| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory.
Software installed and run under a Guest VM can send commands to the GPU which result in out of bounds memory accesses. These can be used to escalate privileges. |
| Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory.
Out of bounds accesses triggered by malware introduced to a Guest KMD could allow privilege escalation which escapes virtualization boundaries. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on f2fs_get_node_folio_ra()
kernel BUG at fs/f2fs/file.c:845!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845
Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90
RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283
RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000
RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504
RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002
R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001
R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039c
FS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0
Call Trace:
<TASK>
f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882
f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940
f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907
evict+0x61e/0xb10 fs/inode.c:841
f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224
get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694
vfs_get_tree+0x92/0x2a0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline]
do_new_mount_fc fs/namespace.c:3758 [inline]
do_new_mount+0x341/0xd30 fs/namespace.c:3834
do_mount fs/namespace.c:4167 [inline]
__do_sys_mount fs/namespace.c:4383 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4360
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
count = ADDRS_PER_PAGE(dn.node_folio, inode);
count -= dn.ofs_in_node;
f2fs_bug_on(sbi, count < 0);
The fuzz test will trigger above bug_on in f2fs.
The root cause should be: in the corrupted inode, there is a direct node
which has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(),
after f2fs_get_dnode_of_data() finds such dnode:
1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 923
2) once dn.ofs_in_node points to addr[923, 1017]
Then it will trigger the system panic.
Let's introduce NODE_TYPE_NON_IXNODE to indicate current node should
not be an inode or xattr node, and then use it in below path to detect
inconsistent node chain in inode mapping table:
- f2fs_do_truncate_blocks
- f2fs_get_dnode_of_data
- f2fs_get_node_folio_ra
- __get_node_folio
- f2fs_sanity_check_node_footer
- case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix partial invalidation of streaming-write folio
In netfs_invalidate_folio(), if the region of a partial invalidation
overlaps the front (but not all) of a dirty write cached in a streaming
write page (dirty, but not uptodate, with the dirty region tracked by a
netfs_folio struct), the function modifies the dirty region - but
incorrectly as it moves the region forward by setting the start to the
start, not the end, of the invalidation region.
Fix this by setting finfo->dirty_offset to the end of the invalidation
region (iend). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Fix phys BO pread/pwrite with offset
sg_page() returns struct page pointer not (void *) so the scaling
of pread/pwrite is wrong for phys BO and wrong parts of BO would be
accessed if non-zero offset is used.
Last impacted platform with overlay or cursor planes using phys
mapping was Gen3/945G/Lakeport.
(cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6) |
| mtr is vulnerable to Out-of-bound read vulnerability in ipinfo_lookup() function. An attacker who can influence the TXT response used for AS lookups can trigger this bug by returning a DNS response that is larger than 512 bytes and uses a crafted compression pointer in the answer NAME field. ipinfo_lookup() function uses the length of the response as the end-of-message boundary for dn_expand() function. The result is a reliable crash.
This issue exists in the mtr through version 0.96 and it was fixed in commit 48e1794414d338ce47abc0f27c25ade8788af9c3. |
| A web page that contains unusual GPU shader code is loaded into the GPU compiler process and can trigger a write out-of-bounds write crash in the GPU shader compiler library. On certain platforms, when the compiler process has system privileges this could enable further exploits on the device.
An edge case using a very small value in GPU shader code can cause a segmentation fault in the GPU shader compiler due to am out-of-bounds write. |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: cbb: Fix cross-fabric target timeout lookup
When a fabric receives an error interrupt, the error may have
occurred on a different fabric. The target timeout lookup was using
the wrong base address (cbb->regs) with offsets from a different
fabric's target map, causing a kernel page fault.
Unable to handle kernel paging request at virtual address ffff80000954cc00
pc : tegra234_cbb_get_tmo_slv+0xc/0x28
Call trace:
tegra234_cbb_get_tmo_slv+0xc/0x28
print_err_notifier+0x6c0/0x7d0
tegra234_cbb_isr+0xe4/0x1b4
Add tegra234_cbb_get_fabric() to look up the correct fabric device
using fab_id, and use its base address for accessing target timeout
registers. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent lockup in requeue-PI during signal/ timeout wakeup
During wait-requeue-pi (task A) and requeue-PI (task B) the following
race can happen:
Task A Task B
futex_wait_requeue_pi()
futex_setup_timer()
futex_do_wait()
futex_requeue()
CLASS(hb, hb1)(&key1);
CLASS(hb, hb2)(&key2);
*timeout*
futex_requeue_pi_wakeup_sync()
requeue_state = Q_REQUEUE_PI_IGNORE
*blocks on hb->lock*
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
Q_REQUEUE_PI_IGNORE => -EAGAIN
double_unlock_hb(hb1, hb2)
*retry*
Task B acquires both hb locks and attempts to acquire the PI-lock of the
top most waiter (task B). Task A is leaving early due to a signal/
timeout and started removing itself from the queue. It updates its
requeue_state but can not remove it from the list because this requires
the hb lock which is owned by task B.
Usually task A is able to swoop the lock after task B unlocked it.
However if task B is of higher priority then task A may not be able to
wake up in time and acquire the lock before task B gets it again.
Especially on a UP system where A is never scheduled.
As a result task A blocks on the lock and task B busy loops, trying to
make progress but live locks the system instead. Tragic.
This can be fixed by removing the top most waiter from the list in this
case. This allows task B to grab the next top waiter (if any) in the
next iteration and make progress.
Remove the top most waiter if futex_requeue_pi_prepare() fails.
Let the waiter conditionally remove itself from the list in
handle_early_requeue_pi_wakeup(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: ah: account for ESN high bits in async callbacks
AH allocates its temporary auth/ICV layout differently when ESN is enabled:
the async ahash setup appends a 4-byte seqhi slot before the ICV or
auth_data area, but the async completion callbacks still reconstruct the
temporary layout as if seqhi were absent.
With an async AH implementation selected, that makes AH copy or compare
the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH
with ESN and forced async hmac(sha1), ping fails with 100% packet loss,
and the callback logs show the pre-fix drift:
ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24
ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36
Reconstruct the callback-side layout the same way the setup path built it
by skipping the ESN seqhi slot before locating the saved auth_data or ICV.
Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV
computation, so the async callbacks must account for the seqhi slot.
Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows
the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24
expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o
build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the
change has not been tested against a real async hardware AH engine. |
| Memory safety bug fixed in Firefox 152. This vulnerability was fixed in Firefox 152, Firefox ESR 140.12, Firefox ESR 115.37, Thunderbird 152, and Thunderbird 140.12. |
| A vulnerability exists in the ngx_http_scgi_module and ngx_http_uwsgi_module modules that may result in excessive memory allocation or an over-read of data. When scgi_pass or uwsgi_pass is configured, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to read the memory of the NGINX worker process or restart it. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Return proper address for non-zero offsets in insn array
The map_direct_value_addr() function of the instruction
array map incorrectly adds offset to the resulting address.
This is a bug, because later the resolve_pseudo_ldimm64()
function adds the offset. Fix it. Corresponding selftests
are added in a consequent commit. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix iova-to-va conversion for MR page sizes != PAGE_SIZE
The current implementation incorrectly handles memory regions (MRs) with
page sizes different from the system PAGE_SIZE. The core issue is that
rxe_set_page() is called with mr->page_size step increments, but the
page_list stores individual struct page pointers, each representing
PAGE_SIZE of memory.
ib_sg_to_page() has ensured that when i>=1 either
a) SG[i-1].dma_end and SG[i].dma_addr are contiguous
or
b) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned.
This leads to incorrect iova-to-va conversion in scenarios:
1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K):
ibmr->iova = 0x181800
sg[0]: dma_addr=0x181800, len=0x800
sg[1]: dma_addr=0x173000, len=0x1000
Access iova = 0x181800 + 0x810 = 0x182010
Expected VA: 0x173010 (second SG, offset 0x10)
Before fix:
- index = (0x182010 >> 12) - (0x181800 >> 12) = 1
- page_offset = 0x182010 & 0xFFF = 0x10
- xarray[1] stores system page base 0x170000
- Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong)
2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K):
ibmr->iova = 0x18f800
sg[0]: dma_addr=0x18f800, len=0x800
sg[1]: dma_addr=0x170000, len=0x1000
Access iova = 0x18f800 + 0x810 = 0x190010
Expected VA: 0x170010 (second SG, offset 0x10)
Before fix:
- index = (0x190010 >> 16) - (0x18f800 >> 16) = 1
- page_offset = 0x190010 & 0xFFFF = 0x10
- xarray[1] stores system page for dma_addr 0x170000
- Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong)
Yi Zhang reported a kernel panic[1] years ago related to this defect.
Solution:
1. Replace xarray with pre-allocated rxe_mr_page array for sequential
indexing (all MR page indices are contiguous)
2. Each rxe_mr_page stores both struct page* and offset within the
system page
3. Handle MR page_size != PAGE_SIZE relationships:
- page_size > PAGE_SIZE: Split MR pages into multiple system pages
- page_size <= PAGE_SIZE: Store offset within system page
4. Add boundary checks and compatibility validation
This ensures correct iova-to-va conversion regardless of MR page size
and system PAGE_SIZE relationship, while improving performance through
array-based sequential access.
Tests on 4K and 64K PAGE_SIZE hosts:
- rdma-core/pytests
$ ./build/bin/run_tests.py --dev eth0_rxe
- blktest:
$ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd
[1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang()
The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and
readl(crtc_reg) will access with random address, because the "device" is
from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong
when my platform inserts a discrete GPU:
lspci -tv
-[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller
...
+-06.0 Loongson Technology LLC LG100 GPU
+-06.2 Loongson Technology LLC Device 7a37
...
Add a default switch case to fix the panic as below:
Kernel ade access[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4
pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0
a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002
a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001
t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000
t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0
t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8
s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000
s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000
ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210
ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1)
BADV: 7fffffffffffff00
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007
0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff
900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08
0000000000000000 0000000000000000 0000000000000006 90000001002fb778
90000001000530b8 90000000027af000 0000000000000000 9000000100054000
9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001
90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000
0000000000000006 90000000027af000 0000000000000030 90000000027af000
900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560
7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030
...
Call Trace:
[<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210
[<9000000000eebc08>] pci_fixup_device+0x108/0x280
[<9000000000ebb70c>] pci_setup_device+0x24c/0x690
[<9000000000ebc560>] pci_scan_single_device+0xe0/0x140
[<9000000000ebc684>] pci_scan_slot+0xc4/0x280
[<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0
[<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420
[<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440
[<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0
[<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<9000000000f5211c>] acpi_bus_scan+0x6c/0x280
[<900000000189c028>] acpi_scan_init+0x194/0x310
[<900000000189bc6c>] acpi_init+0xcc/0x140
[<9000000000220cdc>] do_one_initcall+0x4c/0x310
[<90000000018618fc>] kernel_init_freeable+0x258/0x2d4
[<900000000184326c>] kernel_init+0x28/0x13c
[<9000000000222008>] ret_from_kernel_thread+0xc/0xa4 |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: Work around LLVM bug when gp is used as global register variable
On MIPS, __current_thread_info is defined as global register variable
locating in $gp, and is simply assigned with new address during kernel
relocation.
This however is broken with LLVM, which always restores $gp if it finds
$gp is clobbered in any form, including when intentionally through a
global register variable. This is against GCC's documentation[1], which
requires a callee-saved register used as global register variable not to
be restored if it's clobbered.
As a result, $gp will continue to point to the unrelocated kernel after
the epilog of relocate_kernel(), leading to an early crash in init_idle,
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY
[ 0.000000] Tainted: [W]=WARN
[ 0.000000] Hardware name: loongson,loongson64v-4core-virtio
[ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240
[ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001
[ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002
[ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80
[ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80
[ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90
[ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90
[ 0.000000] Hi : 0000000000000000
[ 0.000000] Lo : 0000000000000000
[ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270
[ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270
[ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL
[ 0.000000] Cause : 00000008 (ExcCode 02)
[ 0.000000] BadVA : 0000000000000000
[ 0.000000] PrId : 00006305 (ICT Loongson-3)
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
[ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528
[ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000
[ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258
[ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98
[ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81afada8>] init_idle+0x130/0x270
[ 0.000000] [<ffffffff81afb6c0>] sched_init+0x5c8/0x6c0
[ 0.000000] [<ffffffff81ae86dc>] start_kernel+0x27c/0x7a8
This bug has been reported to LLVM[2] and affects version from (at
least) 18 to 21. Let's work around this by using inline assembly to
assign $gp before a fix is widely available. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: Fix IPv6 inner_thoff desync
In nft_inner_parse_l2l3(), when processing inner IPv6 packets,
ipv6_find_hdr() correctly computes the transport header offset
traversing all extension headers, but the result is immediately
overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only
accounts for the IPv6 base header. This creates a desync between
inner_thoff (wrong — points to extension header start) and l4proto
(correct — e.g., IPPROTO_TCP), enabling transport header forgery
and potential firewall bypass. This issue affects stable versions
from Linux 6.2.
For comparison, the normal (non-inner) IPv6 path correctly
preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite
ensures that ipv6_find_hdr()'s calculated transport header offset is
preserved, thereby fixing the desynchronization. |
| Out of bounds read and write in Media in Google Chrome on Mac prior to 149.0.7827.103 allowed a remote attacker who had compromised the renderer process to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Inappropriate implementation in SVG in Google Chrome prior to 149.0.7827.103 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
