| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| XenForo before 2.3.13 contains a refresh token replay vulnerability that allows attackers to reuse a refresh token multiple times by exploiting the failure to mark tokens as consumed when the parent access token has expired. Attackers can repeatedly submit the same refresh token to generate additional independent token pairs, achieving persistent unauthorized access for the token's full lifetime. |
| XenForo before 2.3.13 contains an OAuth2 authorization code reuse vulnerability that allows attackers to obtain unauthorized token pairs by submitting a previously used authorization code. Attackers can exploit the failure to invalidate or mark authorization codes as consumed after initial token issuance to receive an independent token pair for the same user and scopes, bypassing the single-use guarantee of the OAuth2 authorization code flow. |
| PocketMine-MP 3.x (before 3.27.0) does not implement Minecraft Bedrock protocol encryption, so the server cannot verify that a connecting client possesses the private key corresponding to its login token. An attacker who captures a valid login from another player's session (for example by tricking the player into connecting to an attacker-controlled server) can replay that login to impersonate the victim and pass XBOX Live authentication until the JWT token expires (typically 2-3 days). This affects servers directly reachable over the internet that are not behind a proxy with encryption enabled. Fixed in 4.0.0 and backported to 3.27.0. |
| Authen::SASL::Perl::DIGEST_MD5 versions before 2.2100 for Perl accept replayed authentication responses via unverified nonce in server_step.
server_start generates a fresh nonce and sends it in the challenge, and nothing later compares that value against the nonce the client returns. server_step derives the expected digest from the client's own parameters, so a response verifies whenever its digest matches the nonce it carries. The count table it also checks is keyed on the client-supplied nonce and starts empty in each new server object, so a captured first response, carrying `nc=00000001`, passes that too. RFC 2831 defines the nonce in the response as the value the server sent in the preceding challenge.
An attacker who observes one successful `qop=auth` exchange can replay the captured response against a later session for the same service, host, realm and user, and authenticate as that user without knowing the password. |
| Wss4jSecurityInterceptor did not consistently wire Apache WSS4J ReplayCache instances into RequestData for validation-time checks. As a result, protections against replay of UsernameToken nonces and creation timestamps, Timestamp elements, and certain SAML one-time-use semantics could be ineffective even when operators configured a replay cache on the interceptor.
Affected versions:
Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8. |
| A flaw was found in Rancher Manager. The SAML assertion replay protection introduced by the fix for CVE-2026-44946 recorded consumed assertion IDs in a per-process cache, so each replica only detected replays that reached the same pod. In a high-availability deployment, an attacker holding a captured assertion could replay it once against every other replica to obtain additional authenticated sessions as the victim.
This issue affects Rancher: before 2.15.1. |
| Filament is a collection of full-stack components for accelerated Laravel development. From 4.0.0 until 4.12.6 and 5.7.6, packages/panels/src/Auth/MultiFactor/App/AppAuthentication.php uses AppAuthentication::verifyCode() with a used-code cache key derived from both the app authentication secret and the submitted TOTP code. This isolates the newest accepted timestep by code instead of by secret, allowing a previously issued app-based MFA code to be accepted after a newer code has already been used. Reuse of the exact same code was already prevented, but another code inside the accepted time window remained usable. An attacker who obtains the target account's password and one app-based MFA code can use that code for the remainder of the configured window, which is approximately four minutes with the default settings, even after the legitimate account holder logs in with a newer code. Email-based MFA is not affected. This issue is fixed in versions 4.12.6 and 5.7.6. |
| When SAML IdP-initiated login is enabled in Grafana Enterprise, the SAML library skips validation of the InResponseTo field on all SAML responses, including SP-initiated logins. This removes anti-replay protection, allowing an attacker who obtains a valid signed SAML assertion to replay it and gain a session as the victim user. Only instances with the allow_idp_initiated SAML setting enabled are affected; this setting is off by default and Grafana OSS is not affected. |
| Open edX Platform enables the authoring and delivery of online learning at any scale. Prior to commit 3a5ac85, a security vulnerability has been identified in the Open edX LMS platform's LTI (Learning Tools Interoperability) Provider implementation. The validate_timestamp_and_nonce function in lms/djangoapps/lti_provider/signature_validator.py does not validate OAuth nonces or timestamps, allowing an attacker who captures a valid LTI launch request to replay it an unlimited number of times without detection. This issue has been patched via commit 3a5ac85. |
| Authentication bypass by capture-replay in Microsoft Exchange Server allows an authorized attacker to elevate privileges over a network. |
| Zephyr's WireGuard VPN data-plane receive handler wg_process_data_message() in subsys/net/lib/wireguard/wg_crypto.c validated the anti-replay counter too late. After AEAD decryption of a MESSAGE_TRANSPORT_DATA packet succeeded, the code committed several peer-state changes — update_peer_addr() (endpoint roaming update), the keypair->last_rx/peer->last_rx liveness timers, and keypair_update() (promote next→current and destroy the previous keypair) — and only afterward called wg_check_replay(). On a replayed packet the replay check returned -EINVAL, but none of the preceding mutations were rolled back.
The AEAD tag authenticates content but not freshness, so a replayed-but-authentic transport packet decrypts correctly. An attacker who captures one valid ciphertext off the wire (an on-path or shared-medium observer) can re-inject it from an arbitrary spoofed source address. Reaching the handler requires no credentials: it is driven directly from inbound UDP datagrams via the dispatch in subsys/net/lib/wireguard/wg.c.
Because the state mutations committed before the replay check, the replay repoints the peer endpoint to the attacker-chosen source address (roaming hijack), redirecting the victim's subsequent outbound tunnel traffic until the legitimate peer's next packet re-corrects it; it also prematurely destroys the previous keypair and refreshes the RX liveness timer. The tunnel payload stays encrypted under the session keypair, so this is an integrity/availability impact (traffic redirection and session disruption), not payload disclosure. The fix moves wg_check_replay() to immediately after a successful decrypt, before any peer-state mutation, matching the WireGuard specification and the Linux reference implementation. |
| Unauthenticated Other Vulnerability Type in Forminator <= 1.57.1 versions. |
| Rodauth before 2.47.0 contains a time-based one-time password reuse vulnerability in the otp feature that fails to track the last accepted code timestamp. Attackers who observe a valid TOTP code can replay it during the drift window to bypass the second authentication factor. |
| An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via the SPC Connect Pro software accepts replayed application-layer payloads injected into an active TCP session. |
| An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via spoofed TCP FIN packets without validating the sequence or acknowledgment numbers. |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Through 1.5.0, the validity store uses a strict lower-bound comparison that expires a stored transaction too early relative to Transaction::is_valid_at, allowing a remote attacker to replay the same signed transaction during a blocks_per_batch minus one block window and cause the sender and recipient balances to be updated twice. This issue is fixed in version 1.5.1. |
| Authentication Bypass by Capture-replay vulnerability in Apache Tomcat's DIGEST authenticator. If, before windowSize requests have been made, a client makes a DIGEST
authenticated request with a nonceCount on the upper boundary of the
replay window then that request is replayable once only while the
associated nonceCount remains within the replay window.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.30 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| Authentication Bypass by Capture-replay vulnerability in Spring Spring Security allows Spring Security's DPoPProofJwtDecoderFactory contains a cache-based replay attack vulnerability. The internal cache storing JWT ID claims has a strict size limit, allowing attackers to evict legitimate entries by flooding the server with dummy requests, then replay intercepted valid DPoP proofs.
This issue affects Spring Security: 7.1.0, from 7.0.0 through 7.0.6, and from 6.5.0 through 6.5.11. |
| Etherpad is a real-time collaborative editor. From 2.6.0 until 3.1.0, Etherpad's src/node/hooks/express/tokenTransfer.ts uses POST /tokenTransfer to store an author token for transfer between browsers and exposes it through GET /tokenTransfer/{uuid}. Although the record includes createdAt, the transfer has no expiration check, is not removed after successful redemption, and is returned by res.send(tokenData), including the raw author token. An unauthenticated attacker who obtains a transfer UUID can repeatedly redeem it, receive fresh author cookies, read the cleartext token, and impersonate the originating author for pad read and write operations. This issue is fixed in version 3.1.0. |
| Authentication Bypass by Capture-replay vulnerability in dropbox samly allows an attacker to authenticate as the subject of a captured SAML assertion by resubmitting it.
Samly.Helper.decode_idp_auth_resp/3 in lib/samly/helper.ex calls esaml_sp:validate_assertion/2, whose default duplicate detector is a no-op. The /3 arity accepting a DuplicateFun exists in esaml and implements the check, but Samly never calls it and offers no configuration to supply one, so the SAML 2.0 Web Browser SSO Profile requirement that a bearer assertion be used once is unenforced. An attacker holding a valid SAMLResponse obtained from the network, from browser history, or from logs can submit the identical bytes repeatedly until the assertion's NotOnOrAfter passes, each time establishing a session as the assertion's subject.
This issue affects samly: from 0.3.0 onward. |
