| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Gutenberg Essential Blocks – Page Builder for Gutenberg Blocks & Patterns plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'configurablePrefix' Block Attribute in all versions up to, and including, 6.1.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.10 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an unauthenticated user to execute arbitrary JavaScript in a user's browser session due to improper path validation under certain conditions. |
| The Gravity Forms Booking plugin for WordPress is vulnerable to time-based SQL Injection via the ‘staff_id’ parameter in all versions up to, and including, 2.7.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| Authorization Bypass Through User-Controlled SQL Primary Key vulnerability in DATABASE Software Training Consulting Ltd. Databank Accreditation Software allows SQL Injection.
This issue affects Databank Accreditation Software: before 2026/04. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: fix leak if split 6 GHz scanning fails
rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's
supposed to be released at ___cfg80211_scan_done() but this doesn't happen
as rdev->scan_req is NULL at that point, too, leading to the early return
from the freeing function.
unreferenced object 0xffff8881161d0800 (size 512):
comm "wpa_supplicant", pid 379, jiffies 4294749765
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................
backtrace (crc c867fdb6):
kmemleak_alloc+0x89/0x90
__kmalloc_noprof+0x2fd/0x410
cfg80211_scan+0x133/0x730
nl80211_trigger_scan+0xc69/0x1cc0
genl_family_rcv_msg_doit+0x204/0x2f0
genl_rcv_msg+0x431/0x6b0
netlink_rcv_skb+0x143/0x3f0
genl_rcv+0x27/0x40
netlink_unicast+0x4f6/0x820
netlink_sendmsg+0x797/0xce0
__sock_sendmsg+0xc4/0x160
____sys_sendmsg+0x5e4/0x890
___sys_sendmsg+0xf8/0x180
__sys_sendmsg+0x136/0x1e0
__x64_sys_sendmsg+0x76/0xc0
x64_sys_call+0x13f0/0x17d0
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: check allocation under invalidate lock
commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in
invalidating cache blocks") added mq->lock around the destructive part of
smq_invalidate_mapping(), but left the e->allocated check outside the
critical section.
That leaves a check-then-act race. Two concurrent invalidators can both
observe e->allocated as true before either of them takes mq->lock. The
first invalidator that acquires the lock removes the entry from the
queues and hash table and then calls free_entry(), which clears
e->allocated and puts the entry back on the free list. The second
invalidator can then acquire mq->lock and continue with the stale result
of the unlocked check.
This can corrupt the SMQ queues or hash table by deleting an entry that
is no longer on those structures. It can also hit the allocation check in
free_entry() when the same entry is freed again.
Move the allocation check under mq->lock so the predicate and the
destructive operations are serialized by the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: make ebt_snat ARP rewrite writable
The ebtables SNAT target keeps the Ethernet source address rewrite
behind skb_ensure_writable(skb, 0). This is intentional: at the bridge
ebtables hooks the Ethernet header is addressed through
skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet
payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check
the payload, not the Ethernet header, and would reintroduce the small
packet regression fixed by commit 63137bc5882a.
However, the optional ARP sender hardware address rewrite is different.
It writes through skb_store_bits() at an offset relative to skb->data:
skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)
skb_header_pointer() only safely reads the ARP header; it does not make
the later sender hardware address range writable. If that range is
still held in a nonlinear skb fragment backed by a splice-imported file
page, skb_store_bits() maps the frag page and copies the new MAC address
directly into it.
Ensure the ARP SHA range is writable before reading the ARP header and
before calling skb_store_bits(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix global performance monitor reference counting
In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on
the perfmon it returns, but v3d_perfmon_set_global_ioctl() and
v3d_perfmon_delete() fail to release that reference on several paths:
1. v3d_perfmon_set_global_ioctl() leaks the reference on its error
paths.
2. CLEAR_GLOBAL leaks both the find reference and the reference
previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl
that configured it.
3. Destroying a perfmon that is the current global perfmon leaks the
reference stashed by the SET_GLOBAL ioctl.
Release each of these references explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix sk_ack_backlog leak on failed handshake
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait()
dma_fence_unwrap_for_each() internally calls dma_fence_unwrap_first()
which does cursor->chain = dma_fence_get(head), taking an extra
reference. On normal loop completion, dma_fence_unwrap_next()
releases this via dma_fence_chain_walk() -> dma_fence_put().
When virtio_gpu_do_fence_wait() fails and the function returns early
from inside the loop, the cursor->chain reference is never released.
This is the only caller in the entire kernel that does an early return
inside dma_fence_unwrap_for_each.
Add dma_fence_put(itr.chain) before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix use-after-free on sbi->sync_decompress
z_erofs_decompress_kickoff() can race with filesystem unmount, causing
a use-after-free on sbi->sync_decompress.
When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff()
to queue z_erofs_decompressqueue_work() asynchronously. Then, after all
folios are unlocked, unmount workflow can proceed and sbi will be freed
before accessing to sbi->sync_decompress.
Thread (unmount) I/O completion kworker
queue_work
z_erofs_decompressqueue_work
(all folios are unlocked)
cleanup_mnt
..
erofs_kill_sb
erofs_sb_free
kfree(sbi)
access sbi->sync_decompress // UAF!! |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds check for firmware runtime memory
Validate that the firmware runtime memory specified in the image
header is properly aligned and sized to hold the firmware image.
This prevents errors during memory allocation and image transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix a potential NPD in cleanup_prefix_route()
addrconf_get_prefix_route() can return the fib6_null_entry sentinel
entry which has a NULL fib6_table pointer. Therefore, before setting the
route's expiration time, check that we are not working with this entry,
as otherwise a NPD will be triggered [1].
Note that the other callers of addrconf_get_prefix_route() are not
susceptible to this bug:
1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF |
RTF_PREFIX_RT' flags which are not set on fib6_null_entry.
2. modify_prefix_route(): Fixed by commit a747e02430df ("ipv6: avoid
possible NULL deref in modify_prefix_route()").
3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for
fib6_null_entry and returns an error.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[...]
Call Trace:
<TASK>
__kasan_check_byte (mm/kasan/common.c:573)
lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1))
_raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1))
cleanup_prefix_route (net/ipv6/addrconf.c:1280)
ipv6_del_addr (net/ipv6/addrconf.c:1342)
inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119)
inet6_rtm_deladdr (net/ipv6/addrconf.c:4812)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6997)
netlink_rcv_skb (net/netlink/af_netlink.c:2555)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1899)
__sock_sendmsg (net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: fix resource freeing order
Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: fix generic IRQ chip leak on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe. However, on driver
remove/teardown, the generic chips are not automatically freed when the
IRQ domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on
the global gc_list and may later be visited by generic IRQ chip suspend,
resume, or shutdown callbacks after the GPIO bank has been removed,
potentially resulting in a use-after-free and kernel crash.
Fix the resource leak by explicitly calling
irq_domain_remove_generic_chips() before removing the IRQ domain in
rockchip_gpio_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL dereference in get_queue_ids()
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
(cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer dereference
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs. |
