| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Spring WebFlux applications that have Spring Security authorization rules on static resources can be bypassed under certain circumstances.
For this to impact an application, all of the following must be true:
* It must be a WebFlux application
* It must be using Spring's static resources support
* It must have a non-permitAll authorization rule applied to the static resources support |
| A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014 and classified as critical. This issue affects some unknown processing of the file /api/wizard/networkSetup of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. |
| A vulnerability was found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. It has been classified as critical. Affected is an unknown function of the file /api/wizard/getssidname of the component HTTP POST Request Handler. The manipulation leads to command injection. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. |
| quic-go is an implementation of the QUIC protocol in Go. Prior to version 0.42.0, an attacker can cause its peer to run out of memory sending a large number of `NEW_CONNECTION_ID` frames that retire old connection IDs. The receiver is supposed to respond to each retirement frame with a `RETIRE_CONNECTION_ID` frame. The attacker can prevent the receiver from sending out (the vast majority of) these `RETIRE_CONNECTION_ID` frames by collapsing the peers congestion window (by selectively acknowledging received packets) and by manipulating the peer's RTT estimate. Version 0.42.0 contains a patch for the issue. No known workarounds are available. |
| A vulnerability, which was classified as critical, has been found in H3C Magic NX15, Magic NX30 Pro, Magic NX400, Magic R3010 and Magic BE18000 up to V100R014. Affected by this issue is some unknown functionality of the file /api/esps of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. |
| A vulnerability, which was classified as critical, was found in H3C Magic NX30 Pro up to V100R007. This affects an unknown part of the file /api/wizard/getNetworkStatus of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack to succeed. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. |
| An issue in the component /internals/functions of R-fx Networks Linux Malware Detect v1.6.5 allows attackers to escalate privileges and execute arbitrary code via supplying a file that contains a crafted filename. |
| An issue was discovered in mcp-neo4j 0.3.0 allowing attackers to obtain sensitive information or execute arbitrary commands via the SSE service. NOTE: the Supplier's position is that authentication is not mandatory for MCP servers, and the mcp-neo4j MCP server is only intended for use in a local environment where authentication realistically would not be needed. Also, the Supplier provides middleware to help isolate the MCP server from external access (if needed). |
| The Evertz SDVN 3080ipx-10G is a High Bandwidth Ethernet Switching Fabric for Video Application. This device exposes a web management interface on port 80. This web management interface can be used by administrators to control product
features, setup network switching, and register license among other features. The application has been developed in PHP with the webEASY SDK, also named ‘ewb’ by Evertz.
This web interface has two endpoints that are vulnerable to arbitrary command injection (CVE-2025-4009, CVE-2025-10364) and the authentication mechanism has a flaw leading to authentication bypass (CVE-2025-10365).
CVE-2025-4009 covers the command injection in feature-transfer-import.php
CVE-2025-10364 covers the command injection in feature-transfer-export.php
Remote unauthenticated attackers can gain arbitrary command execution with elevated privileges ( root ) on affected devices.
This level of access could lead to serious business impact such as the interruption of media streaming, modification of media being streamed, alteration of closed captions being generated, among others. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. In versions on the 4.x branch prior to version 4.0.5, when parsing compact JWS or JWE input, Go JOSE could use excessive memory. The code used strings.Split(token, ".") to split JWT tokens, which is vulnerable to excessive memory consumption when processing maliciously crafted tokens with a large number of `.` characters. An attacker could exploit this by sending numerous malformed tokens, leading to memory exhaustion and a Denial of Service. Version 4.0.5 fixes this issue. As a workaround, applications could pre-validate that payloads passed to Go JOSE do not contain an excessive number of `.` characters. |
| Minder is a software supply chain security platform. Prior to version 0.0.49, the Minder REST ingester is vulnerable to a denial of service attack via an attacker-controlled REST endpoint that can crash the Minder server. The REST ingester allows users to interact with REST endpoints to fetch data for rule evaluation. When fetching data with the REST ingester, Minder sends a request to an endpoint and will use the data from the body of the response as the data to evaluate against a certain rule. If the response is sufficiently large, it can drain memory on the machine and crash the Minder server. The attacker can control the remote REST endpoints that Minder sends requests to, and they can configure the remote REST endpoints to return responses with large bodies. They would then instruct Minder to send a request to their configured endpoint that would return the large response which would crash the Minder server. Version 0.0.49 fixes this issue. |
| A security flaw has been discovered in Ruijie NBR2100G-E up to 20250919. Affected by this issue is the function listAction of the file /itbox_pi/branch_passw.php?a=list. Performing manipulation of the argument city results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited. Other parameters might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way. |
| Multiple Cisco products are affected by a vulnerability in the Ethernet Frame Decoder of the Snort detection engine that could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition.
The vulnerability is due to improper handling of error conditions when processing Ethernet frames. An attacker could exploit this vulnerability by sending malicious Ethernet frames through an affected device. A successful exploit could allow the attacker to exhaust disk space on the affected device, which could result in administrators being unable to log in to the device or the device being unable to boot up correctly.Note: Manual intervention is required to recover from this situation. Customers are advised to contact the Cisco Technical Assistance Center (TAC) to help recover a device in this condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability was found in Netcore NBR1005GPEV2, NBR200V2 and B6V2 up to 20250508 and classified as critical. This issue affects the function tools_ping of the file /usr/bin/network_tools. The manipulation of the argument url leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A denial of service (DoS) vulnerability has been identified in the JavaScript library microlight version 0.0.7. This library, used for syntax highlighting, does not limit the size of textual content it processes in HTML elements with the microlight class. When excessively large content (e.g., 100 million characters) is processed, the reset function in microlight.js consumes excessive memory and CPU resources, causing browser crashes or unresponsiveness. An attacker can exploit this vulnerability by tricking a user into visiting a malicious web page containing a microlight element with large content, resulting in a denial of service. NOTE: this is disputed by multiple parties because a large amount of memory and CPU resources is expected to be needed for content of that size. |
| thread-amount is a tool that gets the amount of threads in the current process. Prior to version 0.2.2, there are resource leaks when querying thread counts on Windows and Apple platforms. In Windows platforms, the thread_amount function calls CreateToolhelp32Snapshot but fails to close the returned HANDLE using CloseHandle. Repeated calls to this function will cause the handle count of the process to grow indefinitely, eventually leading to system instability or process termination when the handle limit is reached. In Apple platforms, the thread_amount function calls task_threads (via Mach kernel APIs) which allocates memory for the thread list. The function fails to deallocate this memory using vm_deallocate. Repeated calls will result in a steady memory leak, eventually causing the process to be killed by the OOM (Out of Memory) killer. This issue has been patched in version 0.2.2. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"
I've found that pynfs COMP6 now leaves the connection or lease in a
strange state, which causes CLOSE9 to hang indefinitely. I've dug
into it a little, but I haven't been able to root-cause it yet.
However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on
number of operations per NFSv4 COMPOUND").
Tianshuo Han also reports a potential vulnerability when decoding
an NFSv4 COMPOUND. An attacker can place an arbitrarily large op
count in the COMPOUND header, which results in:
[ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total
pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO),
nodemask=(null),cpuset=/,mems_allowed=0
when NFSD attempts to allocate the COMPOUND op array.
Let's restore the operation-per-COMPOUND limit, but increased to 200
for now. |
| gluestack-ui is a library of copy-pasteable components & patterns crafted with Tailwind CSS (NativeWind). Prior to commit e6b4271, a command injection vulnerability was discovered in the discussion-to-slack.yml GitHub Actions workflow. Untrusted discussion fields (title, body, etc.) were directly interpolated into shell commands in a run: block. An attacker could craft a malicious GitHub Discussion title or body (e.g., $(curl ...)) to execute arbitrary shell commands on the Actions runner. This issue has been fixed in commit e6b4271 where the discussion-to-slack.yml workflow was removed. Users should remove the discussion-to-slack.yml workflow if using a fork or derivative of this repository. |
| @cyanheads/git-mcp-server is an MCP server designed to interact with Git repositories. Prior to version 2.1.5, there is a command injection vulnerability caused by the unsanitized use of input parameters within a call to child_process.exec, enabling an attacker to inject arbitrary system commands. Successful exploitation can lead to remote code execution under the server process's privileges. The server constructs and executes shell commands using unvalidated user input directly within command-line strings. This introduces the possibility of shell metacharacter injection (|, >, &&, etc.). An MCP Client can be instructed to execute additional actions for example via indirect prompt injection when asked to read git logs. This issue has been patched in version 2.1.5. |
