Export limit exceeded: 375309 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (375309 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68161 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is destroyed. | ||||
| CVE-2026-68162 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: avoid auth_enable sysctl UAF during netns teardown proc_sctp_do_auth() updates the SCTP control socket after changing net.sctp.auth_enable. The handler gets the per-net SCTP state from ctl->data, so an already opened sysctl file can still target a network namespace while that namespace is being torn down. SCTP previously registered its per-net sysctls from sctp_defaults_init(), while the control socket is created later from sctp_ctrlsock_init(). This exposed a window during initialization where auth_enable was writable before net->sctp.ctl_sock existed, and a teardown window where auth_enable stayed writable after inet_ctl_sock_destroy() had released the control socket. Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after sctp_ctl_sock_init() succeeds, and unregister the sysctl table before destroying the control socket in sctp_ctrlsock_exit(). If sysctl registration fails after the control socket was created, destroy the control socket in the same init path. Make sctp_sysctl_net_unregister() tolerate a missing header and clear the saved pointer so init-error and exit paths can safely share the unregister helper. | ||||
| CVE-2026-68163 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_vma_mapped: fix device-private PMD handling Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") introduced the concept of device-private PMD entries, but did not correctly update the rmap walk code to account for them. As a result, when page_vma_mapped_walk() encounters device-private PMD entries, it takes no action other than to acquire the PMD lock and exit. However this is highly problematic for two reasons - firstly, device private entries possess a PFN so check_pmd() needs to be called to ensure an overlapping PFN range. Secondly, and more importantly, if PVMW_MIGRATION is set the caller assumes the returned entry is a migration entry, resulting in memory corruption when the caller tries to interpret the device private entry as such. In addition, commit 146287290023 ("mm/huge_memory: implement device-private THP splitting") allowed device private PMDs to be split like THP mappings, but again did not update this code path. As a result, we might race a PMD split prior to acquiring the PMD lock. This patch addresses all of these issues by invoking check_pmd(), ensuring PMVW_MIGRATION is not set and checks whether a split raced us we do for PMD THP and migration entries. Instead of checking for a subset of the cases after taking the pmd_lock(), put device-private along with pmd_trans_huge() and pmd_is_migration_entry(). Also remove thp_migration_supported() as it is already guarded by pmd_is_migration_entry(). [akpm@linux-foundation.org: fix Raspberry Pi 1 build, per David] | ||||
| CVE-2026-68183 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix memory leaks and list corruption bugs Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error path. Switch pmem allocation from devm_kzalloc() to kzalloc() with explicit kfree() in the free path to match its list-managed lifetime. Remove the erroneous list_del(&svc_data_mem) which corrupted the list head on failed lookups. | ||||
| CVE-2026-68184 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cdrom: fix stack out-of-bounds read in CDROMVOLCTRL mmc_ioctl_cdrom_volume() first reads the audio control mode page into a 32-byte stack buffer with cgc->buflen set to 24. If the device reports a block descriptor, the function increases cgc->buflen to include that descriptor and reads the page again. For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list by moving cgc->buffer forward by offset - 8 bytes. This drops the block descriptor from the outgoing payload and leaves a new 8-byte mode parameter header in front of the audio control page. However, cgc->buflen is left unchanged. With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8 but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low level packet path to write 32 bytes from that adjusted pointer, reading 8 bytes past the end of the 32-byte stack buffer. This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on drives that return a non-zero block descriptor length, which helps explain why it has gone unnoticed. The overread is also sent to the device as extra MODE SELECT payload, so it may not produce an obvious local failure. Reduce cgc->buflen by the same amount as the buffer pointer adjustment so the MODE SELECT transfer covers only the intended parameter list. | ||||
| CVE-2026-68192 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: make release_scratchbuffers idempotent brcmf_pcie_release_scratchbuffers() frees the shared.scratch and shared.ringupd DMA buffers with dma_free_coherent() but does not clear the pointers afterwards, unlike the sibling release_ringbuffers() which NULLs commonrings/flowrings/idxbuf on release. Both the bus_reset .reset callback (brcmf_pcie_reset) and brcmf_pcie_remove() call release_scratchbuffers. When reset teardown has run before removal, remove's own teardown would call dma_free_coherent() a second time on the already-freed DMA allocation. NULL the pointers after free, matching release_ringbuffers(), so a later release observes that the allocation has already been released. This patch makes repeated sequential release safe; the reset-work lifetime is handled separately by the following patch. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-68268 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Return error on non-migratable faults requiring devmem Non-migratable faults that require devmem incorrectly jump to the 'out' label, which squashes the error code intended to be returned to the upper layers. Fix this by returning -EACCES instead. (cherry picked from commit c4508edb2c723de93717272488ea65b165637eac) | ||||
| CVE-2026-68270 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: Avoid possible truncation with calculating visible size Calculating the visible size of the system framebuffer can result in truncation of the result. The calculation uses 32-bit arithmetics, which can overflow if the values for height and stride are large. Fix the issue by multiplying with mul_u32_u32(). | ||||
| CVE-2026-17017 | 2026-08-10 | 8.1 High | ||
| The CubeWP Framework WordPress plugin before 1.1.31 does not properly sanitize and escape a parameter before using it in a SQL statement through an AJAX action, and does not include a capability check on that action, allowing users with Subscriber-level access and above to perform SQL injection attacks. | ||||
| CVE-2026-13079 | 1 Watchguard | 2 Fireware Os, Mobile Vpn With Ssl Client | 2026-08-10 | N/A |
| A local privilege escalation vulnerability in the WatchGuard Mobile VPN with SSL client for Windows allows a local attacker to escalate their privileges to NT AUTHORITY\SYSTEM on the machine where the client is installed. This issue affects the Mobile VPN with SSL client for Windows up to and including 2026.2. | ||||
| CVE-2026-13701 | 2026-08-10 | 4.8 Medium | ||
| The Advanced Excerpt WordPress plugin before 4.5 does not sanitise and escape one of its settings before outputting it on the front end of the site, which could allow administrators (including those without the unfiltered_html capability, such as on multisite) to perform Stored Cross-Site Scripting attacks that execute in the context of any visitor viewing affected pages. | ||||
| CVE-2026-8247 | 1 Watchguard | 1 Fireware Os | 2026-08-10 | N/A |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS may allow an unauthenticated attacker on the same local network segment to execute arbitrary code. This vulnerability affects Fireware OS 11.0 up to and including 11.12.4_Update1, 12.0 up to and including 12.12 and 2025.1 up to and including 2026.2. | ||||
| CVE-2026-19053 | 2026-08-10 | 9.1 Critical | ||
| The ProSolution WP Client WordPress plugin before 2.0.6 does not sanitise and escape a parameter before using it in a SQL statement reachable by unauthenticated visitors, leading to a blind SQL injection. | ||||
| CVE-2026-17022 | 2 Salonbookingsystem, Wordpress | 2 Salon Booking System, Wordpress | 2026-08-10 | 7.5 High |
| The Salon Booking System WordPress plugin through 10.30.33 does not properly validate a booking's ownership token before loading it in its booking-wizard confirmation steps, allowing unauthenticated attackers to disclose other customers' booking records, including personal information, by supplying a sequential booking identifier. | ||||
| CVE-2026-13728 | 1 Watchguard | 1 Fireware Os | 2026-08-10 | N/A |
| In exception circumstances, WatchGuard Fireware OS on a FireCluster may use a hard-coded encryption key to encrypt saved credentials for Access Portal resources. This vulnerability does not affect devices that do not support the Access Portal feature or standalone Fireboxes not deployed in a FireCluster. | ||||
| CVE-2026-16535 | 2 Link Library Project, Wordpress | 2 Link Library, Wordpress | 2026-08-10 | 6.1 Medium |
| The Link Library WordPress plugin before 7.9.4 does not sanitise and escape a parameter before reflecting it back in a response, allowing unauthenticated attackers to perform Reflected Cross-Site Scripting attacks against users who can be tricked into performing an action. | ||||
| CVE-2026-13084 | 1 Watchguard | 1 Fireware Os | 2026-08-10 | N/A |
| A null pointer dereference vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to create a denial-of-service (DoS) condition by sending specially crafted IKEv2 messages. This vulnerability affects both the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer. This vulnerability affects Fireware OS 11.10.2 up to and including 11.12.4_Update1, 12.0 up to and including 12.12 and 2025.1 up to and including 2026.2 | ||||
| CVE-2026-68130 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer destroy_previous_session() until after NTLM authentication In ntlm_authenticate(), destroy_previous_session() is called using a user pointer resolved from the client-supplied NTLM blob username field before the NTLMv2 response is validated. An authenticated attacker can set the NTLM blob username to match a victim account and set PreviousSessionId to the victim's session ID; destroy_previous_session() destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob() subsequently rejects the request with -EPERM. Move destroy_previous_session() and the prev_id assignment to after ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user rather than the pre-authentication lookup result. This matches the ordering already used by krb5_authenticate(), where destroy_previous_session() is called only after ksmbd_krb5_authenticate() returns success. | ||||
| CVE-2026-68131 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rbd: Reset positive result codes to zero in object map update path In a reply message to an RBD request, a positive result code indicates a data payload, which is not allowed for writes. While rbd_osd_req_callback() already resets a positive result code for writes to zero, rbd_object_map_callback() does not. This allows a corrupted reply to an object map update to trigger the rbd_assert(*result < 0) in __rbd_obj_handle_request(). This happens, because rbd_object_map_callback() calls rbd_obj_handle_request() -> __rbd_obj_handle_request() and passes this positive result code. From __rbd_obj_handle_request(), rbd_obj_advance_write() is called, which leaves the positive result code unchanged and returns true. Therefore, the if(done && *result) branch is executed in __rbd_obj_handle_request() and the assertion triggers. This patch fixes the issue by adjusting the logic in the rbd_object_map_callback() path. A positive result code for an object map update is now reset to zero (similar to rbd_osd_req_callback()), and the message is subsequently handled the same way as if the result code was zero from the beginning. Additionally, a WARN_ON_ONCE() is added for this case. | ||||
| CVE-2026-68133 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP Call Trace during PTP release If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will result in the following PTP release call trace during driver unload: kernel BUG at lib/list_debug.c:52! ice_ptp_release+0x332/0x3c0 [ice] ice_deinit_features.part.0+0x10e/0x120 [ice] ice_remove+0x100/0x220 [ice] This was observed when passing PF1 through to a VM. ice_ptp_init() fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT. Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and returning without error, preventing the invalid state transition to ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from ICE_PTP_RESETTING after a failed rebuild. | ||||