Export limit exceeded: 390712 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390712 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390712 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89761 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix out-of-bounds write when null terminating a label vec aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE is passed. If the components are all distinct no duplicates are dropped, dups is 0 and the terminator goes to vec[n], so the caller has to provide room for n + 1 entries. aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len, gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it allocates exactly len pointers. The terminator therefore lands one entry past the end of the local array when len is LOCAL_VEC_ENTRIES, and one entry past the end of the allocation when len is larger. len comes from the number of "//&" separated components in the label name and label_count_strn_entries() does not bound it. An unprivileged task reaches the parse by writing to /proc/self/attr/apparmor/current or through lsm_set_self_attr(2), both of which go through do_setattr(), and the name is parsed before the change_profile permission is checked. The query_label() path behind the securityfs .access file, which is mode 0666, performs no permission check at all. Every component has to resolve to a loaded profile, so a system with policy loaded is required. The other two VEC_FLAG_TERMINATE users work on a label vec that aa_label_alloc() has already sized with "+ 1 for null terminator entry on vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of the local array and into kzalloc(). | ||||
| CVE-2026-89760 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm, swap: don't free a hibernation slot that is in the swap cache A slot with a folio in the swap cache is freed when the folio leaves the cache, not when its count drops. swap_put_entries_cluster() follows that rule. swap_free_hibernation_slot() does not, it calls __swap_cluster_free_entries() whether or not a folio sits on the slot. Cluster readahead can put one there. It walks a raw page_cluster sized window of offsets around the faulting entry, and a hibernation slot passes __swap_cache_add_check() because it is not a folio and its count is not zero. Freeing the slot then clears the entry under that folio. The folio is now unreachable from the swap table, and the offset goes back to the allocator. The folio is still on the LRU though, so reclaim can pick it up later. It then takes the old offset out of folio->swap and overwrites the table entry there, which by then may belong to someone else. This bug can trigger silent memory corruption, process crashes, or data instability across completely unrelated userspace applications - typically occurring when uswsusp is preparing the hibernation image. I found this while working on giving hibernation slots their own marker in the swap table, which I had discussed with Kairui. (https://lore.kernel.org/linux-mm/abp7aDgYLrxF3Me8@KASONG-MC4/) As far as I know there are no reports, so there is no Reported-by/Closes to add. Check for a cached folio before freeing. The slot is then left in the ordinary state where only the swap cache holds it, and it is freed when the folio leaves the cache, either through the reclaim below or through normal reclaim later. | ||||
| CVE-2026-89758 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: skip non-present PMDs when queueing folios Patch series "mm: handle device-private PMDs in walk callbacks", v3. Since commit 368076f52ebe ("mm/huge_memory: add device-private THP support to PMD operations") a PMD may hold a device-private swap entry whenever an HMM-based GPU driver migrates an anonymous THP folio to device memory via migrate_vma_pages(). pmd_trans_huge_lock() succeeds for such PMDs (pmd_is_huge() returns true for any non-present, non-none huge PMD), so several MM walk callbacks that used to assume present THP or migration entry are now reachable with a device-private PMD. The results range from a VM_BUG_ON() firing on debug kernels, to an oops on a bogus vmemmap dereference, to silently isolating an unrelated live folio from LRU in the aliasing case. This patch (of 3): queue_folios_pmd() is called under pmd_trans_huge_lock(), whose pmd_is_huge() check returns true for any non-present, non-none PMD softleaf. Passing such a PMD to pmd_folio() treats the softleaf encoding as a hardware PFN and can return a bogus folio pointer. Mirror queue_folios_pte_range(): handle non-present entries before looking up a folio. Keep migration entries counted as failures, but skip other non-present PMDs such as device-private entries. Potential trigger: an HMM-based GPU driver migrates an anonymous THP folio to device memory via migrate_vma_pages(), leaving a device-private PMD. Userspace then calls mbind(), migrate_pages() or set_mempolicy_home_node() on that range. | ||||
| CVE-2026-89757 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix and remove redundant unevictable folio handling sort_folio() has a shortcut for moving folios that are no longer evictable but are still sitting on a generation list. However, this shortcut is buggy. It does not follow the PG_lru usage convention, and it has a more serious issue. Unevictable folios are not threaded on lists[LRU_UNEVICTABLE], so that folio->lru can be reused to hold folio->mlock_count (see the comment in lruvec_init()). Hence lruvec_add_folio() skips the list_add() for them, and every other place that turns a folio unevictable initialises mlock_count explicitly: lru_add() sets it to 0, __mlock_folio() and __mlock_new_folio() set it to !!folio_test_mlocked(folio). sort_folio() sets nothing, and the lru_gen_del_folio() right above it may have already poisoned folio->lru via list_del(), so mlock_count ends up aliasing LIST_POISON2, which reads as 0x122, i.e. 290. The result is user visible. On munlock, __munlock_folio() decrements that bogus count, finds it still non-zero and bails out before clearing PG_mlocked, so the folio remains unevictable and the Mlocked accounting stays inflated until the folio is freed. The shortcut also touches the LRU flags in the wrong order. It calls lru_gen_del_folio() while PG_lru is still set, so a concurrent folio_test_clear_lru() (e.g. compaction, folio_isolate_lru()) can succeed on a folio that has already been taken off the generation list, which may lead to unexpected behavior. So fix it by isolating them as common folios and letting the generic shrink path cull them. This matches the classical LRU behavior, and there should be no visible effect on the generic eviction or isolation behavior. There is no performance concern either, such a folio goes through this once, and then it is off the generation lists for good. | ||||
| CVE-2026-89756 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch() migrate_pages_batch() unmaps each folio before moving it, and every unmap runs the mmu_notifier invalidate callbacks. On KVM hosts try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() -> tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps the CPU busy for a long time. The loop already calls cond_resched(), but on PREEMPTION kernels that is a no-op, and involuntary preemption is not a Tasks-RCU quiescent state. A long batch therefore never reports a quiescent state, and the migrating task (e.g. kcompactd) becomes a Tasks-RCU holdout, stalling the Tasks-RCU grace period for minutes, which is common at Meta fleet: INFO: rcu_tasks detected stalls on tasks: 0000000055349ecc: .. nvcsw: 1157401/1157401 holdout: 1 idle_cpu: -1/56 task:kcompactd0 state:R running task Call Trace: tdp_mmu_zap_leafs tdp_mmu_next_root gfn_to_pfn_cache_invalidate_start kvm_mmu_notifier_invalidate_range_start __mmu_notifier_invalidate_range_start try_to_migrate_one try_to_migrate migrate_pages_batch migrate_pages compact_zone compact_node kcompactd kthread Use cond_resched_tasks_rcu_qs() so a quiescent state is reported even when cond_resched() does nothing. This has also been discussed at [1] | ||||
| CVE-2026-89755 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: clear stale mapping after freeing swapcache __migrate_device_pages() reads the folio mapping before calling folio_free_swap(). When folio_free_swap() succeeds, the folio is removed from the swap cache, but the saved mapping still points to swap_space. Passing the stale mapping to folio_migrate_mapping() makes it use the mapped-folio path for a folio that is no longer in swapcache. It can then operate on swap_space.i_pages with invalid reference accounting, eventually triggering a folio reference count BUG. After a successful split, nr still contains the number of pages in the original large folio, although each resulting page is now a separate order-0 folio. Reset nr to 1 so each split folio is processed separately, including its own swapcache removal and mapping lookup. Refresh the saved mapping after folio_free_swap() so the current folio state is used during migration. | ||||
| CVE-2026-89754 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix stale walk->action escaping walk_pmd_range() If ->pmd_entry() sets walk->action = ACTION_AGAIN, the pmd_none() check is retried. The PMD entry may be cleared at the point of retry. In this case, if walk->ops->install_pte is not specified, the code continues to the next PMD entry in the range without resetting walk->action to ACTION_SUBTREE. This leaves walk->action erroneously set to ACTION_AGAIN, which is incorrect. This was incorrect but not problematic up until commit 3b89863c3fa4 ("mm/pagewalk: fix race between concurrent split and refault") which updated walk_pud_range() to check for walk->action == ACTION_AGAIN upon walk_pmd_range()'s return, causing the PUD walk to be retried. In this case this results in duplicate walk callbacks being invoked, which is erroneous and will break any caller that is not idempotent with respect to this (and waste time for those which are). The result is an out-of-bounds write, triggered by a local fuzzer: [ 2.272695] ================================================================== [ 2.273471] BUG: KASAN: slab-out-of-bounds in __mincore_unmapped_range+0x14f/0x190 [ 2.274302] Write of size 1 at addr ffff888008d9b000 by task poc/106 [ 2.274966] [ 2.275154] CPU: 0 UID: 1000 PID: 106 Comm: poc Not tainted 7.2.0-rc6-00429-ga7c7074b58d2 #55 PREEMPT(lazy) [ 2.275159] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 2.275164] Call Trace: [ 2.275170] <TASK> [ 2.275172] dump_stack_lvl+0x53/0x70 [ 2.275200] print_report+0xd0/0x630 [ 2.275210] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 2.275219] ? irqentry_exit+0xd2/0x670 [ 2.275224] ? irqentry_exit+0xd2/0x670 [ 2.275226] ? __virt_addr_valid+0xef/0x1a0 [ 2.275239] ? __mincore_unmapped_range+0x14f/0x190 [ 2.275242] kasan_report+0xce/0x100 [ 2.275245] ? __mincore_unmapped_range+0x14f/0x190 [ 2.275248] __mincore_unmapped_range+0x14f/0x190 [ 2.275252] mincore_unmapped_range+0x45/0x70 [ 2.275254] walk_pgd_range+0xafc/0xfc0 [ 2.275261] ? __pfx_walk_pgd_range+0x10/0x10 [ 2.275264] ? __update_load_avg_se+0x3d1/0x670 [ 2.275275] __walk_page_range+0xc0/0x310 [ 2.275278] ? __pfx_find_vma+0x10/0x10 [ 2.275281] ? finish_task_switch.isra.0+0x16d/0x4f0 [ 2.275290] walk_page_range_mm_unsafe+0x26f/0x3a0 [ 2.275293] ? __pfx_mtree_load+0x10/0x10 [ 2.275298] ? __pfx_walk_page_range_mm_unsafe+0x10/0x10 [ 2.275302] ? __free_frozen_pages+0x54d/0x7e0 [ 2.275308] __do_sys_mincore+0x132/0x380 [ 2.275311] do_syscall_64+0xf9/0x540 [ 2.275316] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2.275322] RIP: 0033:0x422ccd [ 2.275326] Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 2.275329] RSP: 002b:00007fffffffec18 EFLAGS: 00000287 ORIG_RAX: 000000000000001b [ 2.275337] RAX: ffffffffffffffda RBX: 0000000000000066 RCX: 0000000000422ccd [ 2.275339] RDX: 00000000004d0940 RSI: 0000000001000000 RDI: 00007ffff4000000 [ 2.275340] RBP: 00000000004d0940 R08: 0000000000000100 R09: 0000000000000100 [ 2.275342] R10: 0000000000000100 R11: 0000000000000287 R12: 20c49ba5e353f7cf [ 2.275343] R13: 00000000004990d3 R14: 0000000000000000 R15: 0000000000000001 [ 2.275346] </TASK> [ 2.275347] [ 2.296904] The buggy address belongs to the object at ffff888008d9b000 [ 2.296904] which belongs to the cache sigqueue of size 80 [ 2.298151] The buggy address is located 0 bytes inside of [ 2.298151] allocated 80-byte region [ffff888008d9b000, ffff888008d9b050) [ 2.299408] [ 2.299601] The buggy address belongs to the physical page: [ 2.300191] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8d9b ---truncated--- | ||||
| CVE-2026-89753 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec() I am seeing some rcu_tasks stalls in the Meta fleet during reclaim. INFO: rcu_tasks detected stalls on tasks: 0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8 task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552 Call Trace: shrink_lruvec mem_cgroup_iter shrink_node do_try_to_free_pages try_to_free_pages __alloc_frozen_pages_noprof alloc_pages_noprof pte_alloc_one __pte_alloc handle_mm_fault Nothing promises direct reclaim returns in bounded time, and the scan loop in shrink_lruvec() only calls cond_resched(), which is a no-op on PREEMPTION kernels. Involuntary preemption is not a Tasks-RCU quiescent state, so the reclaiming task never reports one and becomes a holdout. Upgrade it to cond_resched_tasks_rcu_qs(), which reports a quiescent state even when cond_resched() does nothing. PS: This has been discussed in [1] | ||||
| CVE-2026-89752 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: memcg: stop reclaim when a limit update is superseded kernfs serializes file operations only per open file, so separate open files can update the same memory.high or memory.max file concurrently. Both handlers store the new limit before synchronous reclaim, but continue to use the writer's local target in the reclaim loop. If another writer raises or removes the limit, the first writer can continue reclaiming toward a stale target. For memory.max, this can leave the writer looping indefinitely once reclaim retries are exhausted. The OOM path sees sufficient margin under the current limit and returns true without killing, while the writer still compares usage against its stale target and records another OOM event. Check the current limit at the start of each reclaim iteration and stop if it no longer matches the writer's target. Reproducer: Populate a cgroup with anonymous memory and disable swapping. Lower memory.max from one open file, then restore it to "max" through another open file after the new limit becomes visible. Without the patch, the first writer remains blocked and repeatedly increments the OOM event counter. With the patch, it returns normally. This was not motivated by a reported production workload. We found it through automated randomized testing for our cgroup observability work and reduced it to the reproducer above. | ||||
| CVE-2026-89751 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix off-by-one in port I/O handling handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use: u64 mask = GENMASK(BITS_PER_BYTE * size, 0); GENMASK(h, l) includes bit h. For size=1 (INB), this produces GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8 bits). The mask is one bit too wide for all I/O sizes. Fix the mask calculation. | ||||
| CVE-2026-89750 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Clear copied tracing state before fork duplication dup_task_struct() copies user_event_mm from the parent into the child, without grabbing a reference to it. user_event_mm_dup() should replace it, but it leaves that copied pointer unmodified if user_event_mm_alloc() fails. When the child exits, user_event_mm_remove() decrements a reference the child never owned, which ultimately frees user_event_mm, while the parent still as a stale pointer to it. This creates a UAF, which KASAN reports as: BUG: KASAN: slab-use-after-free in current_user_event_mm+0x51/0x1d0 Write of size 4 at addr ffff888005010d30 by task init/44 Call Trace: <TASK> kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 current_user_event_mm+0x51/0x1d0 user_events_ioctl+0x82e/0x15c0 __x64_sys_ioctl+0x139/0x1c0 do_syscall_64+0xce/0x450 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 44: __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x180/0x3a0 user_event_mm_alloc+0x3c/0x1f0 current_user_event_mm+0x88/0x1d0 Freed by task 42: __kasan_slab_free+0x43/0x70 kfree+0x13a/0x390 process_one_work+0x696/0xf90 worker_thread+0x420/0xba0 The fix simply clears the copied pointer before any possible failure. In case of failure, the child then has nothing to free. | ||||
| CVE-2026-89748 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix retry exhaustion in simple ring buffer reader swap simple_ring_buffer_swap_reader_page() starts with retry set to 8 and post-decrements it only after a failed link replacement. On the final attempt, a successful replacement leaves retry at zero, while a failed replacement leaves it at -1. The current !retry test reverses both outcomes. It returns an error after a successful final replacement, leaving the link update complete but the reader bookkeeping unfinished. After a failed final replacement, it falls through and updates the head and reader pointers as though the replacement succeeded, which can corrupt the ring. Treat only a negative counter as exhaustion and return the documented -EBUSY error. | ||||
| CVE-2026-89747 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free in trace_pipe read on sub-buffer order change Writing to buffer_subbuf_size_kb calls ring_buffer_subbuf_order_set(), which frees every sub-buffer of the ring buffer, including the reader page, and replaces them with newly allocated ones. Readers of trace_pipe hold pointers into those pages. ring_buffer_peek() looks up an event under cpu_buffer->reader_lock but returns the event pointer after dropping the lock, and peek_next_entry() then calls ring_buffer_event_length() and ring_buffer_event_data() on it. If the sub-buffer order is changed in that window, the reader dereferences freed memory: BUG: KASAN: use-after-free in ring_buffer_peek+0x3e0/0x430 Read of size 1 at addr ffff88802a4cf010 by task syz-executor989/6002 Freed by: free_buffer_page kernel/trace/ring_buffer.c:398 [inline] ring_buffer_subbuf_order_set+0x1325/0x18e0 kernel/trace/ring_buffer.c:7444 buffer_subbuf_size_write+0x182/0x280 kernel/trace/trace.c:8221 Take trace_access_lock(RING_BUFFER_ALL_CPUS) around the order change. This is the lock trace_pipe readers already hold across their entire peek-and-print loop, so the swap can no longer race with a reader that is dereferencing a peeked event. | ||||
| CVE-2026-89746 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free with same-name named triggers When two hist triggers on different events are registered with the same name=, the second one reuses the first as named_data. Both are added to tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(), because save_hist_vars() is called before event_trigger_register() while the named reuse is only detected later, in hist_register_trigger(). In the named-data branch hist_register_trigger() then frees the second histogram's hist_data via destroy_hist_data(), but never removes its tr->hist_vars list entry, leaving a dangling pointer and leaking the trace_array reference it holds. A later hist trigger that references a variable makes find_var_file() walk tr->hist_vars and dereference the freed hist_data. The bug is reproducible from userspace by writing three hist triggers to tracefs: cd /sys/kernel/tracing echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger The third write panics the kernel: BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290 Read of size 8 at addr ffff888001f8a0e0 by task sh/1 CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N Call Trace: find_var_file.part.0 find_event_var parse_atom parse_expr __create_val_field event_hist_trigger_parse trigger_process_regex event_trigger_write vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Allocated by task 1: event_hist_trigger_parse Freed by task 1: hist_register_trigger+0x618/0xa30 event_hist_trigger_parse The buggy address belongs to freed 2048-byte region Oops: general protection fault ... RIP: find_var_file.part.0 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix by removing the hist_data from tr->hist_vars and releasing the trace_array reference in the named-data branch of hist_register_trigger() before freeing the hist_data. | ||||
| CVE-2026-89744 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: device property: fix infinite loop in fwnode_for_each_child_node() When iterate over children of a fwnode that has a secondary fwnode, fwnode_get_next_child_node() can enter an infinite loop if the secondary fwnode has more than one child. Parent Child (Primary fwnode) FWa: {FWa1, FWa2, FWa3} (Secondary fwnode) FWb: {FWb1, FWb2} In this case: ┌─> fwnode_get_next_child_node(FWa, FWa1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2 │ │ ... │ │ fwnode_get_next_child_node(FWa, FWa3) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL │ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1 │ │ fwnode_get_next_child_node(FWa, FWb1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1 └────┘ This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}. The root cause is that when the current child (FWb1) belongs to the secondary fwnode, calling get_next_child_node() on the parimary fwnode incorrectly returns the first child (FWa1) again instead of NULL. Fix this by dynamically checking the parent fwnode of the current child before calling get_next_child_node(). This approach follows the pattern established in commit b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()"). | ||||
| CVE-2026-89743 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: nsm: bound the device-reported response length nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported by the NSM device into msg->resp.len without bounding it to the response buffer. A malicious or buggy backend can report a length larger than the response buffer; parse_resp_raw() then copies that many bytes out of the fixed buffer to user space, disclosing adjacent kernel heap (an out-of-bounds read). The request path already floors its length in fill_req_raw(); the response path lacks the symmetric check. Clamp the stored length to the size of the response buffer. Well-behaved devices report no more than the posted buffer size, so conforming traffic is unaffected. | ||||
| CVE-2026-89742 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in dma_req_free() dma_req_free() acquires buf_mutex through req->map, drops the mapping reference with kref_put(), and then dereferences req->map again to unlock the mutex. If kref_put() drops the last reference, mport_release_mapping() frees the mapping, and the subsequent mutex_unlock() dereferences a freed object. This is a use-after-free. Fix this by caching map and md before kref_put(), clearing req->map while holding buf_mutex, and using the cached md for mutex unlocking. The bug is reachable from userspace via the RapidIO mport character device interface. | ||||
| CVE-2026-89738 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via mod_timer(). Both recover the same udc through container_of and dereference it on every iteration. Neither teardown path cancels this cycle. udc is devm-allocated, so it is freed after at91udc_remove() returns, and is likewise freed when probe fails and devres runs. A timer callback or work item that is pending or running at either point dereferences the freed udc. Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and from the usb_add_gadget_udc() failure path in probe; the remaining probe error paths fail before the timer is armed. timer_shutdown_sync() waits for a running callback and clears timer->function, which makes the work handler's mod_timer() a permanent no-op; cancel_work_sync() then drains any pending or running work whose re-arm attempt now does nothing. The timer must be shut down first, since cancelling the work alone would let the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and work_struct are never initialized. This does not require a fault; a normal driver unbind can interleave with an already queued work item. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89737 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: thunderbolt: Disable work before freeing tbt on remove tbt_altmode_remove() drops the plug and cable references without draining tbt->work. The work function dereferences those references, and can also requeue itself in its error path. The VDM callbacks can queue the same work item. Disable and drain tbt->work before dropping the references. This waits for an existing invocation and prevents subsequent schedule_work() calls from queueing it during teardown. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-89736 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix use-after-free on sound card disconnect g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound card teardown and immediately frees the underlying struct snd_uac_chip context. However, snd_card_free_when_closed() returns asynchronously while ALSA control elements (kctls) remain open in userspace. When userspace control applications access or close these open file descriptors, kctl callbacks attempt to dereference kctl->private_data pointing to &uac->c_prm or &uac->p_prm within the freed uac structure, resulting in a use-after-free (UAF) memory corruption. Fix this issue by deferring the destruction of struct snd_uac_chip until all references to the ALSA sound card are released. Register a custom card->private_free callback (u_audio_card_free) during g_audio_setup() that frees uac and its associated playback/capture request and ring buffers only when the sound card reference count drops to zero. | ||||