| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to command execution. |
| A buffer overflow in the SBC_DecodeFrames() function of Bestechnic Co., Ltd BES2300 Bluetooth Audio SoC firmware v3.x and earlier and fixed in v.5.0 allows attackers to cause a Denial of Service (DoS) via sending a crafted frame. |
| A Deserialization of Untrusted Data vulnerability in Ivanti Neurons for ITSM before 2026.2 allows a remote unauthenticated attacker to execute arbitrary code on the server. |
| A Deserialization of Untrusted Data vulnerability in Ivanti Neurons for ITSM before 2026.2 allows a remote unauthenticated attacker to execute arbitrary code on the server. |
| A Deserialization of Untrusted Data vulnerability in Ivanti Neurons for ITSM before 2026.2 allows a remote authenticated attacker to execute arbitrary code on the server. |
| A Missing Authorization vulnerability in Ivanti Neurons for ITSM before 2026.2 allows a remote authenticated attacker to execute arbitrary code on the server. |
| A Missing Authorization vulnerability in Ivanti Neurons for ITSM before 2026.2 allows a remote authenticated attacker to execute arbitrary code on the server. |
| A Deserialization of Untrusted Data vulnerability in Ivanti Neurons for ITSM before 2026.2 allows a remote authenticated attacker to execute arbitrary code on the server. |
| A Deserialization of Untrusted Data vulnerability in Ivanti Neurons for ITSM before 2026.2 allows a remote authenticated attacker to execute arbitrary code on the server. |
| The `vtoken-minting` and `slpx` pallets in Bifrost contain an improper authorization vulnerability in channel commission attribution. A signed account can supply an arbitrary registered `channel_id` when minting tokens without verifying that the caller is authorized to mint on behalf of that channel. This allows an attacker to inflate a channel's recorded mint volume and cause protocol commission payments to be disproportionately distributed to that channel during commission settlement. |
| Zabbix API and Frontend login lockout mechanism has a flaw where several unsuccessful login requests are not properly counted towards the block counter if sent simultaneously, potentially allowing for more password guesses than intended. |
| Use After Free vulnerability in Arm Ltd Bifrost GPU Kernel Driver, Arm Ltd Valhall GPU Kernel Driver, Arm Ltd Arm 5th Gen GPU Architecture Kernel Driver allows a local non-privileged user process to perform valid GPU memory processing operations to access already freed memory.
This issue affects Bifrost GPU Kernel Driver: from r41p0 through r49p5, from r50p0 through r51p0, from r54p1 through r54p2; Valhall GPU Kernel Driver: from r41p0 through r49p5, from r50p0 through r54p3, r55p0; Arm 5th Gen GPU Architecture Kernel Driver: from r41p0 through r49p5, from r50p0 through r54p3, r55p0. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference
via get_pid() and stores it in timer.it.cpu.pid. If the subsequent
posix_cpu_timer_set() call fails, the function returns immediately
without calling posix_cpu_timer_del() to release the pid reference,
causing a leak.
Fix it by calling posix_cpu_timer_del() before the unlock-and-return
on the error path, consistent with the other exit paths in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs()
When a container exits, the following BUG_ON() is occasionally triggered:
==================================================================
VFS: Busy inodes after unmount of sdb (ext4)
------------[ cut here ]------------
kernel BUG at fs/super.c:695!
CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1
pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : generic_shutdown_super+0xf0/0x100
lr : generic_shutdown_super+0xf0/0x100
Call trace:
generic_shutdown_super+0xf0/0x100
kill_block_super+0x20/0x48
ext4_kill_sb+0x28/0x60
deactivate_locked_super+0x54/0x130
deactivate_super+0x84/0xa0
cleanup_mnt+0xa4/0x140
__cleanup_mnt+0x18/0x28
task_work_run+0x78/0xe0
do_notify_resume+0x204/0x240
==================================================================
The root cause is a race between cgroup_writeback_umount() and
inode_switch_wbs()/cleanup_offline_cgwb(). There is a window between
inode_prepare_wbs_switch() returning true and the subsequent
wb_queue_isw() call. Following is the process that triggers the issue:
CPU A (umount) | CPU B (writeback)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
inode_switch_wbs/cleanup_offline_cgwb
atomic_inc(&isw_nr_in_flight)
inode_prepare_wbs_switch
-> passes SB_ACTIVE check
__iget(inode)
generic_shutdown_super
sb->s_flags &= ~SB_ACTIVE
cgroup_writeback_umount(sb)
smp_mb()
atomic_read(&isw_nr_in_flight)
rcu_barrier()
-> no pending RCU callbacks
flush_workqueue(isw_wq)
-> nothing queued, returns
evict_inodes(sb)
-> Inode skipped as isw still holds a ref.
sop->put_super(sb)
/* destroys percpu counters */
-> VFS: Busy inodes after unmount!
wb_queue_isw()
queue_work(isw_wq, ...)
/* later in work function */
inode_switch_wbs_work_fn
process_inode_switch_wbs
iput() -> evict
percpu_counter_dec() // UAF!
Fix this by extending the RCU read-side critical section in
inode_switch_wbs() and cleanup_offline_cgwb() to cover from
inode_prepare_wbs_switch() through wb_queue_isw(). Since there is
no sleep in this window, rcu_read_lock() can be used. Then add a
synchronize_rcu() in cgroup_writeback_umount() before the existing
rcu_barrier(), so that all in-flight switchers that have passed the
SB_ACTIVE check have completed queue_work() before flush_workqueue()
is called.
The existing rcu_barrier() is intentionally retained so this fix can
be backported unchanged to stable kernels (5.10.y, 6.6.y, ...) that
still queue switches via queue_rcu_work(). It is a no-op on current
mainline (since commit e1b849cfa6b6 ("writeback: Avoid contention on
wb->list_lock when switching inodes")) and is removed in a follow-up
patch. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Fix hotplug-suspend race during reboot
During system reboot, cpufreq_suspend() is called via the
kernel_restart() -> device_shutdown() path. Unlike the normal system
suspend path, the reboot path does not call freeze_processes(), so
userspace processes and kernel threads remain active.
This allows CPU hotplug operations to run concurrently with
cpufreq_suspend(). The original code has no synchronization with CPU
hotplug, leading to a race condition where governor_data can be freed
by the hotplug path while cpufreq_suspend() is still accessing it,
resulting in a null pointer dereference:
Unable to handle kernel NULL pointer dereference
Call Trace:
do_kernel_fault+0x28/0x3c
cpufreq_suspend+0xdc/0x160
device_shutdown+0x18/0x200
kernel_restart+0x40/0x80
arm64_sys_reboot+0x1b0/0x200
Fix this by adding cpus_read_lock()/cpus_read_unlock() to
cpufreq_suspend() to block CPU hotplug operations while suspend is in
progress.
[ rjw: Changelog edits ] |
| L-ONE v1.0.0 was discovered to contain multiple SQL injection vulnerabilities in the /attachment/getBusinessUploadList component via the busid, id, and taskid parameters. This vulnerability allows attackers to access sensitive database information via a crafted SQL statement. |
| The Masteriyo LMS plugin for WordPress is vulnerable to unauthorized data deletion due to a missing capability check on the 'delete_item_permissions_check' function in the CourseProgressItemsController in all versions up to, and including, 2.2.0. This makes it possible for unauthenticated attackers to delete arbitrary course progress records belonging to any student. |
| Affected versions of MISP permit unauthenticated or weakly constrained request paths to perform persistent work without adequate input bounds or rate limiting.
The users/forgot password-reset endpoint accepted an attacker-controlled email value without first imposing a reasonable length bound or validating its format. That value was then used to create an audit log entry and queue a password-reset job, causing the supplied value to be persisted more than once per request. The commit explicitly states that an unbounded unauthenticated request field was stored twice per call with no throttle.
The fix adds:
*
a maximum email input length of 1024 bytes;
*
email-format validation before persistent work;
*
a per-source pre-authentication request budget;
*
HTTP 429 responses when that budget is exceeded;
*
a 15-minute cooldown for API-access request emails;
*
POST-only handling and CSRF protection for the API-access request endpoint.
The new flood filter is specifically intended to limit persistent storage costs from anonymous requests such as password resets, registrations, and failed REST authentication attempts.
Version affected: ≤2.5.45 |
| Affected versions of MISP allow authenticated users to retrieve object-reference records by UUID through EventGraphTool::get_reference_data() without first checking whether the requester is authorized to view the object the reference belongs to.
The vulnerable code queried ObjectReference.uuid directly and returned the matching row whenever it existed. Because no parent-object ACL was applied, a user who knew or obtained a reference UUID could retrieve information associated with an object outside their normal access scope. The commit explicitly states that any object reference could be returned by UUID without authorizing its parent object.
The fix retrieves the referenced object's object_id and calls fetchObjectSimple() with the current user. If the user cannot access that parent object, MISP now returns NotFoundException instead of exposing the reference.
Version affected: ≤2.5.45 |
