| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Check PSC request indices against the actual size of the buffer
When processing Page State Change (PSC) requests, validate the PSC buffer
against the effective size of the scratch area, which could be less than
the maximum size if the guest provided a pointer that isn't exactly at the
start of the GHCB shared buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: xpad - fix out-of-bounds access for Share button
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix UAF in iso_recv_frame
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: do not trigger BUG() on BH disabled context
__get_vm_area_node() currently triggers a BUG() if in_interrupt() returns
true. However, in_interrupt() also reports true when BH are disabled.
The bridge code can call rhashtable_lookup_insert_fast() with bottom
halves disabled:
__vlan_add()
-> br_fdb_add_local()
spin_lock_bh(&br->hash_lock); <-- Disable BH
-> fdb_add_local()
-> fdb_create()
-> rhashtable_lookup_insert_fast()
-> kvmalloc()
-> vmalloc()
-> __get_vm_area_node()
-> BUG_ON(in_interrupt())
spin_unlock_bh(&br->hash_lock)
this triggers the BUG() despite the caller not being in NMI or
hard IRQ context.
Replace the in_interrupt() check with in_nmi() || in_hardirq(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16550: fix stack leak in trigger handler
adis16550_trigger_handler() declares the scan data array on the stack
without initializing it. The memcpy() at the bottom fills only the
first 28 bytes (TEMP + 6 channels of GYRO/ACCEL data), and
iio_push_to_buffers_with_timestamp() writes the s64 timestamp at the
8-byte-aligned offset 32. Bytes 28-31 remain uninitialized stack data
which leaks to userspace on ever trigger.
Fix this all by just zero-initializing the structure on the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
The tagged FIFO path declares iio_buff on the stack with __aligned(8)
but no initializer, but there is a hole in the structure, which will
then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be
copied, but the space between that and the timestamp are not
initialized.
Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak
issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,
but for the tagged path it only added the alignment qualifier and not
the initializer :(
Fix this by just zero-initializing the structure on the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_select_path()
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4)
to prevent deep recursion. However, when the action uses blockcast
(tcfm_blockid != 0), the function returns at the tcf_blockcast() call
BEFORE reaching the counter increment. As a result, the recursion
counter never advances and the limit check is entirely bypassed.
When two devices share a TC egress block with a mirred blockcast rule,
a packet egressing on device A is mirrored to device B via blockcast;
device B's egress TC re-enters tcf_mirred_act() via blockcast and
mirrors back to A, creating an unbounded recursion loop:
tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit
-> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat)
This recursion continues until the kernel stack overflows.
The bug is reachable from an unprivileged user via
unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant
CAP_NET_ADMIN in the new network namespace, which is sufficient to
create dummy devices, attach clsact qdiscs with shared blocks, and
install mirred blockcast filters.
BUG: TASK stack guard page was hit at ffffc90000b7fff8
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410
RIP: 0010:xas_find+0x17/0x480
Call Trace:
xa_find+0x17b/0x1d0
tcf_mirred_act+0x640/0x1060
tcf_action_exec+0x400/0x530
basic_classify+0x128/0x1d0
tcf_classify+0xd83/0x1150
tc_run+0x328/0x620
__dev_queue_xmit+0x797/0x3100
tcf_mirred_to_dev+0x7b1/0xf70
tcf_mirred_act+0x68a/0x1060
[repeating ~30+ times until stack overflow]
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by incrementing sched_mirred_nest before calling
tcf_blockcast() and decrementing it on return, mirroring the
non-blockcast path. This ensures subsequent recursive entries see the
updated counter and are correctly limited by MIRRED_NEST_LIMIT. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION
nest list with an index 'i' and writes new_profile[i++] without
bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES
entries (5), but the Netlink nest count is entirely user-controlled.
Netlink policies do not have support for constraining the number
of nested entries (or number of multi-attr entries). |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: cmis: validate start_cmd_payload_size from module
The CMIS firmware update code reads start_cmd_payload_size from
the module's FW Management Features CDB reply and uses it directly
as the byte count for memcpy. The destination buffer is 112 bytes
(ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious
module (or corrupted response) can cause a OOB write later on in
cmis_fw_update_start_download().
Let's error out. If modules that expect longer LPL writes actually
exist we should revisit.
struct cmis_cdb_start_fw_download_pl's definition has to move,
no change there. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: call ethnl_ops_complete() on module flash errors
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: refresh tcphdr after skb_ensure_writable
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc()
A race condition exists in the NFC LLCP connection state machine where
the connection acceptance packet (CC) can be processed concurrently with
socket release. This can lead to a use-after-free of the socket object.
When nfc_llcp_recv_cc() moves the socket from the connecting_sockets
list to the sockets list, it does so without holding the socket lock.
If llcp_sock_release() is executing concurrently, it might have already
unlinked the socket and dropped its references, which can result in
nfc_llcp_recv_cc() linking a freed socket into the live list.
Fix this by holding lock_sock() during the state transition and list
movement in nfc_llcp_recv_cc(). After acquiring the lock, check if
the socket is still hashed to ensure it hasn't already been unlinked
and marked for destruction by the release path. This aligns the locking
pattern with recv_hdlc() and recv_disc(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix exec_queue leak on width check in stream open
In xe_oa_stream_open_ioctl(), when param.exec_q->width > 1 the
function returns -EOPNOTSUPP directly, skipping the existing
err_exec_q cleanup path. The exec_queue reference obtained by
xe_exec_queue_lookup() is leaked.
The exec queue holds a reference on the xe_file, which is only
dropped during queue teardown. The leaked lookup ref is not on
the file's exec_queue xarray, so file close cannot release it.
This keeps both the exec queue and the file private state pinned
indefinitely.
Jump to err_exec_q instead of returning directly so the reference
is released.
(cherry picked from commit 339fa0be9e4a5d69fa47e91f4a36574224fb478f) |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: remove the software node when deactivating the aggregator
The dynamic software node we create for the aggregator platform device
when using configfs is leaked when the device is deactivated. Destroy it
as the last step in the tear-down path. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: fix a potential use-after-free
On error we free aggr->lookups->dev_id before removing the entry from
the lookup table. If a concurrent thread calls gpiod_find() before we
remove the entry, it could iterate over the list and call
gpiod_match_lookup_table() which unconditionally dereferences dev_id
when calling strcmp(). Reverse the order of cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: rework the VALID marking (again)
Recent commit changed the semantics from NOT_VALID to VALID.
I didn't realize that the flags are not stored atomically
with the entry in XArray. There's still a race of reader
observing a VALID mark for a slot, getting interrupted,
writer replacing the entry with a different one, reader
continuing, fetching the entry which is now a different
pointer than the pointer for which VALID was meant.
The biggest consequence of this is that we may see a UAF
since net_shaper_rollback() assumed that entries without
VALID can be freed without observing RCU.
Looks like the XArray marks are buying us nothing at this
point. Let's convert the code to an explicit valid field.
The smp_load_acquire() / smp_store_release() barriers are
marginally cleaner. |
| A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c.
Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue.
We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97 |
