Export limit exceeded: 380292 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (380292 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72265 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: nvidia: fix potential memory leak in nvidiafb_probe() In nvidiafb_probe(), the memory allocated for modelist in nvidia_set_fbinfo() is not freed in the subsequent error paths. Fix that by calling fb_destroy_modelist(). | ||||
| CVE-2026-72260 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Check runtime resume during probe The MT8192 AFE probe enables runtime PM temporarily while reinitializing the regmap cache from hardware, but it uses pm_runtime_get_sync() without checking the return value. If runtime resume fails, probe keeps going without the device necessarily being accessible, and pm_runtime_get_sync() may leave the PM usage count incremented. The regmap_reinit_cache() failure path also returns before dropping the temporary PM reference and before clearing pm_runtime_bypass_reg_ctl. Use pm_runtime_resume_and_get() so resume failures do not leak a usage count, and clear the temporary bypass flag after dropping the probe PM reference on all regmap_reinit_cache() outcomes. | ||||
| CVE-2026-72258 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8183: Release reserved memory on cleanup The MT8183 AFE probe can assign reserved memory with of_reserved_mem_device_init(), but the assignment is never released on driver removal or later probe failures. Register a devm cleanup action so the reserved memory assignment is released consistently, matching newer Mediatek AFE drivers. | ||||
| CVE-2026-72257 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm: fix NULL pointer dereference in graph_callback When q6apm_free_fragments() is called it frees rx_data.buf/tx_data.buf and sets them to NULL under graph->lock. A late DSP buffer-done response can race with this: graph_callback() passes the !graph->ar_graph guard (not yet NULL), acquires the lock, but then dereferences a now-NULL buf pointer to read buf[token].phys, crashing at virtual address 0x10. Add a NULL check for buf inside the mutex-protected section in both the write-done (DATA_CMD_RSP_WR_SH_MEM_EP_DATA_BUFFER_DONE_V2) and read-done (DATA_CMD_RSP_RD_SH_MEM_EP_DATA_BUFFER_V2) handlers and bail out cleanly if buffers have already been freed. This problem is only shown up recently while apr bus was updated to process the commands per service rather from single global queue. | ||||
| CVE-2026-72256 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_cluster: reject template conntracks in hash match xt_cluster_mt() treats any non-NULL nf_ct_get() result as a fully initialized conntrack and passes it to xt_cluster_hash(). This causes a state confusion bug when the raw table CT target attaches a template conntrack to skb->_nfct before normal conntrack processing. Templates carry IPS_TEMPLATE status but do not have a valid tuple for hashing yet, so xt_cluster_hash() can hit its WARN_ON() path on the zeroed l3num field. Reject template conntracks before hashing them. This matches existing netfilter handling for template objects and avoids hashing incomplete conntrack state. | ||||
| CVE-2026-72246 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-72245 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path After device_initialize(), the embedded struct device in struct host1x_device should be released through the device core with put_device(). In host1x_device_add(), if host1x_device_parse_dt() fails, the current error path frees the object directly with kfree(device). That bypasses the normal device lifetime handling and leaks the reference held on the embedded struct device. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fix this by using put_device() in the host1x_device_parse_dt() failure path. | ||||
| CVE-2026-72241 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: leds: uleds: Fix potential buffer overread The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated. | ||||
| CVE-2026-72240 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: sm501: Fix reference leak on failed device registration When platform_device_register() fails in sm501_register_device(), the embedded struct device in pdev has already been initialized by device_initialize(), but the failure path only reports the error and returns without dropping the device reference for the current platform device: sm501_register_device() -> platform_device_register(pdev) -> device_initialize(&pdev->dev) -> setup_pdev_dma_masks(pdev) -> platform_device_add(pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before returning the error. The issue was identified by a static analysis tool I developed and confirmed by manual review. | ||||
| CVE-2026-72238 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/boot: Validate console=uart8250 baud rate to fix early boot hang When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init(). Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang. | ||||
| CVE-2026-72236 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init() ev variable is userspace controlled via event->attr.config and used as an array index after bounds checking, but without speculation barriers. Add the missing array_index_nospec() call to prevent speculative execution. | ||||
| CVE-2026-72230 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: free unfragmentable packet The caller of batadv_frag_send_packet() assume that the skb provided to the function are always consumed. But the pre-check for an empty payload or the zero fragment size returned an error without any further actions. A failed pre-check must use the same error handling code as the rest of the function. | ||||
| CVE-2026-72229 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: clean untagged VLAN on netdev registration failure When an mesh interface is registered, it creates an untagged struct batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in this process, another receiver of this notification can veto the registration. The netdev registration will be aborted because of this veto. The register_netdevice() call will try to clean up the net_device using unregister_netdevice_queue() - which only uses the .priv_destructor to free private resources. In this situation, .dellink will not be called. The cleanup of the untagged batadv_meshif_vlan must thefore be done in the destructor to avoid a leak of this object. | ||||
| CVE-2026-72228 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: fix primary_if leak on failed linearization If the skb has a frag_list, it must be linearized before it can be split using skb_split(). But when this step failed, it must not only free the skb but also take care of the reference to the already found primary_if. | ||||
| CVE-2026-72224 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Free arenas on btt_init() error paths The arenas allocated by discover_arenas() or create_arenas() are not freed on some error paths in btt_init(). This leaks memory when BTT initialization fails. Call free_arenas() from the affected error paths to release the allocations. [ as: commit message and log edits ] | ||||
| CVE-2026-72223 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Free arena sub-allocations on discover_arenas() error path Memory allocated by btt_freelist_init(), btt_rtt_init(), and btt_maplocks_init() is not freed on some discover_arenas() error paths. This leaks memory when arena discovery fails. Add the missing kfree() calls to release the allocations before returning an error. [ as: commit message and log edits ] | ||||
| CVE-2026-72219 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file leak when nlm_do_fopen() fails A client can repeatedly drive nlm_do_fopen() failures by presenting file handles that the underlying export rejects. After kzalloc_obj() succeeds in nlm_lookup_file(), the freshly allocated nlm_file is not yet inserted into nlm_files[]. The nlm_do_fopen() failure path jumps to out_unlock, which releases nlm_file_mutex and returns without freeing the allocation, so each failure leaks one nlm_file. Route the failure through out_free so kfree() runs before the function returns. | ||||
| CVE-2026-72216 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: Fix leak when custom dump_segments addition fails Free allocated minidump_region 'name' in qcom_add_minidump_segments() when failing before adding the region to 'dump_segments'. Otherwise, the 'name' is not tracked and is never freed by qcom_minidump_cleanup(). Return error when adding to 'dump_segments' fails. | ||||
| CVE-2026-72215 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf() In 64-bit configurations calling any firmware entry points from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment. Consequently the stack pointer is no longer a 32-bit value and when the 32-bit firmware code called uses 32-bit ALU operations to manipulate the stack pointer, the calculated result is incorrect (in fact in the 64-bit MIPS ISA almost all 32-bit ALU operations will produce an unpredictable result when executed on 64-bit data) and control goes astray. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap, or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started, and the kernel will hang at: pid_max: default: 32768 minimum: 301 or somewhat later, but always before: cblist_init_generic: Setting adjustable number of callback queues. has been printed. It seems that only the prom_printf() entry point is affected. Of all the other entry points wired only rex_slot_address() and rex_gettcinfo() are called from a kernel thread other than the initial one, specifically kernel_init(), and they are leaf functions that do no business with the stack, having worked with no issue ever since 64-bit support was added for the platform back in 2002. To address this issue then, arrange for the stack to be switched in the o32 wrapper as required for prom_printf() only, by supplying call_o32() with a pointer to a chunk of initdata space, which is placed in the CKSEG0 32-bit compatibility segment, observing that prom_printf() is only called from console output handler and therefore with the console lock held, implying no need for this code to be reentrant. Other firmware entry points may be called with interrupts enabled and no lock held, and may therefore require that call_o32() be reentrant. They trigger no issue at this point and "if it ain't broke, don't fix it," so just leave them alone. | ||||
| CVE-2026-72214 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak In cpcap_battery_detect_battery_type(), the reference to an nvmem device obtained via nvmem_device_find() is not released with nvmem_device_put() on the success or read-failure paths, causing a permanent reference leak. The driver’s retry logic on subsequent battery property reads can compound this leak, preventing the nvmem device from ever being freed. Found by code review. | ||||