Export limit exceeded: 29942 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (4749 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-42627 | 1 Arm | 1 Armnn | 2026-05-26 | 6.2 Medium |
| In Arm ArmNN through 2026-03-27, an integer overflow in TensorShape::GetNumElements() in armnn/Tensor.cpp allows a crafted TFLite model file to bypass buffer size validation and trigger a heap-based buffer over-read during model optimization. The overflow occurs when multiplying tensor dimensions using 32-bit unsigned arithmetic without overflow detection, causing GetNumBytes() to return an understated allocation size. During Optimize()->InferOutputShapes(), the BatchToSpaceNdLayer reads beyond the allocated buffer. | ||||
| CVE-2026-23455 | 1 Linux | 1 Linux Kernel | 2026-05-26 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: check for zero length in DecodeQ931() In DecodeQ931(), the UserUserIE code path reads a 16-bit length from the packet, then decrements it by 1 to skip the protocol discriminator byte before passing it to DecodeH323_UserInformation(). If the encoded length is 0, the decrement wraps to -1, which is then passed as a large value to the decoder, leading to an out-of-bounds read. Add a check to ensure len is positive after the decrement. | ||||
| CVE-2026-35092 | 2 Corosync, Redhat | 10 Corosync, Enterprise Linux, Enterprise Linux Eus and 7 more | 2026-05-26 | 7.5 High |
| A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode. | ||||
| CVE-2026-4887 | 3 Gimp, Gnome, Redhat | 7 Gimp, Gimp, Enterprise Linux and 4 more | 2026-05-26 | 6.1 Medium |
| A flaw was found in GIMP. This issue is a heap buffer over-read in GIMP PCX file loader due to an off-by-one error. A remote attacker could exploit this by convincing a user to open a specially crafted PCX image. Successful exploitation could lead to out-of-bounds memory disclosure and a possible application crash, resulting in a Denial of Service (DoS). | ||||
| CVE-2026-4775 | 3 Debian, Libtiff, Redhat | 11 Debian Linux, Libtiff, Enterprise Linux and 8 more | 2026-05-26 | 7.8 High |
| A flaw was found in the libtiff library. A remote attacker could exploit a signed integer overflow vulnerability in the putcontig8bitYCbCr44tile function by providing a specially crafted TIFF file. This flaw can lead to an out-of-bounds heap write due to incorrect memory pointer calculations, potentially causing a denial of service (application crash) or arbitrary code execution. | ||||
| CVE-2026-22185 | 1 Openldap | 1 Openldap | 2026-05-25 | 6.8 Medium |
| OpenLDAP Lightning Memory-Mapped Database (LMDB) versions up to and including 0.9.14, prior to commit 8e1fda8, contain a heap buffer underflow in the readline() function of mdb_load. When processing malformed input containing an embedded NUL byte, an unsigned offset calculation can underflow and cause an out-of-bounds read of one byte before the allocated heap buffer. This can cause mdb_load to crash, leading to a limited denial-of-service condition. | ||||
| CVE-2024-41022 | 1 Linux | 1 Linux Kernel | 2026-05-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq() The "instance" variable needs to be signed for the error handling to work. | ||||
| CVE-2026-33642 | 1 Kovidgoyal | 1 Kitty | 2026-05-22 | 9.9 Critical |
| Kitty is a cross-platform GPU based terminal. In versions 0.46.2 and below, the handle_compose_command() function in kitty/graphics.c performs bounds validation on composition offsets using unsigned 32-bit arithmetic that is subject to integer wrapping, potentially leading to Heap Buffer Over-Read/Write. An attacker who can write escape sequences to a kitty terminal (e.g., via a malicious file, SSH login banner, or piped content) can supply crafted x_offset/y_offset values that pass the bounds check after wrapping but cause massive out-of-bounds heap memory access in compose_rectangles(). No user interaction is required. No non-default configuration is required. The attacker only needs the ability to produce output in a kitty terminal window. This issue has been fixed in version 0.47.0. | ||||
| CVE-2026-26134 | 1 Microsoft | 2 365 Copilot, Office | 2026-05-22 | 7.8 High |
| Integer overflow or wraparound in Microsoft Office allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-23280 | 1 Linux | 1 Linux Kernel | 2026-05-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent ubuf size overflow The ubuf size calculation may overflow, resulting in an undersized allocation and possible memory corruption. Use check_add_overflow() helpers to validate the size calculation before allocation. | ||||
| CVE-2026-8631 | 2 Hp, Hp Inc | 2 Linux Imaging And Printing, Hp Linux Imaging And Printing Software | 2026-05-21 | 9.8 Critical |
| A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software. This potential vulnerability may allow escalation of privileges and/or arbitrary code execution via an integer overflow in the hpcups processing path when handling crafted print data. | ||||
| CVE-2026-45232 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-05-21 | 3.1 Low |
| Rsync versions before 3.4.3 contain an off-by-one out-of-bounds stack write vulnerability in the establish_proxy_connection() function in socket.c that allows network attackers to corrupt stack memory by sending a malformed HTTP proxy response. Attackers can exploit this by positioning themselves between the client and proxy or controlling the proxy server to send a response line of 1023 or more bytes without a newline terminator, causing a null byte to be written to an out-of-bounds stack address when the RSYNC_PROXY environment variable is set. | ||||
| CVE-2026-43618 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-05-21 | 8.1 High |
| Rsync version 3.4.2 and prior contain an integer overflow vulnerability in the compressed-token decoder where a 32-bit signed counter is not checked for overflow, allowing a malicious sender to trigger an overflow that causes the receiver process to read and return data from outside the intended buffer bounds. Attackers can exploit this vulnerability to disclose process memory contents including environment variables, passwords, heap and stack data, and library memory pointers, significantly reducing ASLR effectiveness and facilitating further exploitation. | ||||
| CVE-2024-27304 | 2 Jackc, Redhat | 3 Pgproto3, Pgx, Advanced Cluster Security | 2026-05-21 | 9.8 Critical |
| pgx is a PostgreSQL driver and toolkit for Go. SQL injection can occur if an attacker can cause a single query or bind message to exceed 4 GB in size. An integer overflow in the calculated message size can cause the one large message to be sent as multiple messages under the attacker's control. The problem is resolved in v4.18.2 and v5.5.4. As a workaround, reject user input large enough to cause a single query or bind message to exceed 4 GB in size. | ||||
| CVE-2026-43407 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply() This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does not exceed the end address of the allocation. This patch fixes the issue by changing the data type of payload_len to u32. Additionally, the data type of result_msg_len is changed to u32, as it is also a variable holding a non-negative length. Also, an additional layer of sanity checks is introduced, ensuring that directly after reading it from the message, payload_len and result_msg_len are not greater than the overall segment length. BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph] Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262 CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x620 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x72/0x210 kasan_report+0xe7/0x130 ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] __asan_report_load_n_noabort+0xf/0x20 ceph_handle_auth_reply+0x642/0x7a0 [libceph] mon_dispatch+0x973/0x23d0 [libceph] ? apparmor_socket_recvmsg+0x6b/0xa0 ? __pfx_mon_dispatch+0x10/0x10 [libceph] ? __kasan_check_write+0x14/0x30i ? mutex_unlock+0x7f/0xd0 ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_do_recvmsg+0x10/0x10 [libceph] ceph_con_process_message+0x1f1/0x650 [libceph] process_message+0x1e/0x450 [libceph] ceph_con_v2_try_read+0x2e48/0x6c80 [libceph] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph] ? save_fpregs_to_fpstate+0xb0/0x230 ? raw_spin_rq_unlock+0x17/0xa0 ? finish_task_switch.isra.0+0x13b/0x760 ? __switch_to+0x385/0xda0 ? __kasan_check_write+0x14/0x30 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 ceph_con_workfn+0x248/0x10c0 [libceph] process_one_work+0x629/0xf80 ? __kasan_check_write+0x14/0x30 worker_thread+0x87f/0x1570 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_try_to_wake_up+0x10/0x10 ? kasan_print_address_stack_frame+0x1f7/0x280 ? __pfx_worker_thread+0x10/0x10 kthread+0x396/0x830 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? __pfx_kthread+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? recalc_sigpending+0x180/0x210 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3f7/0x610 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x385/0xda0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> [ idryomov: replace if statements with ceph_decode_need() for payload_len and result_msg_len ] | ||||
| CVE-2026-32952 | 2 Azure, Microsoft | 2 Go-ntlmssp, Go-ntlmssp | 2026-05-21 | 5.3 Medium |
| go-ntlmssp is a Go package that provides NTLM/Negotiate authentication over HTTP. Prior to version 0.1.1, a malicious NTLM challenge message can causes an slice out of bounds panic, which can crash any Go process using `ntlmssp.Negotiator` as an HTTP transport. Version 0.1.1 patches the issue. | ||||
| CVE-2026-41144 | 1 Nasa | 1 Fprime | 2026-05-21 | 0 Low |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to version 4.2.0, the bounds check byteOffset + dataSize > fileSize uses U32 addition that wraps around on overflow. An attacker-crafted DataPacket with byteOffset=0xFFFFFF9C and dataSize=100 overflows to 0, bypassing the check entirely. The subsequent file write proceeds at the original ~4GB offset. Additionally, Svc/FileUplink/File.cpp:20-31 performs no sanitization on the destination file path. Combined, these allow writing arbitrary data to any file at any offset. The impact is arbitrary file write leading to remote code execution on embedded targets. Note that this is a logic bug. ASAN does not detect it because all memory accesses are within valid buffers — the corruption occurs in file I/O. Version 4.2.0 contains a patch. No known workarounds are available. | ||||
| CVE-2026-43452 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: guard option walkers against 1-byte tail reads When the last byte of options is a non-single-byte option kind, walkers that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end of the option area. Add an explicit i == optlen - 1 check before dereferencing op[i + 1] in xt_tcpudp and xt_dccp option walkers. | ||||
| CVE-2026-43445 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: e1000/e1000e: Fix leak in DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e driver") Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver") Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()") fixed the infinite loop, but introduced the off-by-one error. This issue may still exist in the igbvf driver, but I did not address it in this patch. | ||||
| CVE-2026-6192 | 1 Uclouvain | 1 Openjpeg | 2026-05-21 | 3.3 Low |
| A vulnerability was identified in uclouvain openjpeg up to 2.5.4. This impacts the function opj_pi_initialise_encode in the library src/lib/openjp2/pi.c. The manipulation leads to integer overflow. The attack must be carried out locally. The exploit is publicly available and might be used. The identifier of the patch is 839936aa33eb8899bbbd80fda02796bb65068951. It is suggested to install a patch to address this issue. | ||||