| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A prior update that raised a bundled HTTP client library to a version remediating known vulnerabilities was later reverted, reintroducing the earlier, vulnerable version into a log-processing component. The only code path in that component using the library issues a request to a single fixed, trusted vendor URL at initialization and does not process attacker-controlled input through the library, limiting practical exploitability of the reintroduced version in this context. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reject out-of-range useconds in NFSv2 SETATTR/CREATE
The NFSv2 sattr decoder converts the wire useconds to nanoseconds in
svcxdr_decode_sattr():
iap->ia_atime.tv_nsec = tmp2 * NSEC_PER_USEC;
tmp2 is a u32 and NSEC_PER_USEC is 1000, so the product is computed in
unsigned long. On ILP32 that is 32 bits, and an out-of-range useconds
value such as 4294968 wraps to tv_nsec == 704. The corruption therefore
happens during decode, before any proc function can inspect the value,
and a later range check on tv_nsec would see an in-range result and
accept it. Rejecting in the decoder yields an RPC GARBAGE_ARGS reply.
NFSv2 defines no NFSERR_INVAL, so there is no NFS-level status to return
for a malformed time argument, and the check cannot move to the proc
function the way the v3/v4 nsec range checks do.
Guard the raw useconds before the multiplication and reject values
greater than 1000000. useconds == 1000000 is kept: it is the Sun
convention for "set to the current server time", and the in-tree Linux
NFSv2 client emits it in both the atime and the mtime field for a plain
touch / utimes(file, NULL) (see encode_sattr() and
xdr_encode_current_server_time() in fs/nfs/nfs2xdr.c). Rejecting 1000000
would turn that common operation into a hard decode failure for both
SETATTR and CREATE. 1000000 * NSEC_PER_USEC is 10^9, which does not wrap
on ILP32, so the Sun convention value passes through safely. Only
genuinely out-of-range values (> 1000000) are rejected. The atime and
mtime guards are therefore symmetric.
The decoder only applied the Sun convention in the mtime block, which
clears ATTR_ATIME_SET|ATTR_MTIME_SET when mtime useconds == 1000000. If a
client puts 1000000 in the atime field but not in the mtime field, the
atime block stored an out-of-range tv_nsec (10^9) and left ATTR_ATIME_SET
set, so the bogus value reached the filesystem. Apply the convention in
the atime block as well, clearing ATTR_ATIME_SET so the server uses its
current time and ignores the value. Only ATTR_ATIME_SET is cleared there.
The mtime block keeps its existing behavior, where 1000000 means "set
both atime and mtime to now".
[ cel: various tweaks, addenda, and clean-ups ] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: don't free session slots that are still in use
nfsd4_sequence() can free the very slot it is currently processing.
When the session shrinker has reduced se_target_maxslots below
se_fchannel.maxreqs, the shrink path checks three conditions before
calling free_session_slots():
1. se_target_maxslots < maxreqs (shrink was advertised)
2. slot->sl_generation == se_slot_gen (slot is up-to-date)
3. seq->maxslots <= se_target_maxslots (client acknowledges)
However, seq->slotid is never checked against se_target_maxslots.
A client using a slot in the range [se_target_maxslots, maxreqs) can
satisfy all three conditions: its slot has the current generation
(set by a prior SEQUENCE), and it sends sa_highest_slotid <=
se_target_maxslots to acknowledge the reduction.
free_session_slots() then kfrees every slot at index >=
se_target_maxslots, including the caller's own slot. The function
continues to write sl_seqid, sl_flags, sl_generation, and stores the
dangling pointer in cstate->slot. Later, nfsd4_store_cache_entry()
copies up to maxresp_cached bytes of the compound reply into the freed
sl_data[] array, corrupting whatever slab object now occupies that
address.
Additionally, a concurrent thread processing SEQUENCE on a different
high-numbered slot can have its slot freed out from under it.
NFSD4_SLOT_INUSE is set under nn->client_lock before the lock is
released, so any concurrent thread past SEQUENCE will have its slot
marked. However, free_session_slots() does not check NFSD4_SLOT_INUSE
before freeing.
Fix both problems by:
1. Checking that the current request's slotid is below the shrink
boundary.
2. Scanning slots in the to-be-freed range for NFSD4_SLOT_INUSE and
deferring the shrink if any are active. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown
After a DESTROY_SESSION the per-session teardown path can free a
session while rpciod still holds an inflight callback rpc_task that
dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes
cl_callback_wq, but once nfsd4_run_cb_work() has called
rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue
does not wait for it. rpc_shutdown_client() does drain rpciod tasks,
but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay()
(e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain.
destroy path rpciod
------------ ------
unhash_session(ses)
nfsd4_probe_callback_sync(clp)
flush_workqueue(cl_callback_wq)
/* returns; rpc_task still live */
nfsd4_put_session_locked(ses)
free_session(ses) -> kfree(ses)
nfsd4_cb_sequence_done()
reads cb_clp->cl_cb_session
/* freed slab */
A second window exists in nfsd4_process_cb_update(). When
__nfsd4_find_backchannel() returns NULL because unhash_session() has
already removed the destroyed session from cl_sessions,
setup_callback_client() takes the v4.1 early return so
clp->cl_cb_session = ses never fires and the field retains a pointer
to the about-to-be-freed session.
Fix both by converting cl_cb_session to an RCU-protected pointer:
- Move the cl_cb_session = ses assignment in setup_callback_client()
to after rpc_create() succeeds, so it is only published when a
working backchannel exists. Clear cl_cb_session on the error
return in nfsd4_process_cb_update(). Both stores use
rcu_assign_pointer().
- Annotate cl_cb_session with __rcu. All rpciod-side readers use
rcu_read_lock()/rcu_dereference() and check for NULL, bailing to
the appropriate error or requeue path:
encode_cb_sequence4args(), decode_cb_sequence4resok(),
nfsd41_cb_get_slot(), nfsd41_cb_release_slot(),
nfsd4_cb_prepare(), and nfsd4_cb_sequence_done().
- Switch __free_session() from kfree() to kfree_rcu() so the
session slab is not reclaimed until after an RCU grace period,
guaranteeing that rpciod readers inside rcu_read_lock() never
dereference freed memory.
- Pass the session pointer to the nfsd_cb_seq_status and
nfsd_cb_free_slot tracepoints instead of having them re-read
cl_cb_session.
- nfsd4_cb_prepare() calls rpc_exit() when the session is NULL,
routing through the done/release path to requeue the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: fix ref leak on nfs_uuid_add_file failure
When nfs_uuid_add_file() races with nfs_uuid_put() tearing down
uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via
rcu_assign_pointer(). nfs_open_local_fh() then enters its error
branch and only releases the slot's file ref and its paired net
ref plus its own entry-time net ref, while the close path is a
no-op:
nfs_close_local_fh()
nfs_uuid = rcu_dereference(nfl->nfs_uuid);
if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */
nfsd_open_local_fh() returns localio holding a caller-owned +1
nfsd_file reference (from nfsd_file_get() after
nfsd_file_acquire_local()) and an entry-time nfsd_net reference
(from its first nfsd_net_try_get()) embedded as nf->nf_net. Both
are leaked on the failure path, pinning one nfsd_file (and the
underlying struct file, dentry, inode) and one nfsd_net_ref per
occurrence, which blocks nfsd_net and netns teardown.
Fix by releasing the caller-owned file ref and its net ref through
the existing helper, using a stack-local RCU pointer so the helper
can xchg it out, then returning -ENXIO so callers do not
dereference a localio whose slot has been cleared:
struct nfsd_file __rcu *tmp = RCU_INITIALIZER(localio);
nfs_to_nfsd_file_put_local(pnf);
nfs_to_nfsd_file_put_local(&tmp);
localio = ERR_PTR(-ENXIO);
The trailing nfs_to_nfsd_net_put(net) continues to release the
outer net ref, so all three nfsd_net_try_get() increments are
balanced on the error branch. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix uninitialized local_id in syncookie MP_JOIN reconstruction
mptcp_token_join_cookie_init_state() restores remote_nonce, local_nonce,
backup, join_id, token and msk from the saved cookie entry when rebuilding
the request socket for a MP_JOIN 4th-ACK handled under SYN cookies, but it
does not restore local_id, even though the SYN path saved it.
subflow_ulp_clone() then reads that uninitialized field and stores it as
the joined subflow's address-ID. Because the request-sock slab is
SLAB_TYPESAFE_BY_RCU and not zeroed on allocation, the value is the stale
byte of a previously freed request socket, which an off-path peer can
influence by sending concurrent MP_JOIN SYNs. This corrupts the path
manager's id-based subflow bookkeeping for the connection.
Restore subflow_req->local_id from the cookie entry, as done for the other
fields. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: GHES: fix ARM section length accounting after header
In ghes_handle_arm_hw_error(), after skipping the cper_sec_proc_arm
header with (err + 1), the remaining length was reduced by sizeof(err)
(pointer size) instead of sizeof(*err) (structure size).
That overestimates the bytes left for cper_arm_err_info records and can
let the parser read past the CPER section when err_info_num is large
enough relative to error_data_length.
Use sizeof(*err) so the length accounting matches the pointer advance
and the earlier sizeof(*err) size check. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: verify run length exceeding volume boundary
The mapping pairs decoder validates that the starting LCN is within the
volume but does not check if the run extends beyond the volume boundary.
A malformed NTFS image with a crafted mapping pairs array could cause
the kernel to access memory beyond the volume boundary, potentially leading
to memory corruption and privilege escalation.
Add validation to ensure lcn + length stays within nr_clusters. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: only rebind the reopened file's own oplock on durable reconnect
ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every
detached oplock to the reconnecting session:
list_for_each_entry_rcu(op, &ci->m_op_list, op_entry,
lockdep_is_held(&ci->m_lock)) {
if (op->conn)
continue;
op->conn = ksmbd_conn_get(fp->conn);
op->sess = work->sess;
}
The only key is op->conn == NULL, which every detached durable handle on
that inode matches, not just the one owned by fp. When two sessions hold
durable handles on the same file and both disconnect, reconnecting one of
them adopts the other session's oplock: op->sess is overwritten with the
reconnecting session without taking a reference on it, while op->conn
pins the connection.
The sibling teardown path, session_fd_check(), keys on the identity of
the connection being torn down (op->conn == conn) rather than on shared
state, and so does not have this problem.
Once the adopting session is destroyed, ksmbd_session_destroy() frees it
while the foreign oplock still points at it. The reader in
ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is
still live thanks to the reference taken above, and then dereferences the
stale session:
if (!opinfo->conn) {
up_read(&fp->f_ci->m_lock);
goto out;
}
ft = &opinfo->sess->file_table;
write_lock(&ft->lock);
BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0
Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
_raw_write_lock+0x74/0xd0
ksmbd_close_fd_app_instance_id+0x183/0x410
smb2_open+0x1346/0x4430
handle_ksmbd_work+0x2bb/0x7b0
Reached from an authenticated session against a share with the default
durable-handle and oplock configuration: two sessions open the same file
with a durable-v2 handle and an RH lease under distinct AppInstanceIds,
both log off, one reconnects with DH2C, and a later durable-v2 create
carrying the other AppInstanceId walks into the freed session.
Constrain the loop to the oplock owned by the file being reopened. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2
When a valid primary TRANSACT2 response has been received (mid->resp_buf
set, mid->multiRsp true) and a subsequent secondary response causes
cifs_check_trans2() to return false -- either because the SMB header is
invalid (malformed != 0) or because check2ndT2() rejects the PDU --
handle_mid() overwrites mid->resp_buf with the new buffer (leaking the
primary buffer) and, because mid->multiRsp is set, skips the
server->smallbuf/bigbuf NULL-out. When the user thread frees
mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the
demux thread reuses it for the next packet, resulting in a use-after-free.
Combine both early-exit conditions and, when mid->multiRsp is already
set, abort the pending transaction inline: set multiEnd, call
dequeue_mid() with malformed=true, and return true so handle_mid() exits
without touching mid->resp_buf or the server buffer pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cluster: don't sleep while holding o2hb_live_lock in o2hb_region_pin()
Patch series "ocfs2: cluster: o2hb_region_pin() fixes", v2.
This series fixes three related issues in o2hb_region_pin(), all are from
the original implementation in commit: 58a3158a5d17 ("ocfs2/cluster:
Pin/unpin o2hb regions"):
1) It is called with o2hb_live_lock (a spinlock) held, but the
underlying configfs_depend_item() sleeps (takes inode rwsem and
pins the filesystem). This triggers BUG under
CONFIG_DEBUG_ATOMIC_SLEEP.
2) When called from the configfs drop_item callback, it creates a
lock order inversion: parent inode_lock -> configfs root
inode_lock, which can deadlock against subsystem unregistration
paths taking root -> parent.
3) If pinning fails partway through o2hb_region_inc_user(), the
o2hb_dependent_users counter is leaked and partially-pinned
regions are never released, leaving heartbeat regions
unprotected on subsequent mounts.
Patch 1 reworks o2hb_region_pin() to drop o2hb_live_lock across each
sleeping configfs_depend_item() call, using a config_item reference to
keep the region alive while unlocked.
Patch 2 adds a from_callback parameter to select
configfs_depend_item_unlocked() when called from configfs context,
avoiding the inode_lock nesting.
Patch 3 fixes the error path in o2hb_region_inc_user() to unpin and
decrement the counter on failure.
This patch (of 3):
o2hb_region_pin() is always called with the o2hb_live_lock spinlock held
(from o2hb_region_inc_user() and o2hb_heartbeat_group_drop_item()), but it
calls o2nm_depend_item() -> configfs_depend_item(), which sleeps: it pins
the configfs filesystem and takes the configfs root inode rwsem. Under
CONFIG_DEBUG_ATOMIC_SLEEP this triggers:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c
in_atomic(): 1, ... name: mount.ocfs2
down_write
configfs_depend_item
o2hb_region_pin
o2hb_region_inc_user
o2hb_register_callback
dlm_register_domain_handlers
...
ocfs2_dlm_init
ocfs2_mount_volume
ocfs2_fill_super
Rework o2hb_region_pin() to pin one region at a time with the lock dropped
across the sleeping call: under o2hb_live_lock find the next eligible
region and take a config_item reference to keep it alive, drop the lock,
call o2nm_depend_item(), then retake the lock and record the pin. The
config_item_put() is done with the lock released as well, since
o2hb_region_release() also acquires o2hb_live_lock and can sleep. The
region list may change while unlocked, so the scan restarts from the top
after each pin. Local heartbeat still pins only the matching region;
global heartbeat pins all eligible regions.
The unpin path is unaffected: configfs_undepend_item() only takes a
spinlock and does not sleep. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: fix hardware header length for NBMA tunnels
ip6gre_tnl_link_config_route() accumulates the lower device's hardware
header length into dev->hard_header_len whenever header_ops is set. This
is incorrect for both users of header_ops.
ip6gretap and ip6erspan have a fixed Ethernet hardware header length.
For an NBMA ip6gre tunnel, ip6gre_header() creates only the GRE header,
the optional FOU or GUE header, and the outer IPv6 header. The lower
device header is headroom needed later, not part of the tunnel device's
hardware header.
Keep the lower device header in needed_headroom. Set hard_header_len to
the tunnel header length only for ARPHRD_IP6GRE devices with header_ops,
and leave the fixed Ethernet header length unchanged for tap and erspan
devices. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: avoid dropping live tree ref on fsnotify rule autoremove
audit_del_rule() is used for both netlink deletion templates and internal
fsnotify autoremove. The former passes a parsed template which owns a
temporary tree reference; the latter passes the installed entry itself.
The unconditional audit_put_tree() at the end of audit_del_rule() assumes
the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify
autoremove event therefore drops the installed rule's live tree reference.
Repeating this across rules sharing the same tree can free the tree while
another rule still references it, and a later autoremove dereferences the
freed pathname while comparing rules.
Move the temporary-tree put to audit_rule_change(), the caller that owns
deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both
successful deletion and -ENOENT still release the parser-owned tree.
[PM: dropped unnecessary comment for line length reasons] |
| The MemberPress Corporate Accounts plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 1.5.39. This is due to a mass assignment vulnerability in the 'add_sub_account_user' function that passes the raw 'userdata' array to 'wp_insert_user' without filtering dangerous keys like role or ID. This makes it possible for authenticated attackers, with subscriber-level access and above who hold a corporate account, to create new administrator accounts or hijack existing administrator accounts by overwriting their email addresses. The vulnerability was partially patched in version 1.5.39. |
| The Booking for Appointments and Events Calendar plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple Elementor widgets in versions up to and including 2.4.9. This is due to insufficient input sanitization and output escaping on the 'load_manually' parameter in the render() methods of classes. This makes it possible for authenticated attackers, with Contributor-level access and above who can use Elementor, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vulnerability was partially patched in version 2.4.8. |
| vLLM versions before 0.28.0 fail to validate audio sample rate headers in the transcription endpoint, allowing authenticated clients to bypass duration checks. Attackers can submit forged FLAC headers with inflated sample rates to trigger excessive memory allocation and crash the API server process affecting all tenants. |
| vLLM versions >=0.10.2 and <0.28.0 do not apply any audio decode-size or duration limit when extracting audio from video input for NanoNemotronVL models. In nano_nemotron_vl.py, _extract_audio_from_videos calls load_audio_pyav(BytesIO(video_bytes)) without the max_duration_s or max_decode_bytes parameters, so neither VLLM_MAX_AUDIO_DECODE_DURATION_S nor VLLM_MAX_AUDIO_DECODE_BYTES is enforced (unlike the direct audio upload path in AudioMediaIO). When a NanoNemotronVL model is served with use_audio_in_video=True, an attacker who supplies a small, highly compressed video as multimodal input can force the server to allocate gigabytes of memory during audio decoding, resulting in a denial of service. Fixed in vLLM 0.28.0. |
| vLLM before 0.28.0 contains a remote code execution vulnerability in the LlavaOnevision2 processor loader that ignores the trust_remote_code parameter when loading remote processor classes. Attackers can craft a malicious model with arbitrary code in processing_llava_onevision2.py that executes with vLLM process authority even when trust_remote_code is set to False. |
| WWBN AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 fails to validate playlist ownership in the Playlists_schedules/list.json.php and Live/calendar.json.php endpoints, allowing authenticated and unauthenticated users to read private playlist schedule metadata. Attackers with canStream privileges or no authentication can retrieve schedule names, descriptions, timestamps, and playlist identifiers by querying these endpoints without ownership checks. |
| WWBN AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 fails to validate playlist ownership in the video_from_program API endpoint, allowing unauthenticated access to private playlist contents. Attackers can query the API without authentication to enumerate private playlist names, owner information, and video titles including password-protected content. |
