Export limit exceeded: 393553 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (393553 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89899 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cec: disable delayed work before freeing an interrupted transmit cec_transmit_msg_fh() drops adap->lock to wait for a blocking transmit in wait_for_completion_killable(). If that wait is interrupted by a signal, cancel_delayed_work_sync() can run before the CEC kthread arms the reply timeout via schedule_delayed_work(&data->work) in cec_transmit_done_ts(). The work is then armed after the cancel, and the data is freed with its delayed_work still pending: ODEBUG: free active (active state 0) object: ... hint: cec_wait_timeout Use disable_delayed_work_sync(): it cancels the work and disables it, so the later schedule_delayed_work() becomes a no-op and the work cannot be re-armed. The data is freed right after, so it need not be re-enabled. | ||||
| CVE-2026-89898 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cec: extron-da-hd-4k-plus: add sanity check Add check to prevent overflowing msg.msg[] in case the incoming data is malformed. | ||||
| CVE-2026-89897 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cec: Serialize exclusive follower delivery cec_receive_notify() reads the exclusive follower pointer without the adapter lock. Serialize the no-follower check and message delivery against mode changes and release. | ||||
| CVE-2026-89896 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cedrus: fix memory leak in cedrus_init_ctrls() In cedrus_init_ctrls(), the V4L2 control handler is initialized before allocating memory for ctx->ctrls. If this allocation fails, the function returns -ENOMEM without freeing the previously allocated handler resources, leading to a memory leak. Fix this by calling v4l2_ctrl_handler_free() on the ctx->ctrls allocation failure path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an Allwinner SoC or board with a Cedrus VPU available to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-89895 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cobalt: Avoid freeing ALSA private data twice snd_cobalt_card_create() stores cobsc in sc->private_data and installs snd_cobalt_card_private_free() as sc->private_free. From that point, snd_card_free(sc) releases cobsc through the ALSA card cleanup path. If cobalt_alsa_init() fails after snd_cobalt_card_create(), the err_exit_free path calls snd_card_free(sc) and then kfree(cobsc). That second free releases the same object again. Remove the explicit kfree(cobsc) and leave ownership with the ALSA card. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-89894 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: reject geometry changes while the VBI queue is busy vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide dev->width / dev->norm but only refuse the change when the *video* queue (dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry: cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm, the VBI videobuf2 plane is sized from dev->width / dev->norm in vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then recomputes the destination offset from the *live* dev->width and the latched lines_per_field on every URB completion: offset = lines_completed * (dev->width << 1) + ...; if (dma_q->current_field == 2) offset += dev->width * 2 * dma_q->lines_per_field; memcpy(plane + offset, p_buffer, lencopy); Because the VBI node shares video_ioctl_ops with the video node, an application can size a small VBI plane (REQBUFS/QBUF with a small width, or with the NTSC standard), then enlarge dev->width (or switch dev->norm to PAL) through the video node while the VBI stream is running -- the change is allowed because only dev->vidq is checked -- and let the device deliver a field-2 VBI payload. cx231xx_do_vbi_copy() now computes the offset with the larger geometry and memcpy()s past the end of the smaller plane that was already allocated, a heap out-of-bounds write whose offset is attacker-chosen and whose contents come from the device. The per-field guard in cx231xx_copy_vbi_line() does not help: it bounds the copy against the latched lines_per_field, not the plane's real capacity, and vb2 does not re-run buf_prepare() for an already prepared buffer. Refuse the format/standard change when the VBI queue is busy as well, so the geometry cannot change underneath an allocated VBI buffer. | ||||
| CVE-2026-89893 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cx23885: cancel NetUP CI work before teardown netup_ci_exit() frees a netup_ci_state while its work item, netup_read_ci_status(), may still be pending or running on the system workqueue. The worker obtains the state with container_of() and dereferences it, so it must not outlive the state. netup_ci_init() queues the initial status read, and CI GPIO interrupts subsequently queue the same work from netup_ci_slot_status(). During remove, cx23885_finidev() calls free_irq() before the CI device is unregistered. free_irq() prevents further IRQ handlers from running, but does not drain work queued previously, so the worker can run after netup_ci_exit() frees the state. Call cancel_work_sync() before dvb_ca_en50221_release() and kfree(). This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-89892 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: em28xx: defer audio-only extension registration The audio-only path registers extensions while probing the primary device. For a dual-TS board, this happens before dev_next is created. The duplicate device inherits is_audio_only and is then independently inserted into em28xx_devlist. The list is intended to contain only primary devices: extension operations reach the secondary device through dev_next. The independently linked secondary can be freed during disconnect while its list node remains reachable, resulting in a use-after-free. Defer audio-only extension registration to the module-request work item. It runs only after probing has completed construction of the optional secondary device, so only the primary is registered and extension callbacks reach the secondary through dev_next. | ||||
| CVE-2026-89891 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free of dev_next->devlist on disconnect When a device with has_dual_ts=1 is probed and the is_audio_only path is taken, both dev and dev->dev_next are added to the global em28xx_devlist via em28xx_init_extension(). However, during disconnect, em28xx_close_extension(dev) only calls list_del(&dev->devlist), leaving dev->dev_next->devlist still linked in the global list. When dev_next is subsequently freed via kref_put(), its devlist entry becomes a dangling pointer in em28xx_devlist. The next device probe that calls em28xx_init_extension() triggers a list corruption BUG when list_add_tail detects the freed node. This bug was exposed by commit a368ecde8a50 ("USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor") which clears reserved bits in bEndpointAddress during endpoint parsing. This causes fuzzed endpoint addresses like 0xf3 to be normalized to 0x83, which em28xx interprets as a vendor audio endpoint, enabling the is_audio_only + has_dual_ts code path that was previously unreachable with such descriptors. Fix this by removing dev->dev_next->devlist from the global list in em28xx_close_extension() before the device is freed. | ||||
| CVE-2026-89890 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: go7007: defer the ALSA v4l2 put until card release go7007_snd_init() already takes a v4l2_device reference for the ALSA side, but go7007_snd_remove() drops it immediately after calling snd_card_free_when_closed(). That is too early when a userspace process still has the capture PCM open. The ALSA card and its PCM callbacks remain alive until the last file is closed, so the release path can still reach struct go7007 through pcm->private_data and call go7007_snd_hw_free() after the V4L2 release path has freed the object. Move the matching v4l2_device_put() to the ALSA card private_free callback so the existing ALSA reference covers the whole deferred card lifetime. | ||||
| CVE-2026-89889 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: imx415: Release runtime PM reference on VBLANK error The VBLANK path returned immediately when programming VMAX failed after pm_runtime_get_if_in_use() had taken a runtime PM reference. Break out of the switch instead so the common pm_runtime_put() path is used. | ||||
| CVE-2026-89888 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov02a10: fix endpoint parsing use-after-free The ov02a10_check_hwcfg() function calls fwnode_handle_put(ep) immediately after allocating and parsing the endpoint. However, it subsequently calls fwnode_property_read_u32() using the same 'ep' handle, leading to a potential use-after-free. Additionally, reading the optional 'ovti,mipi-clock-voltage' property used to overwrite the 'ret' variable. If the property was missing, 'ret' would become negative, and this failure code would be incorrectly returned at the end of the function, causing probe to fail entirely. Fix the use-after-free by moving fwnode_property_read_u32() before the endpoint is parsed and freed. Avoid the error leak by not assigning the result of fwnode_property_read_u32() to 'ret'. | ||||
| CVE-2026-89887 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov7740: fix use-after-destroy in remove The ov7740_remove() function had a severe teardown order bug where it destroyed the driver's mutex before freeing the V4L2 control handler which relies on that mutex, leading to a use-after-destroy kernel panic. Furthermore, the driver explicitly called v4l2_ctrl_handler_free() and mutex_destroy() sequentially, but then called ov7740_free_controls() which invokes both of them a second time, resulting in a double-free. This patch fixes the issue by unregistering the subdevice first, and relying exclusively on ov7740_free_controls() to safely tear down the mutex and control handler in the correct order. | ||||
| CVE-2026-89886 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: intel/ipu6: fix async notifier cleanup leak on parse error isys_notifier_init() calls v4l2_async_nf_init() and then adds fwnode remote subdevs in a loop with v4l2_async_nf_add_fwnode_remote(). If an endpoint parse or add fails partway through the loop, it jumps to err_parse and returns without calling v4l2_async_nf_cleanup(), leaking every v4l2_async_connection already added to the notifier's waiting list. The register-failure path just below already cleans up correctly, and the caller only tears the notifier down (isys_notifier_cleanup()) once isys_notifier_init() has returned success. Clean up the notifier on the parse error path too. | ||||
| CVE-2026-89885 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: platform: mtk-mdp3: Fix SCP device refcounting mdp_probe() first tries to get the SCP handle with scp_get(). When that fails, it falls back to looking up the SCP platform device with __get_pdev_by_id() and then reads its driver data. The fallback lookup returns the platform device with a reference, just like scp_get() does. However, the fallback path currently drops that reference immediately after platform_get_drvdata(). The driver later still calls scp_put(mdp->scp) unconditionally from the probe error path and from mdp_video_device_release(), which drops the SCP device reference again. Keep the fallback reference until the existing scp_put() call, so that the fallback path follows the same ownership rules as the scp_get() path. | ||||
| CVE-2026-89884 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: platform: mtk-mdp3: fix NULL deref on failed SCP lookup Add the missing sanity check after looking up the SCP to avoid dereferencing a NULL-pointer in case its driver has not yet been bound. | ||||
| CVE-2026-89883 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() succeeds, later probe failures must undo the registration with rc_unregister_device(). The current error path jumps to the allocation cleanup label and only calls rc_free_device(), leaving the rc device registration and resources created by rc_register_device() behind. Add a registered-device unwind label for the IRQ lookup, IRQ request, and hardware initialization failure paths. Keep rc_free_device() for failures before rc_register_device() succeeds. | ||||
| CVE-2026-89882 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rkvdec: hevc: guard INTER_REF_PIC_SET_PRED index underflow st_ref_pic_set_prediction() computes the reference RPS index as st_rps_idx - (delta_idx_minus1 + 1) per HEVC spec equation 7-59. Both operands are u8, so when delta_idx_minus1 + 1 exceeds the current index the subtraction wraps and the subsequent array access at calculated_rps_st_sets[ref_rps_idx] reads far out of bounds. A userspace V4L2 client that can open the RKVDEC m2m decoder can submit an EXT_SPS_ST_RPS control with INTER_REF_PIC_SET_PRED set and delta_idx_minus1 crafted to trigger the underflow. Reject the entry early when the reference index would underflow. | ||||
| CVE-2026-89881 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev->vdev) and move it before clearing dev->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs rtl2832_sdr_stop_streaming() if streaming is active, so URBs and coherent DMA stream buffers are freed while dev->udev is still valid. vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock) internally, and stop_streaming() locks v4l2_lock, so the previous outer mutex_lock(&dev->vb_queue_lock) / mutex_lock(&dev->v4l2_lock) pair around the unregister sequence would self-deadlock and has been removed. A short v4l2_lock critical section around dev->udev = NULL remains so any ioctl path that still holds the file descriptor sees coherent state. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-89880 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(), rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and shares a single err: label that only unlocks the mutex and returns. When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs() itself returns -ENOMEM after alloc_stream_bufs() has already succeeded, the URBs and/or the coherent DMA stream buffers stay allocated while streaming reports failure to vb2. Two latent defects follow on the next VIDIOC_STREAMON: 1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently leaking the coherent DMA memory allocated by the previous attempt. 2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only increments it. After a second successful pass urbs_initialized can exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks from urbs_initialized - 1 down to 0 and reads past the end of dev->urb_list[], passing garbage pointers to usb_free_urb(). Mirror the teardown that stop_streaming() already performs: on the error path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs() before unlocking. Both helpers are idempotent (free_urbs kills and zeros urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the buf_num counter), so partial-failure paths and the no-allocation paths remain safe. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||