| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Open CASCADE Technology (OCCT) V8_0_0_rc5 contains multiple vulnerabilities in its IGES and STEP file parsers that can be triggered by crafted IGES or STEP files. These issues include an out-of-bounds read in Geom2d_BSplineCurve::EvalD0 during IGES B-spline curve evaluation, an out-of-bounds read in MakeBSplineCurveCommon during STEP B-spline curve construction, and infinite recursion in StepShape_OrientedEdge::EdgeStart when processing a self-referential OrientedEdge entity. Successful exploitation may result in denial of service or unintended memory disclosure. |
| A security flaw has been discovered in janet-lang janet up to 1.41.0. This affects the function doframe of the file src/core/debug.c. Performing a manipulation results in out-of-bounds read. Attacking locally is a requirement. The exploit has been released to the public and may be used for attacks. The patch is named ed17dd2c5913a23fb1107251e44a9410a3c30cf5. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg
Check bounds against the end of the BO whenever we access the msg. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: Prevent OOB reads when parsing dec msg
Check bounds against the end of the BO whenever we access the msg. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix out-of-bounds read in symlink_data()
Since smb2_check_message() returns success without length validation for
the symlink error response, in symlink_data() it is possible for
iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer
only contains the base SMB2 header (64 bytes), accessing
err->ErrorContextCount (at offset 66) or err->ByteCount later in
symlink_data() will cause an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43legacy: enforce bounds check on firmware key index in RX path
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: clamp rx length before skb_put
virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().
Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.
The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.
Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().
Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43: enforce bounds check on firmware key index in b43_rx()
The firmware-controlled key index in b43_rx() can exceed the dev->key[]
array size (58 entries). The existing B43_WARN_ON is non-enforcing in
production builds, allowing an out-of-bounds read.
Make the B43_WARN_ON check enforcing by dropping the frame when the
firmware returns an invalid key index. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix heap over-read in ibmasm_send_i2o_message()
The ibmasm_send_i2o_message() function uses get_dot_command_size() to
compute the byte count for memcpy_toio(), but this value is derived from
user-controlled fields in the dot_command_header (command_size: u8,
data_size: u16) and is never validated against the actual allocation size.
A root user can write a small buffer with inflated header fields, causing
memcpy_toio() to read up to ~65 KB past the end of the allocation into
adjacent kernel heap, which is then forwarded to the service processor
over MMIO.
Silently clamping the copy size is not sufficient: if the header fields
claim a larger size than the buffer, the SP receives a dot command whose
own header is inconsistent with the I2O message length, which can cause
the SP to desynchronize. Reject such commands outright by returning
failure.
Validate command_size before calling get_mfa_inbound() to avoid leaking
an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware
frame from the controller's free pool, and returning without a
corresponding set_mfa_inbound() call would permanently exhaust it.
Additionally, clamp command_size to I2O_COMMAND_SIZE before the
memcpy_toio() so the MMIO write stays within the I2O message frame,
consistent with the clamping already performed by outgoing_message_size()
for the header field. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: arp_tables: fix IEEE1394 ARP payload parsing
Weiming Shi says:
"arp_packet_match() unconditionally parses the ARP payload assuming two
hardware addresses are present (source and target). However,
IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address
field, and arp_hdr_len() already accounts for this by returning a
shorter length for ARPHRD_IEEE1394 devices.
As a result, on IEEE1394 interfaces arp_packet_match() advances past a
nonexistent target hardware address and reads the wrong bytes for both
the target device address comparison and the target IP address. This
causes arptables rules to match against garbage data, leading to
incorrect filtering decisions: packets that should be accepted may be
dropped and vice versa.
The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already
handles this correctly by skipping the target hardware address for
ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()."
Mangle the original patch to always return 0 (no match) in case user
matches on the target hardware address which is never present in
IEEE1394.
Note that this returns 0 (no match) for either normal and inverse match
because matching in the target hardware address in ARPHRD_IEEE1394 has
never been supported by arptables. This is intentional, matching on the
target hardware address should never evaluate true for ARPHRD_IEEE1394.
Moreover, adjust arpt_mangle to drop the packet too as AI suggests:
In arpt_mangle, the logic assumes a standard ARP layout. Because
IEEE1394 (FireWire) omits the target hardware address, the linear
pointer arithmetic miscalculates the offset for the target IP address.
This causes mangling operations to write to the wrong location, leading
to packet corruption. To ensure safety, this patch drops packets
(NF_DROP) when mangling is requested for these fields on IEEE1394
devices, as the current implementation cannot correctly map the FireWire
ARP payload.
This omits both mangling target hardware and IP address. Even if IP
address mangling should be possible in IEEE1394, this would require
to adjust arpt_mangle offset calculation, which has never been
supported.
Based on patch from Weiming Shi <bestswngs@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: bound decode() reads against the compressed packet length
slhc_uncompress() parses a VJ-compressed TCP header by advancing a
pointer through the packet via decode() and pull16(). Neither helper
bounds-checks against isize, and decode() masks its return with
& 0xffff so it can never return the -1 that callers test for -- those
error paths are dead code.
A short compressed frame whose change byte requests optional fields
lets decode() read past the end of the packet. The over-read bytes
are folded into the cached cstate and reflected into subsequent
reconstructed packets.
Make decode() and pull16() take the packet end pointer and return -1
when exhausted. Add a bounds check before the TCP-checksum read.
The existing == -1 tests now do what they were always meant to. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec()
CO-RE accessor strings are colon-separated indices that describe a path
from a root BTF type to a target field, e.g. "0:1:2" walks through
nested struct members. bpf_core_parse_spec() parses each component with
sscanf("%d"), so negative values like -1 are silently accepted. The
subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the
upper bound and always pass for negative values because C integer
promotion converts the __u16 btf_vlen result to int, making the
comparison (int)(-1) >= (int)(N) false for any positive N.
When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff,
producing an out-of-bounds read far past the members array. A crafted
BPF program with a negative CO-RE accessor on any struct that exists in
vmlinux BTF (e.g. task_struct) crashes the kernel deterministically
during BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y
(default on major distributions). The bug is reachable with CAP_BPF:
BUG: unable to handle page fault for address: ffffed11818b6626
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full)
RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354)
RAX: 00000000ffffffff
Call Trace:
<TASK>
bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321)
bpf_core_apply (kernel/bpf/btf.c:9507)
check_core_relo (kernel/bpf/verifier.c:19475)
bpf_check (kernel/bpf/verifier.c:26031)
bpf_prog_load (kernel/bpf/syscall.c:3089)
__sys_bpf (kernel/bpf/syscall.c:6228)
</TASK>
CO-RE accessor indices are inherently non-negative (struct member index,
array element index, or enumerator index), so reject them immediately
after parsing. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix end-of-list detection in cgroup_storage_get_next_key()
list_next_entry() never returns NULL -- when the current element is the
last entry it wraps to the list head via container_of(). The subsequent
NULL check is therefore dead code and get_next_key() never returns
-ENOENT for the last element, instead reading storage->key from a bogus
pointer that aliases internal map fields and copying the result to
userspace.
Replace it with list_entry_is_head() so the function correctly returns
-ENOENT when there are no more entries. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate()
Although it is guided that `#mbox-cells` must be at least 1, there are
many instances of `#mbox-cells = <0>;` in the device tree. If that is
the case and the corresponding mailbox controller does not provide
`fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will
be used by default and out-of-bounds accesses could occur due to lack of
bounds check in that function. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath
When cifs_sanitize_prepath is called with an empty string or a string
containing only delimiters (e.g., "/"), the current logic attempts to
check *(cursor2 - 1) before cursor2 has advanced. This results in an
out-of-bounds read.
This patch adds an early exit check after stripping prepended
delimiters. If no path content remains, the function returns NULL.
The bug was identified via manual audit and verified using a
standalone test case compiled with AddressSanitizer, which
triggered a SEGV on affected inputs. |
| In the Linux kernel, the following vulnerability has been resolved:
dcache: Limit the minimal number of bucket to two
There is an OOB read problem on dentry_hashtable when user sets
'dhash_entries=1':
BUG: unable to handle page fault for address: ffff888b30b774b0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP PTI
RIP: 0010:__d_lookup+0x56/0x120
Call Trace:
d_lookup.cold+0x16/0x5d
lookup_dcache+0x27/0xf0
lookup_one_qstr_excl+0x2a/0x180
start_dirop+0x55/0xa0
simple_start_creating+0x8d/0xa0
debugfs_start_creating+0x8c/0x180
debugfs_create_dir+0x1d/0x1c0
pinctrl_init+0x6d/0x140
do_one_initcall+0x6d/0x3d0
kernel_init_freeable+0x39f/0x460
kernel_init+0x2a/0x260
There will be only one bucket in dentry_hashtable when dhash_entries is
set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then,
following process will access more than one buckets(which memory region
is not allocated) in dentry_hashtable:
d_lookup
b = d_hash(hash)
dentry_hashtable + ((u32)hashlen >> d_hash_shift)
// The C standard defines the behavior of right shift amounts
// exceeding the bit width of the operand as undefined. The
// result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen',
// so 'b' will point to an unallocated memory region.
hlist_bl_for_each_entry_rcu(b)
hlist_bl_first_rcu(head)
h->first // read OOB!
Fix it by limiting the minimal number of dentry_hashtable bucket to two,
so that 'd_hash_shift' won't exceeds the bit width of type u32. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path
smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL
and the default QUERY_INFO path. The QUERY_INFO branch clamps
qi.input_buffer_length to the server-reported OutputBufferLength and then
copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but
it never verifies that the flexible-array payload actually fits within
rsp_iov[1].iov_len.
A malicious server can return OutputBufferLength larger than the actual
QUERY_INFO response, causing copy_to_user() to walk past the response
buffer and expose adjacent kernel heap to userspace.
Guard the QUERY_INFO copy with a bounds check on the actual Buffer
payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length)
rather than an open-coded addition so the guard cannot overflow on
32-bit builds. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB reads parsing symlink error response
When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message()
returns success without any length validation, leaving the symlink
parsers as the only defense against an untrusted server.
symlink_data() walks SMB 3.1.1 error contexts with the loop test "p <
end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset
0. When the server-controlled ErrorDataLength advances p to within 1-7
bytes of end, the next iteration will read past it. When the matching
context is found, sym->SymLinkErrorTag is read at offset 4 from
p->ErrorContextData with no check that the symlink header itself fits.
smb2_parse_symlink_response() then bounds-checks the substitute name
using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from
iov_base. That value is computed as sizeof(smb2_err_rsp) +
sizeof(smb2_symlink_err_rsp), which is correct only when
ErrorContextCount == 0.
With at least one error context the symlink data sits 8 bytes deeper,
and each skipped non-matching context shifts it further by 8 +
ALIGN(ErrorDataLength, 8). The check is too short, allowing the
substitute name read to run past iov_len. The out-of-bound heap bytes
are UTF-16-decoded into the symlink target and returned to userspace via
readlink(2).
Fix this all up by making the loops test require the full context header
to fit, rejecting sym if its header runs past end, and bound the
substitute name against the actual position of sym->PathBuffer rather
than a fixed offset.
Because sub_offs and sub_len are 16bits, the pointer math will not
overflow here with the new greater-than. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: add missing netlink policy validations
Hyunwoo Kim reports out-of-bounds access in sctp and ctnetlink.
These attributes are used by the kernel without any validation.
Extend the netlink policies accordingly.
Quoting the reporter:
nlattr_to_sctp() assigns the user-supplied CTA_PROTOINFO_SCTP_STATE
value directly to ct->proto.sctp.state without checking that it is
within the valid range. [..]
and: ... with exp->dir = 100, the access at
ct->master->tuplehash[100] reads 5600 bytes past the start of a
320-byte nf_conn object, causing a slab-out-of-bounds read confirmed by
UBSAN. |
