| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: use READ_ONCE() for dev->driver in dev_has_sync_state()
dev_has_sync_state() reads dev->driver twice without holding
device_lock() -- once for the NULL check and once to dereference
->sync_state. Some callers only hold device_links_write_lock, which
doesn't prevent a concurrent unbind from clearing dev->driver via
device_unbind_cleanup().
Fix it by reading dev->driver exactly once with READ_ONCE(), pairing
with the WRITE_ONCE() in device_set_driver(). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound the look-ahead attribute-list entry in ntfs_external_attr_find()
When resolving an attribute lookup with a non-zero @lowest_vcn,
ntfs_external_attr_find() peeks at the next $ATTRIBUTE_LIST entry to
decide whether to keep searching, but bounds that not-yet-validated
entry only with "(u8 *)next_al_entry + 6 < al_end" (which proves just
bytes 0..6 are in range) and "(u8 *)next_al_entry + length <= al_end"
with an attacker-controlled, non-8-aligned length. It then reads
next_al_entry->lowest_vcn (an __le64 at offset 8) and the name at
next_al_entry->name_offset, both of which can lie past al_end -- the
exact end of the kvmalloc'd attribute-list buffer (allocated at the
on-disk attr_list_size, no rounding). A crafted on-disk $ATTRIBUTE_LIST
whose last entry sits a few bytes before al_end therefore yields a slab
out-of-bounds read when the inode is read.
Validate the look-ahead entry with ntfs_attr_list_entry_is_valid() (added
in patch 1/3) before dereferencing lowest_vcn and the name, so the same
fixed-header, length and name bounds the main attribute-list walk uses now
guard this read too. |
| In the Linux kernel, the following vulnerability has been resolved:
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_nat: reject unsupported target families
xt_nat SNAT and DNAT target handlers assume IP-family conntrack state
is present and can dereference a NULL pointer when instantiated from an
unsupported family through nft_compat. A bridge-family compat rule can
therefore trigger a NULL-dereference in nf_nat_setup_info().
Reject non-IP families in xt_nat_checkentry() so unsupported targets
cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT
compat users and leave the runtime fast path unchanged.
[ The crash was fixed via
9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"),
so this patch is no longer critical.
Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra
family check is a good idea in any case. ] |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: gw: acquire ethernet header only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - only expose sysfs attributes on control interface
When the driver was converted to use the driver core to instantiate device
attributes (via .dev_groups in the usb_driver structure), the attributes
started appearing on all interfaces bound to the driver. Since the ims-pcu
driver manually claims the secondary data interface during probe, the
driver core automatically creates the sysfs attributes for that interface
as well.
However, the driver only supports these attributes on the primary control
interface. Data interfaces lack the necessary descriptors and internal
state to handle these requests, and accessing them can lead to unexpected
behavior or crashes.
Fix this by updating the is_visible() callbacks for both the main and OFN
attribute groups to verify that the interface being accessed is indeed the
control interface. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: strip GSO state from fragments before reassembly
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and
the next software segmentation point - udp_rcv_segment() on local
delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow
path - hands it to skb_segment(). skb_segment()'s frag_list walk
assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to
a tap by an unprivileged user in its own userns are enough:
kernel BUG at net/core/skbuff.c:4899!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2
RIP: 0010:skb_segment+0x20ca/0x48b0
Call Trace:
<TASK>
__udp_gso_segment+0x29a/0x27d0
udp4_ufo_fragment+0x458/0x6c0
inet_gso_segment+0x429/0x1340
skb_mac_gso_segment+0x233/0x4f0
__skb_gso_segment+0x308/0x660
udp_queue_rcv_skb+0x440/0xad0
udp_unicast_rcv_skb+0xc7/0x2c0
udp_rcv+0x16ce/0x2260
ip_protocol_deliver_rcu+0x197/0x2d0
ip_local_deliver+0x430/0x690
ip_rcv+0x16f/0x1f0
__netif_receive_skb_one_core+0x15e/0x1c0
__netif_receive_skb+0x1e/0x110
netif_receive_skb+0xf6/0x5c0
tun_rx_batched.isra.0+0x3ab/0x790
tun_get_user+0x17c3/0x3550
tun_chr_write_iter+0xba/0x1b0
vfs_write+0x646/0x1130
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
This runs with BH disabled, so it is a panic rather than an oops. The
same is reachable with CAP_NET_RAW in a netns where a defrag point
precedes a GSO point, and from a guest whose VMM forwards
virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by
commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting
gso_size mangled skb having linear-headed frag_list") and by
commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head
alloc types") do not cover it: page-backed heads skip them, and kmalloc
heads skip them when gso_size == skb_headlen(head), which the sender
controls.
An skb entering a frag queue is an IP fragment by definition and
cannot legitimately carry GSO state: GRO does not merge fragments and
the stack segments before it fragments, so only untrusted sources are
affected. This has been reachable since
commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first
path that let userspace attach GSO metadata to an IP fragment. Reset
the GSO fields of every fragment as it is queued, in
inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and
6lowpan reassembly share; then neither the head nor the frag_list
members of the reassembled skb carry them (the members matter too:
the ip_do_fragment()/ip6_fragment() fast paths send them out as they
are). The head may remain CHECKSUM_PARTIAL; that is already accepted
on receive and resolved by skb_checksum_help() in
ip_do_fragment()/ip6_fragment() on forward.
Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer
above, two further IPv4 frag_list geometries that reach
BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6
fragment-header variant (udp6_ufo_fragment()) each panic the unpatched
kernel; with this patch all four datagrams are delivered intact and
nothing is logged. |
| The Rest Routes WordPress plugin through 5.5.5 does not sanitize and validate a value taken from the URL of one of its public REST routes before using it in a SQL query, allowing unauthenticated attackers to perform SQL injection attacks. |
| An unsafe dynamic class loading vulnerability exists in the database connection utilities of PaperCut MF and PaperCut NG. The application instantiates database driver classes based on configurable driver names without validating against an allowlist of approved drivers. If an attacker can manipulate system configuration parameters, this enables the execution of arbitrary Java bytecode residing on the application classpath under the security context of the PaperCut server process. |
| An improper access control vulnerability exists in the web management interface of PaperCut MF and PaperCut NG. Under specific conditions, unauthenticated remote requests targeting administrative functions can trigger backend actions prior to the completion of access validation checks. This allows an unauthenticated remote attacker to modify certain system configurations. |
| A weakness in the MongoDB C++ Driver's handling of caller-supplied namespace identifiers allows special characters embedded in those identifiers. An application that builds a namespace identifier from untrusted input without validating it may therefore have its operation directed at a different target than intended. This can result in limited unauthorized read and write access to data belonging to another logical tenant of the affected application. |
| A buffer overflow vulnerability in the WatchGuard Fireware OS Management Web UI allows an authenticated administrator with network access to cause a denial of service (DoS) condition or potentially execute arbitrary code by sending specially crafted network traffic. |
| ServiceNow has remediated a SQL injection vulnerability that was identified in in the ServiceNow AI platform. This vulnerability could enable an unauthenticated user, in certain circumstances, to execute arbitrary SQL statements against the instance's underlying database and gain access to, or modify, instance data beyond what was intended.
ServiceNow deployed a security update to hosted instances and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances.
We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. |
| An operator who calls JdbcMessageStore.addAllowedPatterns(...) to restrict deserialization receives no protection at all when the store is a Spring-managed bean.
Spring Integration 7.1.0
Spring Integration 7.0.0 - 7.0.5
Spring Integration 6.5.0 - 6.5.10
Spring Integration 6.4.0 - 6.4.12 |
| A vulnerability was identified in blackms aistack up to 1.6.1. Affected by this issue is some unknown functionality of the file src/web/server.ts of the component Static File Handler. Such manipulation of the argument req.url leads to path traversal. The attack can be executed remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in SourceCodester Simple Online Food Ordering System 1.0. This affects an unknown function of the file /admin/ajax.php?action=login2. The manipulation of the argument email leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| Stalwart Mail Server does not compare an OAuth redirect target against any registered destination in its default configuration. The validation routine in crates/http/src/auth/oauth/registration.rs returns success immediately when the client-authentication requirement is disabled, and that requirement is false in the shipped settings, so the supplied redirect value is neither matched against a registered client nor otherwise constrained. The value is stored with the authorization code, and the login page reads it back and sends the browser to it with the code attached. A request naming a destination the attacker controls therefore delivers a valid authorization code there once the account holder authenticates, and because the token endpoint checks only that the redirect presented at exchange matches the one recorded with the code, the same party can exchange it for access and refresh tokens and read the account's mail. |
| IDURAR ERP CRM changes the password of whichever account a request names rather than the account making the request. The update handler in backend/src/controllers/middlewaresControllers/createUserController/updatePassword.js resolves the authenticated user from the request that the token middleware populated, then issues its update against a filter built from the identifier in the URL path, and never compares the two. The route is mounted behind the administrator token check only, so any valid administrator session is sufficient, and the sole ownership-like guard in the handler rejects a single hardcoded demo address. A caller can therefore set an arbitrary password on any other administrator account and sign in as it. The read handler in the same controller directory accepts an identifier the same way, which supplies the identifiers needed to pick a target. |
| ILIAS deserialises stored session data for an unauthenticated caller. The Shibboleth back-channel endpoint at components/ILIAS/AuthShibboleth/resources/shib_logout.php runs in a context that ilInitialisation exempts from authentication, and its logout-notification handler locates the session to terminate by reading every live row of the session table and passing each row's stored data to a hand-written parser that calls unserialize without restricting which classes may be constructed. Any serialised object present in any session row is therefore instantiated on behalf of an anonymous request, and object destructors run when those objects are discarded. A serialised object can be placed into a session row without logging in, because the LTI authentication entry point stores request parameters into the session and is reachable on a path the same initialisation code exempts from authentication. A class bundled with the application writes a JSON-encoded structure to a file named by one of its own properties when it is destroyed, which places attacker-controlled content at an attacker-chosen path below the web root and results in code execution as the web server user. Versions 9.22, 10.10 and 11.3 remove the endpoint's logout-notification implementation. |
| amqp091-go is a Go AMQP 0.9.1 client. Before version 1.13.0, a compromised or malicious AMQP broker can force the client to allocate resources for and process content body frames that exceed the negotiated frame_max limit. This can lead to unexpected memory consumption or application-layer denial of service (DoS), bypassing the protocol's built-in framing constraints. Version 1.13.0 contains a fix. No known workarounds are available. |
