Export limit exceeded: 390743 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390743 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390743 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-81954 | 1 Microsoft | 18 365, 365 Apps, Excel and 15 more | 2026-09-12 | 7.8 High |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-90474 | 2026-09-12 | 6.8 Medium | ||
| MCPHub before 1.0.32 contains an authentication bypass vulnerability in its embedded OAuth 2.0 authorization server where client authentication is disabled by default and PKCE enforcement is optional. Attackers who obtain an authorization code through interception can redeem it for access tokens without providing a client secret or PKCE verifier, gaining access to victim accounts and their privileges. | ||||
| CVE-2026-90473 | 1 Msgpack | 1 Messagepack | 2026-09-12 | 5.3 Medium |
| msgpack-java through 0.9.12 contains an integer overflow vulnerability in MessageUnpacker.skipValue() when processing MAP32 containers with large element counts. Attackers can supply a MAP32 element count at or above 0x40000000 that wraps when doubled, causing the parser cursor to desynchronize and attacker-controlled data to be returned in place of later fields. | ||||
| CVE-2026-90472 | 1 Msgpack | 1 Messagepack | 2026-09-12 | 5.3 Medium |
| msgpack-java through 0.9.12 contains a stack overflow vulnerability in MessageUnpacker.unpackValue() that recursively deserializes arrays and maps without nesting depth limits. Attackers can craft payloads with deeply nested arrays to exhaust the deserializing thread's stack and trigger StackOverflowError, causing per-request deserialization failures. | ||||
| CVE-2026-89532 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix pcl_for_each_segment for empty chunks When a parsed chunk list contains a chunk whose ch_segcount is zero, pcl_for_each_segment computes its inclusive upper bound as &chunk->ch_segments[ch_segcount - 1]. ch_segcount is u32, so the subtraction wraps to 0xFFFFFFFF and the bound lands far past the ch_segments flex array. The loop body then walks unrelated memory at sizeof(struct svc_rdma_segment) stride until it faults. A zero-segcount chunk is reachable from the wire: xdr_check_write_chunk() only rejects segcount values greater than rc_maxpages, and pcl_alloc_write() links a freshly allocated chunk onto rc_write_pcl/rc_reply_pcl before its segment-fill loop runs, so a Write or Reply chunk advertising zero segments leaves ch_segcount == 0 on the list. When the transport has negotiated Send-With-Invalidate, svc_rdma_get_inv_rkey() iterates all four PCLs with pcl_for_each_segment and dereferences segment->rs_handle on each iteration, turning the underflow into an out-of-bounds read and a general protection fault. xdr_check_write_list / xdr_check_reply_chunk pcl_alloc_write() chunk = pcl_alloc_chunk(...) /* ch_segcount = 0 */ list_add_tail(&chunk->ch_list, &pcl->cl_chunks) /* fill loop iterates zero times for wire segcount 0 */ svc_rdma_get_inv_rkey() pcl_for_each_chunk(rc_write_pcl) pcl_for_each_segment(segment, chunk) pos <= &ch_segments[0u - 1u] /* 0xFFFFFFFF */ segment->rs_handle /* OOB read -> GPF */ Fix by switching the macro to a half-open upper bound that uses ch_segcount directly. For ch_segcount == 0 the loop start equals the loop end and the body is skipped; for ch_segcount > 0 the iteration range is unchanged. All six existing call sites in net/sunrpc/xprtrdma/svc_rdma_recvfrom.c and net/sunrpc/xprtrdma/svc_rdma_rw.c remain correct under the new bound, so no caller changes are needed. | ||||
| CVE-2026-89551 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: xdr_buf_trim: clamp buf->len to avoid underflow xdr_buf_trim() trims `len` bytes from the tail of an xdr_buf by walking the tail, pages, and head iovecs. Each per-section step uses min_t() so it never removes more bytes than that section holds, but the final accounting at the fix_len label subtracts the total bytes actually consumed from buf->len without any clamp: fix_len: buf->len -= (len - trim); When the caller has set buf->len to a value smaller than the sum of the iov_lens, (len - trim) can exceed buf->len and the unsigned subtraction wraps to near UINT_MAX. gss_krb5_unwrap_v2() reaches xdr_buf_trim() in exactly that state: buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip; buf->len = len - (GSS_KRB5_TOK_HDR_LEN + headskip); xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip); buf->len is a small wire-derived value while the iov_lens are at page scale, so the per-section loops legitimately consume far more bytes than buf->len records. The wrapped buf->len then propagates as the authoritative stream bound into every downstream XDR decoder. Fix by clamping the decrement so buf->len bottoms out at zero: buf->len -= min_t(unsigned int, buf->len, len - trim); On the normal path where the iov_lens sum to buf->len, (len - trim) is always <= buf->len and the result is identical to before. No callers change behavior outside the underflow case. | ||||
| CVE-2026-89770 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: don't free integrity payload that doesn't exist fs_bio_integrity_alloc might not allocate a bio integrity payload if PI verification is disabled on the block device. Check for that case before calling fs_bio_integrity_free in iomap_bio_read_folio_range_sync to avoid a NULL pointer dereferences. Make the branch cover the PI verification as well - while fs_bio_integrity_verify works without an integrity payload, it requires one to actually do useful work. | ||||
| CVE-2026-89487 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: only skb_tx_error() a packet we are about to drop queue_userspace_packet() borrows the packet skb -- it only copies it into a private netlink message (user_skb) and does not own it; on return do_execute_actions() keeps forwarding it through the flow's remaining actions. Its error path nevertheless calls skb_tx_error(skb), which via skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY, stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc says "skb must be freed afterwards"). For a MSG_ZEROCOPY skb carrying page-cache frags, SKBFL_SHARED_FRAG is what makes esp_input() skb_cow_data() before in-place AEAD; once it is stripped a later local ESP-in-UDP delivery decrypts in place over pages the sender does not own -- an unprivileged page-cache write (the "Fragnesia" primitive). do_execute_actions() ignores output_userspace()'s return value, so any action after a failed USERSPACE upcall inherits the stripped skb. Move the skb_tx_error() to the flow-miss drop path - the "default" branch of ovs_dp_process_packet()'s switch(error), before kfree_skb(). The call has been here since commit 36d5fe6a0007 ("core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors") but was harmless until esp_input() began relying on SKBFL_SHARED_FRAG to gate in-place decrypt; only then did stripping it on a still-forwarded skb become a page-cache write primitive. | ||||
| CVE-2026-89561 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv() ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL check when reading idev->cnf.rpl_seg_enabled. When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with dev->ip6_ptr already NULL. Reproduced by flooding the receiving interface with ping6 traffic while flapping its MTU between 1500 and 1200: BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070 Read of size 4 at addr 00000000000006b4 by task ping6/394 CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full) Call Trace: <IRQ> kasan_report+0xc6/0x100 ipv6_rpl_srh_rcv+0xb3/0x1070 ip6_protocol_deliver_rcu+0x759/0x9a0 ip6_input_finish+0xa8/0x1b0 ip6_input+0xe1/0x490 ipv6_rcv+0x33d/0x460 __netif_receive_skb_one_core+0xd6/0x130 process_backlog+0x2cc/0xa00 __napi_poll.constprop.0+0x56/0x270 net_rx_action+0x327/0x730 handle_softirqs+0x11e/0x630 do_softirq+0xb3/0xf0 </IRQ> Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from ipv6_rthdr_rcv(), which already has an idev lookup. Fix the NULL dereference on the RPL path by checking idev in ipv6_rthdr_rcv(), before it calls either function. The callees take idev as an argument and no longer call __in6_dev_get(), so the packet is now dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths. | ||||
| CVE-2026-89632 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr() reparse_buf_ptr() reads buf->ReparseDataLength before checking that count covers the full fixed header: buf = (struct reparse_data_buffer *)((u8 *)io + off); len = sizeof(*buf); /* 8 bytes */ rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */ if (count < len || count < rdlen + len) /* check comes after */ struct reparse_data_buffer has ReparseDataLength at offset 4. If a server returns OutputCount < 6, the read at offset 4-5 reaches past the end of the received data. The off+count bounds against iov_len were already validated, but that does not protect against count being smaller than sizeof(*buf). Split the check: verify count >= sizeof(*buf) before reading ReparseDataLength, then verify count covers the data region. | ||||
| CVE-2026-89728 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: renesas: Fix out-of-bounds access for newdevs mask When software initiates DAA (Dynamic Address Assignment), the controller reports the result via the NRSPQP (Normal Response Queue Port Register). The data length field of the response descriptor, which is accessible through the NRSPQP register, indicates the number of devices remaining after DAA. Consequently, when the bus is empty, this field contains the maximum number of devices supported by the controller (8 for the Renesas I3C controller). Adjust the condition that computes the newly discovered devices bitmask to prevent an out-of-bounds when the I3C bus is empty. | ||||
| CVE-2026-89730 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: altera-cvp: Avoid out-of-bounds read in trailing byte write The trailing byte path in altera_cvp_send_block() dereferences a u32 pointer even when only 1-3 bytes remain in the input buffer. If the buffer ends at a page or scatterlist boundary, this can read past the valid image data and fault. Copy the remaining bytes into a zero-initialized u32 before writing the final word so only valid bytes are read from the input buffer. | ||||
| CVE-2026-89734 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init() In uvcg_video_init(), if kthread_run_worker() fails, the error logged uses uvcg_err(), however, the pointer it uses: video->uvc is not assigned at this point, triggering a null pointer dereference. Fix this by directly using uvc->func which is assigned already. | ||||
| CVE-2026-89172 | 2026-09-12 | N/A | ||
| Improper protection of physical side channels vulnerability in Microchip AN1044, Microchip AN953, and Microchip SW300052. This issue affects AN1044: through A; AN953: through A; SW300052: through 2.6. | ||||
| CVE-2026-89619 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer quickspi_hid_raw_request() receives the caller's buffer length in len, but quickspi_get_report() never sees it and copies the whole device-supplied response into buf regardless: memcpy(buf, qsdev->report_buf, qsdev->report_len); qsdev->report_len comes from the input report the touch controller returns, while buf is sized to whatever the caller asked hidraw for through HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf with device-controlled content. The intel-quicki2c sibling already passes the caller length down to quicki2c_get_report() and validates the response against it before the copy. Do the same here. | ||||
| CVE-2026-89705 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths nfsd_dispatch() sets rq_status_counter to an odd value once a request has been decoded, and back to an even value once it has been fully processed, forming a seq-lock like protocol with the lockless reader in nfsd_nl_rpc_status_get_dumpit(). Only the fully successful path restored the counter to even. The cache-hit (RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return after the odd-valued store without ever bringing the counter back to even. Once one of those paths is taken, rq_status_counter is left odd: the next request's decode ORs in 1 (still odd) and only a subsequent successful encode restores even. While stuck odd, the dumpit reader treats the rqstp fields as stable and its retry check compares against the same unchanging odd value, so it never detects concurrent mutation. This exposes actively mutating fields (e.g. args->ops / args->opcnt during compound decode and release) to the lockless reader, which can read past the end of the 8-element inline ops array. Add a helper that advances the counter to the next even value and call it on every return path that follows the odd-valued store. The decode-error path is left untouched as it is reached before the counter is set odd. | ||||
| CVE-2026-89739 | 1 Linux | 1 Linux Kernel | 2026-09-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM event is received. If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and the memory allocated for dep with kzalloc() is released by kfree(dep), while the delayed work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | dwc3_thread_interrupt | dwc3_endpoint_interrupt | dwc3_gadget_endpoint_stream_event | queue_delayed_work(system_percpu_wq, | &dep->nostream_work) dwc3_gadget_free_endpoints | dwc3_free_trb_pool(dep) | list_del(&dep->endpoint.ep_list) | dwc3_debugfs_remove_endpoint_dir(dep) | kfree(dep) | // dep is freed | | dwc3_nostream_work | // use dep (use-after-free) Fix it by canceling the delayed work before kfree(dep) in dwc3_gadget_free_endpoints. | ||||
| CVE-2026-89691 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: clear opcnt on compound arg release to prevent OOB read nfsd4_release_compoundargs() resets args->ops to the inline iops[8] array when the dynamically-allocated ops buffer is freed, but leaves args->opcnt at its original value (which can be up to 200 for NFSv4.1+ compounds). If rq_status_counter is stuck at an odd value (which can happen when nfsd_dispatch() hits an error path after setting it odd), the RPC status dumpit handler reads min(opcnt, 16) entries from args->ops[]. Since iops only has 8 elements and is the last field in struct nfsd4_compoundargs, reading indices 8-15 accesses adjacent slab memory and leaks it to userspace via netlink. Zero opcnt unconditionally in nfsd4_release_compoundargs() so stale compound metadata is never exposed through the status interface. [ cel: Remove the kvfree_rcu_mightsleep() sleep from the exposure window ] | ||||
| CVE-2026-89696 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: block non-SAVEFH ops after FOREIGN PUTFH to prevent NULL deref When CONFIG_NFSD_V4_2_INTER_SSC is enabled, nfsd4_putfh() can return success with fh_dentry and fh_export both NULL if fh_verify() returns nfserr_stale and putfh->no_verify is true. The NFSD4_FH_FOREIGN flag is set, but the compound dispatch loop only uses this flag to bypass the nfserr_nofilehandle check -- it does not prevent subsequent ops from running with a NULL fh_dentry. A remote client can exploit this by crafting a COMPOUND that includes an inter-SSC COPY (which causes check_if_stalefh_allowed() to set no_verify=true on the saved PUTFH) with an additional op inserted between the source PUTFH and SAVEFH. For example, SETATTR calls fh_want_write() which dereferences fh_export->ex_path.mnt without calling fh_verify() first, causing a NULL pointer dereference in the nfsd kthread. Fix this by gating the dispatch loop: when NFSD4_FH_FOREIGN is set and fh_dentry is NULL, only OP_SAVEFH (needed for the inter-SSC flow) and ops with ALLOWED_WITHOUT_FH (which don't need a resolved filehandle) may proceed. All other ops receive nfserr_stale, per RFC 7862 Section 15.2.3 which specifies that foreign filehandle validation is deferred to the consuming operation and NFS4ERR_STALE returned at that point. | ||||
| CVE-2026-90461 | 1 Openstack | 1 Ironic | 2026-09-12 | 6.3 Medium |
| OpenStack Ironic through 38.0.0 may send a username and password to an unexpected remote host when Image Service is configured for HTTP(S) Basic Authentication. | ||||