| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: make error counter atomic
The error counter "v->corrupted_errs" was not atomic, thus it could be
subject to race conditions. The call to
dm_audit_log_target("max-corrupted-errors") may be skipped due to the
races. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: tegra: do not call pinctrl for GPIO direction
tegra_gpio_direction_input() and tegra_gpio_direction_output() already
program the GPIO controller direction registers directly. The additional
pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl
operation, because the Tegra pinmux ops provide GPIO request/free
handling but no gpio_set_direction hook.
The extra call still enters the pinctrl core and takes pctldev->mutex.
Shared GPIO users can call the direction path while holding their
per-line spinlock, so this otherwise redundant pinctrl direction call can
sleep in an atomic context.
This was found by our static analysis tool and then confirmed by manual
review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the
Tegra pinctrl ops. The reviewed path has a default non-sleeping
struct gpio_chip while the direction callback still enters the pinctrl
mutex path.
A directed runtime validation kept the same non-sleeping chip registration
and drove:
gpio_shared_proxy_direction_output()
gpiod_direction_output_raw_commit()
tegra_gpio_direction_output()
pinctrl_gpio_direction_output()
Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock
held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output()
on the stack.
Do not mark the whole chip as can_sleep to paper over this: can_sleep
describes whether get()/set() may sleep, and Tegra value access is MMIO.
Remove the redundant pinctrl direction calls and keep pinctrl involvement
in the existing request/free path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: preserve tc_skb_cb across defragmentation
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer destroy_previous_session() until after NTLM authentication
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix BQL reset on SQ re-activation
mlx5e_queue_start() deactivates and re-activates all channels but closes
only the queue being restarted. mlx5e_activate_txqsq() then
unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters
of channels that kept their in-flight TX WQEs. The next completion then
over-charges and trips the BUG_ON() in dql_completed():
kernel BUG at lib/dynamic_queue_limits.c:99!
RIP: 0010:dql_completed+0x23d/0x280
Call Trace:
<IRQ>
mlx5e_poll_tx_cq+0x668/0xa60
mlx5e_napi_poll+0x5b/0x7b0
net_rx_action+0x15a/0x580
Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc).
In the case that reset is skipped, the outstanding WQEs will eventually
complete and rebalance the dql. The dql->limit is carried across the
reset. |
| A logic issue was addressed with improved validation. This issue is fixed in macOS Sequoia 15.7.4, macOS Tahoe 26.2. An app may bypass Gatekeeper checks. |
| A cross-tenant isolation vulnerability was found in Grafana’s Correlations feature affecting legacy correlation records. Due to a backward compatibility condition allowing org_id = 0 records to be returned across organizations, a user with datasource management privileges could read and permanently delete legacy correlation data belonging to another organization. This issue affects correlations created prior to Grafana 10.2 and is fixed in >=11.6.11, >=12.0.9, >=12.1.6, and >=12.2.4.
Thanks to Gyu-hyeok Lee (g2h) for reporting this vulnerability. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.2. An app may be able to break out of its sandbox. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Restore SST-PP control to all domains
The SST-PP control offset is only restored to power domain 0 after
resume. During suspend, control values are read and stored for all
power domains.
Use pd_info->sst_base instead of power_domain_info->sst_base, which
only points to power domain 0 base address. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject non-inline dinodes with i_size and zero i_clusters
On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a
non-inline regular file with non-zero i_size and zero i_clusters is
structurally malformed: the extent map declares no allocated clusters yet
the size header claims content exists. Keep rejecting that shape, but
express it through a shared predicate so the same invariant is available
to normal inode reads and online filecheck.
The same zero-cluster shape is also malformed for non-inline directories.
ocfs2 directory growth allocates backing storage before advancing i_size,
and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches
i_size_read(inode). A forged directory dinode with a huge i_size and no
clusters would repeatedly fail on holes while advancing through the
claimed size.
Sparse regular files remain exempt: on sparse-alloc volumes, truncate can
legitimately grow i_size without allocating clusters. System inodes and
inline-data dinodes also retain their separate storage rules.
Mirror the check in ocfs2_filecheck_validate_inode_block() as well.
filecheck reports through its own error namespace, so malformed
size/cluster state is logged as a filecheck invalid-inode result rather
than via ocfs2_error(), but it must not proceed into
ocfs2_populate_inode(). |
| Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Installation and Configuration). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Hyperion Infrastructure Technology, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Infrastructure Technology. CVSS 3.1 Base Score 9.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:H). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix passing events to regulator core
Sashiko reports:
Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with
mutex") introduced a worker to batch regulator events over time using
atomic_or(). The delayed worker then passes the combined bitmask unmodified
to regulator_notifier_call_chain().
The core regulator subsystem's regulator_handle_critical() function
evaluates the event parameter using a strict switch statement. If
multiple distinct faults occur before the worker runs (e.g.,
REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined
bitmask fails to match any case. This leaves the reason as NULL and
completely bypasses the critical hw_protection_trigger().
Fix the problem by passing events bit by bit to the regulator event
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable BPF_LSM_CGROUP programs at load time
The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should
not attach any sleepable BPF programs there. Add support to the verifier
to explicitly reject attempts to load sleepable BPF programs destined
for LSM cgroup attachment.
Without this, we get the following splat from a BPF_LSM_CGROUP
program marked BPF_F_SLEEPABLE attached to file_open when it calls
bpf_get_dentry_xattr():
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load
preempt_count: 0, expected: 0
RCU nest depth: 2, expected: 0
Call Trace:
down_read+0x76/0x480
ext4_xattr_get+0x11f/0x700
__vfs_getxattr+0xf0/0x150
bpf_get_dentry_xattr+0xbb/0xf0
bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85
__cgroup_bpf_run_lsm_current+0x326/0x840
bpf_trampoline_6442534646+0x62/0x14d
security_file_open+0x34/0x60
do_dentry_open+0x340/0x1260
vfs_open+0x7a/0x440
path_openat+0x1bac/0x30a0
libbpf provides a .s named section variant for every sleepable
program type except lsm_cgroup, reflecting that per-cgroup LSM programs
are intended to only run in a non-sleepable context.
The above splat was obtained by bypassing libbpf by using bpf(2)
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
VMAs marked with VM_IO or VM_PFNMAP are not backed by struct page
objects, which GPUSVM requires in order to operate correctly. In
particular, get_pages() relies on hmm_range_fault() to resolve struct
pages for the target range.
Attempting to create an SVM range on such VMAs results in repeated
get_pages() failures and can lead to an infinite loop inside a driver’s
page‑fault handler. Prevent this by rejecting ranges on VM_IO or
VM_PFNMAP VMAs and returning -EIO. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/qeth: Check CAP_NET_ADMIN for private ioctls
Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL,
SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN
capable check to ensure unprivileged users cannot invoke them. |
| Headroom's LLM proxy derives the memory owner from the x-headroom-user-id request header. The header is read directly at several points in headroom/proxy/handlers/openai.py, including the chat completion and websocket paths, and nothing binds the value to the caller. A client can therefore name another user's identifier and read or write that user's stored LLM memory. The fix introduces a single resolve_memory_identity seam in headroom/proxy/identity.py that honors the header only for loopback or allowlisted callers and otherwise binds the identity to the proxy-token fingerprint or the operating system user. The pip console script binds 127.0.0.1 by default, but the reference docker-compose.yml ships --host 0.0.0.0 with published ports and no required HEADROOM_PROXY_TOKEN, which the server itself warns about at startup, so a deployment following the shipped compose exposes the affected data-plane routes to the network without authentication. |
| Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent has a heap out-of-bounds write in bufferevent_sock.c when bufferevent_socket_set_conn_address_ copies a kernel-supplied AF_UNIX peer address into bufferevent_private.conn_address. Release builds compiled with NDEBUG disable the EVUTIL_ASSERT length guard, and the evhttp accept path can pass a 110-byte sockaddr from accept() into the 28-byte field. An unauthenticated local peer able to connect to an AF_UNIX listener can overwrite the adjacent dns_request pointer and heap data, causing memory corruption with confidentiality, integrity, and availability impact. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. Nezha versions 1.14.13 through 1.14.14 and 2.0.0 through 2.0.9 do not bind stream identifiers created by CreateStream in service/rpc/io_stream.go to their creating user, and `GET /ws/terminal/:id` and `GET /ws/file/:id` only check whether the supplied UUID exists. An authenticated RoleMember who obtains a live stream UUID from logs, browser history, referer data, or telemetry can attach to another user's terminal or file-manager session, read and write target-server files, and execute shell commands. This issue is fixed in version 2.0.10. |
| Etherpad is a real-time collaborative editor. From 2.1.0 until 3.1.0, Etherpad uses the attacker-controlled x-proxy-path request header in src/node/hooks/express/admin.ts when substituting paths into HTML, JavaScript, and CSS under /admin without sanitization, Vary: x-proxy-path, or Cache-Control: private, no-store. A shared proxy or CDN can cache the resulting response and serve attacker-injected script to an administrator. In src/node/hooks/express/specialpages.ts, version 3.0.0 also accepts a protocol-relative x-proxy-path value when constructing the /p/:pad/timeslider redirect, allowing redirection to an attacker-controlled host. The issues are exploitable when the deployment permits client-supplied x-proxy-path headers to reach Etherpad. This issue is fixed in version 3.1.0. |
