| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Hasura is an open-source product that provides users GraphQL or REST APIs. Prior to 2.49.2 and 2.45.5, a user can use a where clause on a table computed field (returning SETOF some_table) to infer row values that ought to be filtered for their role based on some_table's row-level permissions. While such rows cannot be returned directly, like predicates on strings for instance allow values to be brute forced efficiently with the where clause as an oracle. This issue is fixed in versions 2.49.2 and 2.45.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: bound device offsets in the MUX downlink decoder
mux_dl_adb_decode() walks a chain of aggregated datagram tables using
offsets and lengths taken from the modem. first_table_index,
next_table_index, table_length, datagram_index and datagram_length are
all device supplied le values. Only first_table_index was checked, and
only for being non zero. The decoder then formed adth = block +
adth_index and read the table header and the datagram entries with no
bound against the received skb. A modem that reports an index or a
length past the downlink buffer makes the decoder read out of bounds.
The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most
that, so skb->len is the real limit, but none of these in band offsets
were checked against it.
The table chain is also followed with no forward progress check. The loop
takes the next table from adth->next_table_index and stops only when that
reaches zero. A modem can stage two tables that point at each other, so
the loop never ends. It runs in softirq and clones the skb on every pass.
Validate every device offset and length against skb->len before use.
The block header must fit. Each table header, on entry and after every
next_table_index, must lie inside the skb. The datagram table must fit.
Each datagram index and length must stay inside the skb. The header
padding must not exceed the datagram length so the receive length does
not wrap. Require each next_table_index to move forward so the chain
cannot cycle.
This was reproduced under KASAN as a slab out of bounds read on a normal
downlink receive once the iosm net device is up. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked
multiq_dequeue() takes a packet from a band's child with a direct
->dequeue() call after multiq_peek() peeked it. When the child is
non-work-conserving the peek stashes the skb in the child's gso_skb, so
the direct dequeue returns a different skb and orphans the stash,
desyncing the child's qlen/backlog. With a qfq child reached through a
peeking parent (e.g. tbf) this re-enters the child on an emptied list and
dereferences NULL, panicking the kernel from softirq on ordinary egress.
Take the packet through qdisc_dequeue_peeked(), as sch_prio already does
and as sch_red and sch_sfb were just fixed to do. The helper is a no-op
when the child has no stash, so a work-conserving child is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: use sk_msg_free_partial to fix partial send
sk_msg_free_partial() ensures consistency of the skmsg at every
iteration, without having to manually handle uncharges and offsets.
This simplifies the code, and fixes some bugs in skmsg accounting when
we don't send the full contents. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipip: require CAP_NET_ADMIN in the device netns for changelink
ipip_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink
vti_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink
vti6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: preserve tc_skb_cb across defragmentation
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments(). |
| compliance-trestle is a tooling platform for managing compliance as code. Prior to versions 3.12.2 and 4.0.3, the `-o/--output` argument in `trestle author jinja` allows writing files outside the intended workspace. The application does not properly validate, `../`, `..\`, or absolute paths. This allows arbitrary file write to attacker-controlled locations. Versions 3.12.3 and 4.0.3 patch the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: modedb: fix a possible UAF in fb_find_mode()
If mode_option is NULL, it is assigned from mode_option_buf:
if (!mode_option) {
fb_get_options(NULL, &mode_option_buf);
mode_option = mode_option_buf;
}
Later, name is assigned from mode_option:
const char *name = mode_option;
However, mode_option_buf is freed before name is no longer used:
kfree(mode_option_buf);
while name is still accessed by:
if ((name_matches(db[i], name, namelen) ||
Since name aliases mode_option_buf, this may result in a
use-after-free.
Fix this by extending the lifetime of mode_option_buf until the end of the
function by using scope-based resource management for cleanup. |
| An issue was discovered in Django 5.2 before 5.2.17 and 6.0 before 6.0.8.
`django.contrib.admin.utils.display_for_field()` renders `URLField` values as clickable links in the admin without validating the URL. A value stored with an unsafe scheme is displayed as a link on changelist and read-only admin pages, which allows cross-site scripting against staff users who click the link.
Exploitation requires the unsafe value to already be stored in the database. `URLField` validation through a `ModelForm` or the admin rejects unsafe schemes, so this affects applications that persist `URLField` data without running model validation, for example through direct queryset writes, deserialization, or bulk import of untrusted input.
Django would like to thank Egor Saltykov for reporting this issue. |
| In JetBrains IntelliJ IDEA before 2026.2.1 sSRF was possible via the OpenAPI preview proxy in untrusted projects |
| In JetBrains IntelliJ IDEA before 2026.2.1 command execution via crafted Markdown preview content was possible in trusted projects |
| In JetBrains YouTrack before 2026.2.17917 unauthorised project transfer between organisations was possible |
| Semaphore versions prior to 2.18.20 contain an OS command injection (argument injection) vulnerability in the repository git_url handling that allows authenticated users holding the Manager or Owner role on any project to achieve remote code execution on the Semaphore server host. Attackers can craft a malicious git_url value using git's --upload-pack= option to inject and execute arbitrary shell commands when the server processes repository operations using the default cmd_git client. |
| MindsDB Minds Platform version 26.1.0 and earlier contains an unauthenticated remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary OS commands by submitting crafted prompts to the unprotected POST /api/v1/responses/ endpoint, which reaches the Anton agent's scratchpad tool that calls exec() on attacker-influenced Python source without sandboxing. Attackers can first configure their own LLM API key through the unauthenticated PUT /api/v1/settings/ endpoint, then POST a prompt directing the agent to invoke the scratchpad tool with arbitrary Python code, achieving full OS command execution as the user running the desktop application and enabling access to SSH keys, stored credentials, and environment secrets. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority as the reported behavior is intentional. The update process is designed to write files to disk and is restricted to the highest-privilege users working with cryptographically verified Joomla archives. |
| SiYuan kernel versions before 3.7.4 contain an improper restriction of excessive authentication attempts vulnerability in the CheckAuth() middleware. The middleware accepts the API token (Conf.Api.Token) via an Authorization header (Token/Bearer) or a ?token= query parameter, and neither path is protected by the application's CAPTCHA/lockout mechanism (NeedCaptcha/WrongAuthCount). As a result, an unauthenticated remote attacker can perform unlimited automated guesses of the API token, particularly when a short or weak custom token has been configured, and upon success gains full RoleAdministrator access enabling arbitrary file operations and SQL queries. |
| SiYuan versions before v3.7.4 fail to validate or escape table column width values, allowing stored cross-site scripting injection into style attributes. Attackers can inject malicious payloads through the setAttrViewColWidth API that break out of style attributes and inject event handlers on every table cell, executing arbitrary code in the Electron renderer with Node integration enabled. |
| MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the TelnetSSH function used for Telnet configuration that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the Telnet configuration interface to inject malicious commands and obtain root privileges on the underlying system. |
