Export limit exceeded: 393576 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (393576 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90036 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during blocked-lock reaping A bare lock owner -- its only remaining reference a blocked lock on nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but no reference keeping the client alive. When the per-net laundromat reaps such a lock, freeing the nbl drops the owner reference held through flc_owner, and the final nfs4_put_stateowner() takes the client's cl_lock. Because the laundromat detaches the nbl first, __destroy_client() no longer finds it, so a concurrent force_expire_client() can free the client before nfs4_put_stateowner() runs, dereferencing cl_lock in freed memory. Pin the client with cl_rpc_users before dropping nn->blocked_locks_lock, and skip clients already expiring, whose blocked locks __destroy_client() frees while holding an owner reference. Take nn->client_lock outside nn->blocked_locks_lock. Every other site holds nn->blocked_locks_lock as a leaf, acquiring no further lock, so placing nn->client_lock outside it cannot form a lock-order cycle. | ||||
| CVE-2026-90035 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix division by zero in get_estimated_bw() get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity, which is zeroed by reset_bw_alloc_struct() and only populated once DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled. link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler, calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED has ever fired for that link. A connected USB4/DPIA tunneling device that reports an estimated-bandwidth change before ever reporting a capability change drives a division by zero in this IRQ path. link_dpia_send_bw_alloc_request() already guards the same bw_granularity division; add the identical guard here rather than introducing a new pattern. (cherry picked from commit f2a961457c33dc34223aad5c9e8971de34a4eed3) | ||||
| CVE-2026-90034 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: change kmalloc() to kzalloc() Change the kmalloc() calls in usb_mdc800_init() for irq_urb_buffer and download_urb_buffer to kzalloc(), avoiding potential stack leaks if a shorter message is received in mdc800_usb_irq() and mdc800_usb_download_notify() | ||||
| CVE-2026-90033 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output() The snd_usbmidi_us122l_output() picks a count of 2 on anything slower than high speed and never relates it to ep->max_transfer. The URB buffer holds exactly max_transfer bytes, so a device declaring a one byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX. Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at 0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the USB core only clamps downward. The akai and novation output ops in this file were given the same guard recently. Do the same here. | ||||
| CVE-2026-90032 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: usbtv: keep device alive while ALSA card exists The ALSA PCM callbacks store the driver state in pcm->private_data. An open PCM file can outlive USB disconnect because usbtv_audio_free() uses snd_card_free_when_closed(). The disconnect path can then drop the V4L2 device reference and free struct usbtv before ALSA releases the substream, so a later close dereferences freed memory in snd_usbtv_pcm_close(). Take a V4L2 device reference for the ALSA card and drop it from the card private_free callback. This keeps struct usbtv valid until ALSA has closed the remaining files and freed the card. | ||||
| CVE-2026-90031 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb-storage: ene_ub6250: fix race between scan work and probe ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage infrastructure and schedules the delayed scan work. The driver then calls ene_get_card_type(), which sends an ENE command through ene_send_scsi_cmd() and the usb-storage bulk transfer helpers. Both the delayed scan work, through usb_stor_Bulk_max_lun(), and ene_get_card_type() use us->current_urb. The scan work serializes this access with us->dev_mutex, but the ENE card-type probe does not. If the scan work runs while ene_get_card_type() is still using us->current_urb, usb_submit_urb() warns that the URB is already active. Serialize ene_get_card_type() with us->dev_mutex, matching the locking used by the scan path. | ||||
| CVE-2026-90030 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations. | ||||
| CVE-2026-90029 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: storage: realtek_cr: fix use-after-free on disconnect realtek_cr_destructor() calls timer_delete() before the chip containing the timer is freed. The timer callback may still be running and can rearm itself, resulting in a use-after-free. Use timer_shutdown_sync() to wait for the callback and prevent further rearming. Do this unconditionally because ss_en may be changed after the timer is armed. Move timer_setup() into init_realtek_cr() so the timer is initialized before any failure path can invoke the destructor. Found by static analysis. | ||||
| CVE-2026-90028 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: hd3ss3220: track VBUS enable state per consumer regulator_is_enabled() reports the aggregate regulator state, not whether this consumer holds an enable reference. If another consumer enables VBUS first, the driver can skip its own regulator_enable() call and later attempt to drop a reference it never acquired, triggering an unbalanced regulator disable warning. Track successful enable and disable calls locally. Keep the state unchanged when an operation fails so a later role or ID notification retries the operation while this consumer keeps balanced references. | ||||
| CVE-2026-90027 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop cc_debounce_dwork is queued from the set_cc() and start_toggling() callbacks, which run from TCPM's kthread worker. port_stop() returns before tcpm_unregister_port() destroys that worker. Flushing the worker during unregister may therefore run a callback which queues the delayed work after port_stop() has returned. The delayed work can then run after devres has freed pmic_typec_port. Use disable_delayed_work_sync() in port_stop() to cancel a pending instance and prevent the TCPM callbacks from queueing another one. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-90026 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: cancel reset_work on stop pdphy_stop() disables IRQs but leaves reset_work pending. If the IRQ handler schedules it just before disable_irq(), the work runs after remove() frees the struct via devm. Call cancel_work_sync() after disabling IRQs to close the window. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-90025 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: displayport: Fix OOB altmode array index The UCSI displayport driver indexes the connector's port altmode array with the GET_CURRENT_CAM response after checking it is not 0xff. The port altmode array is UCSI_MAX_ALTMODES elements long. If the PPM returns an invalid GET_CURRENT_CAM response above UCSI_MAX_ALTMODES and not equal to 0xff, the kernel may crash with an array index OOB error. Update the UCSI displayport driver to verify the current cam is less than UCSI_MAX_ALTMODES before accessing the port altmode array. | ||||
| CVE-2026-90024 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs A null-pointer dereference occurs in f_midi2_free_ep_reqs() when attempting to clean up an endpoint that was never initialized. When configuring the MIDI 2.0 gadget via configfs and setting the block direction to SNDRV_UMP_DIR_INPUT, the initialization of the midi1_ep_out endpoint is explicitly skipped during the gadget bind phase (f_midi2_bind()). As a result, the usb_ep->card field remains NULL. Later, when the host sets the alternate setting, f_midi2_set_alt() unconditionally stops both the IN and OUT endpoints by calling f_midi2_stop_eps(), which in turn calls f_midi2_free_ep_reqs() for both endpoints. When f_midi2_free_ep_reqs() is called for the uninitialized midi1_ep_out, it attempts to dereference usb_ep->card to determine the number of requests to free, leading to a crash. Fix this by using usb_ep->num_reqs instead of usb_ep->card->info.num_reqs in f_midi2_free_ep_reqs(). usb_ep->num_reqs is correctly set during f_midi2_init_ep() and remains 0 if the endpoint was never initialized, safely avoiding the loop. For consistency, apply the same change to f_midi2_alloc_ep_reqs(). Oops: general protection fault, probably for non-canonical address 0xdffffc00000000ee: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000770-0x0000000000000777] ... RIP: 0010:f_midi2_free_ep_reqs drivers/usb/gadget/function/f_midi2.c:1166 [inline] RIP: 0010:f_midi2_stop_eps+0x28e/0x4d0 drivers/usb/gadget/function/f_midi2.c:1246 ... Call Trace: <TASK> f_midi2_set_alt+0x11c/0xf00 drivers/usb/gadget/function/f_midi2.c:1296 composite_setup+0x1ffd/0x3480 drivers/usb/gadget/composite.c:1933 configfs_composite_setup+0xbd/0x100 drivers/usb/gadget/configfs.c:1877 | ||||
| CVE-2026-90023 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers() Previously fsg_num_buffers_validate() was removed as it was not necessary due to Kconfig setting the limits for n from 2 to 256 with default as 2. However, setting the page content in such a way that kstrtou8() reflects n value as either 0 or 1 bypasses these restrictions leading to a null pointer dereference if n is 0. Fix this by adding a check for n < 2 and returning -EINVAL if n is either 0 or 1 consistent with Kconfig logic. | ||||
| CVE-2026-90022 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi2: fix use-after-free in string attribute show path f_midi2_opts_str_show() takes the string lock internally, but its callers dereference the opts->info.<field> pointer before calling it, outside the lock. This races with f_midi2_opts_str_store(), which frees the old string under opts->lock when the attribute is written concurrently, the show path can read a pointer that gets freed before the lock inside str_show() is even taken. Change f_midi2_opts_str_show() to take a pointer to the string field, matching the existing pattern in f_midi2_opts_str_store(), and dereference it only after the lock is held. Update all three callers (iface_name, block name, and the EP string option macro) accordingly. | ||||
| CVE-2026-90021 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: initialize work in f_midi_alloc() f_midi_alloc initializes free_ref to 1 and it can only be incremented when a sound card is registered via f_midi_register_card(). f_midi_register_card() is only called in f_midi_bind() which actually performs INIT_WORK. If f_midi_bind() is never run, work is not initialized and the if condition in f_midi_free becomes true, this results in a warning later in __flush_work as work->func = 0. Fix this by moving INIT_WORK from f_midi_bind() to f_midi_alloc(). | ||||
| CVE-2026-90020 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl() gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but dev->state is checked after acquiring the lock. Therefore a concurrent bind can change the device state between these operations, which can leave ioctl with a stale NULL gadget pointer and causing a NULL pointer dereference at gadget->ops->ioctl. Read dev->gadget while holding dev->lock so that the gadget pointer and device state are sampled consistently. | ||||
| CVE-2026-90019 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: fix null pointer dereference in usb_put_function_instance() usb_put_function_instance() attempts to dereference fd inside fi struct to get mod in uvc_alloc_inst() error path. However, fd is not allocated until later in try_get_usb_function_instance() after allocating fi in uvc_alloc_inst() and thus guranteed to be null in error path. Fix this by adding a null check for fi->fd that returns if fd is null. | ||||
| CVE-2026-90018 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr() rtw_get_wps_attr() walks WPS attributes inside a WPS IE taken from a wireless management frame. For each candidate attribute it only checks that the fixed 4-byte attribute header (2-byte ID + 2-byte length) fits inside the IE: if (attr_ptr + 4 > wps_ie + wps_ielen) break; u16 attr_id = get_unaligned_be16(attr_ptr); u16 attr_data_len = get_unaligned_be16(attr_ptr + 2); u16 attr_len = attr_data_len + 4; attr_data_len (and therefore attr_len) is read directly from the wire and is never checked against the remaining bytes in the IE before being used as the size of: memcpy(buf_attr, attr_ptr, attr_len); Since attr_len is fully attacker controlled (0 to 65535+4), this is both a heap OOB read of wps_ie, and, more seriously, a stack buffer overflow at several call sites where buf_attr is a single-byte stack variable, e.g. rtw_get_wps_attr_content()'s callers passing WPS_ATTR_SELECTED_REGISTRAR into a stack "u8 sr"/"u8 selected_registrar" (drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c, drivers/staging/rtl8723bs/core/rtw_mlme_ext.c). A crafted WPS IE in a beacon or probe response processed during scanning can therefore smash the stack of the parsing thread. rtw_get_wps_attr_content() itself has no independent length check and simply trusts the attr_len it gets back from rtw_get_wps_attr(), so fixing the bound here also fixes that caller. The "attr_ptr + 4 > wps_ie + wps_ielen" header check above was added by commit 1463ca3ec6601 ("staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()"), which bounded the fixed header but never extended the check to cover the variable-length attribute data that follows it. Add that missing check before attr_len is used as a memcpy() length or accepted as a match. | ||||
| CVE-2026-90017 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_action_frame_parse() rtw_action_frame_parse() takes a frame_len parameter but never actually checks it before indexing into the frame body: const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr); ... c = frame_body[0]; ... a = frame_body[1]; frame_body already points 24 bytes (sizeof(struct ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and frame_body[1] requires frame_len >= 26. A management action frame shorter than that (e.g. exactly 24 bytes, the minimum a malicious peer can send) causes a 1-2 byte out-of-bounds read. This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass attacker/user-influenced frame buffers and lengths straight through. Add the missing length check before frame_body is dereferenced. | ||||