| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Clerk helps developers build user management. Applications that use the verifyWebhook() helper to verify incoming Clerk webhooks are susceptible to accepting improperly signed webhook events. The issue was resolved in @clerk/backend 2.4.0. |
| xml-crypto is an xml digital signature and encryption library for Node.js. In affected versions the default configuration does not check authorization of the signer, it only checks the validity of the signature per section 3.2.2 of the w3 xmldsig-core-20080610 spec. As such, without additional validation steps, the default configuration allows a malicious actor to re-sign an XML document, place the certificate in a `<KeyInfo />` element, and pass `xml-crypto` default validation checks. As a result `xml-crypto` trusts by default any certificate provided via digitally signed XML document's `<KeyInfo />`. `xml-crypto` prefers to use any certificate provided via digitally signed XML document's `<KeyInfo />` even if library was configured to use specific certificate (`publicCert`) for signature verification purposes. An attacker can spoof signature verification by modifying XML document and replacing existing signature with signature generated with malicious private key (created by attacker) and by attaching that private key's certificate to `<KeyInfo />` element. This vulnerability is combination of changes introduced to `4.0.0` on pull request 301 / commit `c2b83f98` and has been addressed in version 6.0.0 with pull request 445 / commit `21201723d`. Users are advised to upgrade. Users unable to upgrade may either check the certificate extracted via `getCertFromKeyInfo` against trusted certificates before accepting the results of the validation or set `xml-crypto's getCertFromKeyInfo` to `() => undefined` forcing `xml-crypto` to use an explicitly configured `publicCert` or `privateKey` for signature verification. |
| A vulnerability was determined in Belkin AX1800 1.1.00.016. Affected by this vulnerability is an unknown functionality of the component Firmware Update Handler. This manipulation causes insufficient verification of data authenticity. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| An attacker spoofing answers to ECS enabled requests sent out by the Recursor has a chance of success higher than non-ECS enabled queries.
The updated version include various mitigations against spoofing attempts of ECS enabled queries by chaining ECS enabled requests and enforcing stricter validation of the received answers.
The most strict mitigation done when the new setting outgoing.edns_subnet_harden (old style name edns-subnet-harden) is enabled. |
| A code execution vulnerability exists in the Xiaomi shop applicationproduct. The vulnerability is caused by improper input validation and can be exploited by attackers to execute malicious code. |
| The Authorize.net Payment Gateway For WooCommerce plugin for WordPress is vulnerable to payment bypass in all versions up to, and including, 8.0. This is due to the plugin not properly verifying the authenticity of the request that updates a orders payment status. This makes it possible for unauthenticated attackers to update order payment statuses to paid bypassing any payment. |
| A vulnerability exists in the too permissive HTTP response header web server settings of the SDM600. An attacker can take advantage of this and possibly carry out privileged actions and access sensitive information. |
| A flaw was found in Red Hat Enterprise Application Platform 8. When an OIDC app that serves multiple tenants attempts to access the second tenant, it should prompt the user to log in again since the second tenant is secured with a different OIDC configuration. The underlying issue is in OidcSessionTokenStore when determining if a cached token should be used or not. This logic needs to be updated to take into account the new "provider-url" option in addition to the "realm" option.
EAP-7 does not provide the vulnerable provider-url configuration option in its OIDC implementation and is not affected by this flaw. |
| A Cross-Origin Resource Sharing (CORS) vulnerability exists in feast-dev/feast version 0.40.0. The CORS configuration on the agentscope server does not properly restrict access to only trusted origins, allowing any external domain to make requests to the API. This can bypass intended security controls and potentially expose sensitive information. |
| IPP software versions prior to v1.71 do not sufficiently verify the authenticity of data, in a
way that causes it to accept invalid data. |
| The Limit Login Attempts (Spam Protection) plugin for WordPress is vulnerable to IP Address Spoofing in versions up to, and including, 5.3. This is due to insufficient restrictions on where the IP Address information is being retrieved for request logging and login restrictions. Attackers can supply the X-Forwarded-For header with with a different IP Address that will be logged and can be used to bypass settings that may have blocked out an IP address or country from logging in. |
| CGGMP24 is a state-of-art ECDSA TSS protocol that supports 1-round signing (requires 3 preprocessing rounds), identifiable abort, and a key refresh protocol. Prior to version 0.6.3, there is a missing check in the ZK proof that enables an attack in which single malicious signer can reconstruct full private key. This issue has been patched in version 0.6.3, for full mitigation it is recommended to upgrade to cggmp24 version 0.7.0-alpha.2 as it contains more security checks. |
| An improper verification of cryptographic signature in Zscaler's SAML authentication mechanism on the server-side allowed an authentication abuse. |
| "This issue is limited to motherboards and does not affect laptops, desktop computers, or other endpoints." An insufficient validation in ASUS DriverHub may allow unauthorized sources to interact with the software's features via crafted HTTP requests.
Refer to the 'Security Update for ASUS DriverHub' section on the ASUS Security Advisory for more information. |
| Constellation is the first Confidential Kubernetes. The Constellation CVM image uses LUKS2-encrypted volumes for persistent storage. When opening an encrypted storage device, the CVM uses the libcryptsetup function crypt_activate_by_passhrase. If the VM is successful in opening the partition with the disk encryption key, it treats the volume as confidential. However, due to the unsafe handling of null keyslot algorithms in the cryptsetup 2.8.1, it is possible that the opened volume is not encrypted at all. Cryptsetup prior to version 2.8.1 does not report an error when processing LUKS2-formatted disks that use the cipher_null-ecb algorithm in the keyslot encryption field. This vulnerability is fixed in 2.24.0. |
| Plack-Middleware-Session before version 0.35 for Perl generates session ids insecurely.
The default session id generator returns a SHA-1 hash seeded with the built-in rand function, the epoch time, and the PID. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
Predicable session ids could allow an attacker to gain access to systems. |
| Laravel Reverb provides a real-time WebSocket communication backend for Laravel applications. Prior to 1.4.0, there is an issue where verification signatures for requests sent to Reverb's Pusher-compatible API were not being verified. This API is used in scenarios such as broadcasting a message from a backend service or for obtaining statistical information (such as number of connections) about a given channel. This issue only affects the Pusher-compatible API endpoints and not the WebSocket connections themselves. In order to exploit this vulnerability, the application ID which, should never be exposed, would need to be known by an attacker. This vulnerability is fixed in 1.4.0. |
| Improper fingerprint validation in the TeamViewer Client (Full & Host) prior Version 15.54 for Windows and macOS allows an attacker with administrative user rights to further elevate privileges via executable sideloading. |
