
| A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP (Dynamic Host Configuration Protocol) options, such as a malicious hostname, to a system using dracut's legacy DHCP path. These options are improperly handled and written into temporary shell scripts without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs, potentially compromising the system's boot and network behavior. | ||||
| CVE-2026-6517 | 1 Mattermost | 2 Mattermost, Mattermost Desktop | 2026-06-16 | 6.3 Medium |
| Mattermost Desktop App versions <=6.1 5.5.13.0 fail to restrict the allow list of domains to which NTLM credentials were forwarded to in the Mattermost Desktop App which allows any user on a server without the image proxy enabled to intercept other users credentials via embedding an image that routes to an external web server. Mattermost Advisory ID: MMSA-2026-00651 | ||||
| CVE-2025-68295 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix memory leak in cifs_construct_tcon() When having a multiuser mount with domain= specified and using cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname, so it needs to be freed before leaving cifs_construct_tcon(). This fixes the following memory leak reported by kmemleak: mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,... su - testuser cifscreds add -d ZELDA -u testuser ... ls /mnt/1 ... umount /mnt echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8881203c3f08 (size 8): comm "ls", pid 5060, jiffies 4307222943 hex dump (first 8 bytes): 5a 45 4c 44 41 00 cc cc ZELDA... backtrace (crc d109a8cf): __kmalloc_node_track_caller_noprof+0x572/0x710 kstrdup+0x3a/0x70 cifs_sb_tlink+0x1209/0x1770 [cifs] cifs_get_fattr+0xe1/0xf50 [cifs] cifs_get_inode_info+0xb5/0x240 [cifs] cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs] cifs_getattr+0x28e/0x450 [cifs] vfs_getattr_nosec+0x126/0x180 vfs_statx+0xf6/0x220 do_statx+0xab/0x110 __x64_sys_statx+0xd5/0x130 do_syscall_64+0xbb/0x380 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2025-68795 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: Avoid overflowing userspace buffer on stats query The ethtool -S command operates across three ioctl calls: ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and ETHTOOL_GSTATS for the values. If the number of stats changes between these calls (e.g., due to device reconfiguration), userspace's buffer allocation will be incorrect, potentially leading to buffer overflow. Drivers are generally expected to maintain stable stat counts, but some drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making this scenario possible. Some drivers try to handle this internally: - bnad_get_ethtool_stats() returns early in case stats.n_stats is not equal to the driver's stats count. - micrel/ksz884x also makes sure not to write anything beyond stats.n_stats and overflow the buffer. However, both use stats.n_stats which is already assigned with the value returned from get_sset_count(), hence won't solve the issue described here. Change ethtool_get_strings(), ethtool_get_stats(), ethtool_get_phy_stats() to not return anything in case of a mismatch between userspace's size and get_sset_size(), to prevent buffer overflow. The returned n_stats value will be equal to zero, to reflect that nothing has been returned. This could result in one of two cases when using upstream ethtool, depending on when the size change is detected: 1. When detected in ethtool_get_strings(): # ethtool -S eth2 no stats available 2. When detected in get stats, all stats will be reported as zero. Both cases are presumably transient, and a subsequent ethtool call should succeed. Other than the overflow avoidance, these two cases are very evident (no output/cleared stats), which is arguably better than presenting incorrect/shifted stats. I also considered returning an error instead of a "silent" response, but that seems more destructive towards userspace apps. Notes: - This patch does not claim to fix the inherent race, it only makes sure that we do not overflow the userspace buffer, and makes for a more predictable behavior. - RTNL lock is held during each ioctl, the race window exists between the separate ioctl calls when the lock is released. - Userspace ethtool always fills stats.n_stats, but it is likely that these stats ioctls are implemented in other userspace applications which might not fill it. The added code checks that it's not zero, to prevent any regressions. | ||||
| CVE-2025-68764 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags When a filesystem is being automounted, it needs to preserve the user-set superblock mount options, such as the "ro" flag. | ||||
| CVE-2025-68800 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_mr: Fix use-after-free when updating multicast route stats Cited commit added a dedicated mutex (instead of RTNL) to protect the multicast route list, so that it will not change while the driver periodically traverses it in order to update the kernel about multicast route stats that were queried from the device. One instance of list entry deletion (during route replace) was missed and it can result in a use-after-free [1]. Fix by acquiring the mutex before deleting the entry from the list and releasing it afterwards. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum] Read of size 8 at addr ffff8881523c2fa8 by task kworker/2:5/22043 CPU: 2 UID: 0 PID: 22043 Comm: kworker/2:5 Not tainted 6.18.0-rc1-custom-g1a3d6d7cd014 #1 PREEMPT(full) Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017 Workqueue: mlxsw_core mlxsw_sp_mr_stats_update [mlxsw_spectrum] Call Trace: <TASK> dump_stack_lvl+0xba/0x110 print_report+0x174/0x4f5 kasan_report+0xdf/0x110 mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 mlxsw_sp_mr_route_add+0xd8/0x4770 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 Freed by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x43/0x70 kfree+0x14e/0x700 mlxsw_sp_mr_route_add+0x2dea/0x4770 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:444 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-5079 | 1 Expressjs | 1 Multer | 2026-06-16 | 7.5 High |
| Impact: multer versions 1.0.0 through 2.1.1 and 3.0.0-alpha.1 are vulnerable to a Denial of Service via deeply nested field names in multipart form data. The append-field dependency parses bracket notation in field names with no limit on nesting depth, allowing an attacker to force allocation of deeply nested object structures that consume CPU and memory. A single HTTP request with a crafted multipart body is sufficient to exploit this. Patches: Users should upgrade to multer 2.2.0 (2.x line) or 3.0.0-alpha.2 (3.x prerelease) and configure the new limits.fieldNestingDepth option to the minimum depth their application requires. Workarounds: Set limits.fields to a reasonable value to reduce the number of fields an attacker can send per request. This does not fully mitigate the issue but limits the impact. | ||||
| CVE-2026-12057 | 1 Foxit | 1 Ai | 2026-06-16 | 8.6 High |
| When the application executes the JavaScript script embedded in the PDF within the sandbox, it fails to intercept some dangerous interfaces, which allows remote scripts to be loaded, resulting in arbitrary code execution. | ||||
| CVE-2026-11317 | 1 Rockwellautomation | 2 Compactlogix, Controllogix | 2026-06-16 | N/A |
| A denial of service security issue exists in the affected product. The security issue stems from a fault occurring when a crafted CIP message is sent. Devices with less memory are more likely to be affected. This can result in a major nonrecoverable fault (MNRF). A program download is required to recover. | ||||
| CVE-2026-10636 | 1 Zephyrproject | 1 Zephyr | 2026-06-16 | 3.7 Low |
| In Zephyr's IPv4 IGMP implementation, igmp_send() in subsys/net/ip/igmp.c read the network interface back out of the packet via net_pkt_iface(pkt) after the packet had been handed to net_send_data(). On the successful-send path the packet's last reference may already have been released by the L2 driver or by the network stack's TX handling (synchronously in the default NET_TC_TX_COUNT=0 immediate-transmit configuration), returning the net_pkt slab block to its free list. The subsequent net_pkt_iface(pkt) dereferences the freed packet, a use-after-free read; with CONFIG_NET_STATISTICS_PER_INTERFACE the resulting dangling interface pointer is further dereferenced for a statistics-counter write. The IGMP send path is reachable without authentication from inbound IPv4 IGMP membership queries addressed to 224.0.0.1 (net_ipv4_igmp_input - send_igmp_report/send_igmp_v3_report - igmp_send), as well as from local multicast join/leave/rejoin operations. Realistic impact is undefined behavior and potential denial of service (sporadic crash or stats corruption); a controllable write requires the asynchronous TX path plus a concurrent slab reuse. The flaw was introduced with IGMPv2 support and affects releases from v2.6.0 through v4.4.0. The fix caches the interface pointer before sending. Note the analogous IPv6 MLD path (mld_send in subsys/net/ip/ipv6_mld.c) retains the same unfixed pattern. | ||||
| CVE-2026-10638 | 1 Zephyrproject | 1 Zephyr | 2026-06-16 | 5.9 Medium |
| subsys/net/ip/icmpv6.c reads the network interface from a net_pkt after that packet has been handed to net_try_send_data(). In icmpv6_handle_echo_request() and net_icmpv6_send_error(), the post-send statistics update calls net_pkt_iface(reply)/net_pkt_iface(pkt) on the just-sent packet. The send path (net_try_send_data - net_if_tx) unreferences and may free the packet back to its memory slab before returning — synchronously in the RX thread when no TX queue is configured (CONFIG_NET_TC_TX_COUNT == 0), and asynchronously the driver/L2 may already have freed it otherwise. net_pkt_iface() therefore dereferences a freed (and possibly reused) net_pkt; with CONFIG_NET_STATISTICS_PER_INTERFACE the stale iface pointer is further dereferenced and written through (iface-stats.icmp.sent++), turning the use-after-free read into a write through an attacker-influenceable pointer. The core stack already documents this hazard in net_core.c ("do not use pkt after that call") and caches iface before sending; the ICMPv6 callers did not. An unauthenticated remote attacker triggers the flaw simply by sending an ICMPv6 Echo Request (ping) or an IPv6 packet that elicits an ICMPv6 error (unknown next header, fragment reassembly timeout, destination unreachable), leading to denial of service via crash and potential memory corruption. Affected: Zephyr networking with CONFIG_NET_NATIVE_IPV6, roughly v4.2.0 through v4.4.0. The fix caches the interface pointer before sending and uses it for all statistics updates; the sibling commit 86e21665d46 fixes the identical bug in ICMPv4. | ||||
| CVE-2026-10639 | 1 Zephyrproject | 1 Zephyr | 2026-06-16 | 4.8 Medium |
| In Zephyr's native IPv4 stack, icmpv4_handle_echo_request() in subsys/net/ip/icmpv4.c builds an echo-reply packet (reply), hands it to net_try_send_data(), and then, on success, calls net_stats_update_icmp_sent(net_pkt_iface(reply)). net_try_send_data() transfers ownership of reply to the TX path (net_if_try_queue_tx - net_if_tx - L2/driver send, or the asynchronous net_if_tx_thread), which can unref it to refcount 0 and return the struct net_pkt to its slab (net_pkt_unref - k_mem_slab_free) before the stats line runs. net_core.c documents this exact contract ('the pkt might contain garbage already ... do not use pkt after that call'). The post-send net_pkt_iface(reply) therefore reads reply-iface out of a freed (and possibly already reallocated) net_pkt, a use-after-free read; with CONFIG_NET_STATISTICS_PER_INTERFACE the stats macro additionally increments a counter through that value, i.e. a dereference/write through a stale or recycled-slot pointer. The path is reached unauthenticated by any remote host that pings the device (net_icmpv4_input - net_icmp_call_ipv4_handlers - icmpv4_handle_echo_request) and is gated on CONFIG_NET_STATISTICS_ICMP. Impact is a probabilistic read of recycled packet memory plus a possible wild-pointer write under a timing race, leading most likely to corrupted interface statistics or a remotely triggerable crash (DoS). The defect was introduced in 2019 (v1.14) and is present through v4.4.0. The companion change in net_icmpv4_send_error() is not a use-after-free because it reads net_pkt_iface(orig), the caller-owned received packet, which stays alive across the send. The fix caches the interface pointer from the live received packet before sending and uses it for the post-send stats updates. | ||||