Export limit exceeded: 375309 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (375309 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68181 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_bus_dev_release(): mei_cl_flush_queues() is running without lock. bus->file_list access after mei_dev_bus_put(bus) can become a use-after-free if this was the last reference to bus. Protect queues cleanup and WARN traversal by device lock there to avoid the concurrent access problems. Move WARN traversal before mei_dev_bus_put(bus). This file uses bus variable name for mei_device, adjust code of mei_cl_bus_dev_release() to use bus variable too. | ||||
| CVE-2026-68265 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOC When prefetch region is DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC for a BO VMA, the code used it as an index into region_to_mem_type[], causing an out-of-bounds access since the value is -1. Resolve the preferred location for BO VMAs directly: local VRAM on dGFX (using the BO's tile placement) or system memory on iGPU. Discovered using AI-assisted static analysis confirmed by Intel Product Security. v2: -Fix null dereference (cherry picked from commit d9a4906ac03be9f6ed3f3b45c56c866b867fd75b) | ||||
| CVE-2026-68299 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa). Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the function cannot locate the inner header it would need to parse. Also convert the remaining BUG_ON()s in this function to return 0 defensively. | ||||
| CVE-2026-18478 | 2026-08-10 | N/A | ||
| Magnolia CMS is vulnerable to Stored XSS in import functionality. An attacker with editor privileges can inject arbitrary HTML and JS into the name of uploaded image, which will be rendered/executed when opening uploaded image. The issue was fixed in version 6.3.10 | ||||
| CVE-2026-59112 | 2026-08-10 | N/A | ||
| Improper verification of cryptographic signature and Improper Check for Unusual or Exceptional Conditions vulnerability in Estonian Information System Authority (RIA) libdigidocpp, DigiDoc4, DigiDoc on Android, and DigiDoc on iOS. This issue affects libdigidocpp: from 4.1.0 before 4.2.1; DigiDoc4: from 4.7.0 before 4.8.2; DigiDoc on Android: from 2.7.0 before 2.7.2; DigiDoc on iOS: from 2.8.0 before 2.8.1. | ||||
| CVE-2026-6368 | 2026-08-10 | N/A | ||
| Calling wordexp with WRDE_APPEND in the GNU C Library version 2.0 to version 2.43 can cause the interface to return invalid memory in the we_wordv member, which on subsequent calls to wordfree may abort the process. | ||||
| CVE-2026-16232 | 1 Checkpoint | 2 Multi-domain Management, Quantum Security Management | 2026-08-10 | N/A |
| An authentication bypass vulnerability in the Check Point SmartConsole login process allows an unauthenticated remote attacker to obtain an application login token and use it to authenticate with full administrative privileges. Successful exploitation allows the attacker to modify security policies and security configurations. Remote exploitation requires internet access to the Management Server IP address and a configuration that does not restrict Trusted Clients. Check Point is aware that this vulnerability is being exploited and has affected a very small number of customers. | ||||
| CVE-2026-68185 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Move jump_label_init() before parse_early_param() When enabling both CONFIG_MEM_ALLOC_PROFILING=y and CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will cause the kernel failed to boot. After analysis, this is because jump_label_init() must be called before parse_early_param(), the early param handlers may modify static keys by static_branch_enable/disable(). Fix this by moving jump_label_init() to before parse_early_param(). The solution is similar to other architectures. | ||||
| CVE-2026-68186 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: set have_execfd only once the interpreter is opened load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O' (or 'C') flag. This happens well before it opens the interpreter. If that open fails the flag stays set on the bprm. binfmt_misc is at the head of the format list so an interpreter open failure that returns -ENOEXEC lets the search fall through to a later format. This means it runs the matched binary directly having never staged an interpreter. So bprm->executable is NULL while have_execfd falsely claims a descriptor is present. Consequently, begin_new_exec() dereferences the missing executable: would_dump(bprm, bprm->executable); and NULL derefs. Had it not, the hand-off later in the same function would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL file with -ENOMEM. Both sites are past the point of no return so the exec cannot be unwound either way. This can be reached by unprivileged users as binfmt_misc can be mounted in user namespaces. So a user can register an 'O' entry whose interpreter lives on a FUSE mount, have the FUSE server fail the open with -ENOEXEC and execute a native ELF file that matches the entry. have_execfd only means anything alongside the executable it describes which is not set until the interpreter has been opened and staged. So lets raise it there, next to execfd_creds, which is already set at that point. An open failure now leaves it clear, so the fallback format derives credentials from the binary and emits no AT_EXECFD, as it would for any native exec. The argv rewrite load_misc_binary() performs before the open is still not undone. This means the binary sees the interpreter path in argv[0] and its own path in argv[1] but that predates this change and only became observable once the exec stopped faulting. | ||||
| CVE-2026-68194 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus. mt7921_mac_tx_free() cleans the DMA tx queues with mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the mmio queue ops implement that callback; on USB and SDIO it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX worker: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Call Trace: mt7921_mac_tx_free+0x64/0x310 [mt7921_common] mt7921_rx_check+0x5f/0xf0 [mt7921_common] mt76u_rx_worker+0x1b9/0x620 [mt76_usb] Drop the event on non-mmio buses via mt76_is_mmio(), as in commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for non-mmio devices"). | ||||
| CVE-2026-68199 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB access from firmware ADDBA window size aggr_recv_addba_req_evt() logs a debug message when the firmware-supplied win_sz is outside [AGGR_WIN_SZ_MIN, AGGR_WIN_SZ_MAX] but does not return. The out-of-range win_sz is then used in TID_WINDOW_SZ() to compute a kzalloc size and stored in rxtid->hold_q_sz, leading to zero-size or overflowed allocations and subsequent out-of-bounds access. Clean up any previously active aggregation session for the TID first, then return early when win_sz is out of the valid range, instead of proceeding with a broken allocation size. | ||||
| CVE-2026-68205 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor() The v4l2 helper v4l2_async_register_subdev_sensor() calls v4l2_async_register_subdev(), which is a macro that expands to __v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module rather than the sensor driver module that originally set sd->owner. When v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then overwrites the sensor driver's owner with NULL. This causes the problem that the sensor module's reference count is never incremented during async registration, so the module can be removed while the subdevice is still in use by a notifier (e.g., a CSI-2 receiver bridge driver). Fix this by renaming v4l2_async_register_subdev_sensor() to __v4l2_async_register_subdev_sensor() with an added explicit module argument and introducing a wrapper macro: #define v4l2_async_register_subdev_sensor(sd) \ __v4l2_async_register_subdev_sensor(sd, THIS_MODULE) This ensures the sensor driver module is properly referenced even when the sensor driver does not init the owner field before calling v4l2_async_register_subdev_sensor() and prevents premature module removal. | ||||
| CVE-2026-68220 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe Both mxc_isi_crossbar_init() and mxc_isi_pipe_init() call v4l2_subdev_init_finalize() which allocates the subdev active state, but neither mxc_isi_crossbar_cleanup() nor mxc_isi_pipe_cleanup() calls v4l2_subdev_cleanup() to free it. This causes a memory leak on every rmmod, reported by kmemleak: unreferenced object 0xffff0000d06fc800 (size 192): comm "(udev-worker)", pid 254, jiffies 4294913455 backtrace (crc 36eeae58): kmemleak_alloc+0x34/0x40 __kvmalloc_node_noprof+0x5f8/0x7d8 __v4l2_subdev_state_alloc+0x1fc/0x30c __v4l2_subdev_init_finalize+0x178/0x368 Add the missing v4l2_subdev_cleanup() calls before media_entity_cleanup() in both crossbar and pipe cleanup paths. | ||||
| CVE-2026-68222 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: msi2500: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. msi2500_start_streaming() had five error paths that all hit this trap and were further tangled by ret-overwriting between calls: - -ENODEV when the USB device was already disconnected - -ERESTARTSYS when mutex_lock_interruptible() was interrupted - msi2500_set_usb_adc() failure: ret was silently overwritten by the next call (msi2500_isoc_init), so the error was lost entirely - msi2500_isoc_init() failure: cleanup_queued_bufs was called, but the function then fell through to msi2500_ctrl_msg() and again masked the original error by overwriting ret - msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all, leaving isoc URBs submitted with no way for the driver to consume them Consolidate the error paths into a small goto chain. Every failure now stops the function, drains the queued-buffer list, and returns the real error code. The ctrl_msg failure path also rolls back the preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before unlocking and draining. The cleanup helper takes a vb2_buffer_state argument so that the start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as expected by userspace on start_streaming failure) while stop_streaming keeps its existing VB2_BUF_STATE_ERROR semantics. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68232 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Fix MM reference leak in drm_gpusvm_range_evict If kvmalloc_array() fails in drm_gpusvm_range_evict(), the MM reference acquired earlier is not released, resulting in a reference leak. Fix this by dropping the MM reference on the kvmalloc_array() failure path. | ||||
| CVE-2026-68246 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx11: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit daa62107452d2451787c4248ca38fa2d1a0cbefd) | ||||
| CVE-2026-68250 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma5.2: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ae658afc7f47f6147371ec42cc6b1a793dfdb5af) | ||||
| CVE-2026-68251 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma6.0: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit c17a508a7d652da3728f8bbc481bfffe96d65a87) | ||||
| CVE-2026-68303 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hvs/v3d: Fix null dereference in unbind The hvs and v3d drivers use dev_get_drvdata(master) in their unbind functions. Since the vc4-drm gets removed before its dependent drivers (vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to get drvdata of its master and fails with a null dereference error. Use the data pointer passed to the unbind functions directly instead of dev_get_drvdata(master). This avoids using potentially freed memory. | ||||
| CVE-2026-68313 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix infinite loop in __tipc_nl_compat_dumpit cmd->dumpit callback can return a negative errno, causing an infinite loop due to the while(len) condition. As the loop never terminates, genl_mutex is never released, and other tasks waiting on it starve in D state. Check dumpit's return value, propagate it and jump to err_out on error. | ||||