| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In NLnet Labs Unbound 1.20.0 up to and including 1.25.1, when Unbound is configured with 'serve-expired: yes' and 'serve-expired-client-timeout > discard-timeout > 0' (contrary to the suggested values), the discard-timeout branch during the serve expired logic drops an aged client reply without performing the correct accounting for the number of reply addresses for the query. Other identical branches outside of serve expired perform the correct decrement. Since the counter is never decremented in such scenario, it can reach the maximum limit and new clients for duplicate in-flight queries are silently dropped resulting in degradation of resolution service. A malicious actor can exploit the vulnerability by querying the resolver for a client-controlled slow-on-demand authoritative zone that can drive the counter past the threshold. Shipped defaults for 'serve-expired-client-timeout: 1800' and 'discard-timeout: 1900' make the branch unreachable. |
| A weakness has been identified in umijs umi up to 4.6.63. The affected element is the function git.getFileCreateInfo of the file packages/utils/src/getFileGitIno.ts of the component GIT File Helper. This manipulation causes os command injection. The exploit has been made available to the public and could be used for attacks. Upgrading to version 4.6.64 is sufficient to fix this issue. Patch name: b6da12c17b024a43badb1fa565720c38cf42e647. Upgrading the affected component is advised. |
| A vulnerability was determined in QUSETIONS MiniCode-Python 0.1.0. This vulnerability affects the function subprocess.Popen of the file minicode/config.py of the component Project File Handler. Executing a manipulation can lead to os command injection. The attack may be launched remotely. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.1.0-rc1 is able to resolve this issue. This patch is called 9d868dc2550f426c6ddf8ee98f30ffe450ca5e32. It is suggested to upgrade the affected component. |
| NVIDIA TensorRT-LLM contains a vulnerability in the OpenAI-compatible inference API, where an attacker could cause allocation of GPU resources without limits or throttling. A successful exploit of this vulnerability might lead to denial of service. |
| An issue in EMQ NanoMQ v.0.24.9 allows a remote attacker to cause a denial of service via the nni_qos_db_set function in broker_tcp.c component |
| An issue in Generic OEM UZ801_v2.1 4G LTE Router V3.4.3 allows a remote attacker to execute arbitrary code via the sbin/adbd component |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback
mtk_snand_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: restore combined single-frag length gate
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not
set the requeue list for a requeued command to be kicked in the future.
The expectation is a call to scsi_run_host_queues() will kick all SCSI
devices once the recovery state is cleared.
However, scsi_run_host_queues() uses shost_for_each_device() which uses
scsi_device_get() and so will ignore devices in a partially removed
state like SDEV_CANCEL. But these devices may also have requeued
requests, leaving their requests stuck from not being kicked and causing
the removal process of the device to hang.
scsi_run_host_queues() needs to run against more devices than the macro
shost_for_each_device() allows. Instead of using the too limiting
scsi_device_get() state checks, only ignore devices in SDEV_DEL state or
when unable to acquire a reference. Attempt to run the queues for all
other devices when scsi_run_host_queues() is called. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: button: Fix ACPI GPE handler leak during removal
Commit a7e23ec17fee ("ACPI: button: Install notifier for system events
as well") changed the ACPI notify handler type for ACPI buttons to
ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect
that change. This leads to leaking the notify handler past driver
removal, which may cause a kernel crash to occur if ACPI notify on
the given device is triggered after removing the driver, and causes a
subsequent probe of the given device with the same driver to fail.
Address this by updating the acpi_remove_notify_handler() call in
acpi_button_remove() as appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: fix potential skb leak in igc_fpe_xmit_smd_frame()
When igc_fpe_init_tx_descriptor() fails, no one takes care of an
allocated skb, leaking it. [1]
Use dev_kfree_skb_any() on failure.
Tested on an I226 adapter with the following command, while injecting
faults in igc_fpe_init_tx_descriptor() to trigger the error path.
# ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on
[1]
unreferenced object 0xffff888113c6cdc0 (size 224):
...
backtrace (crc be3d3fda):
kmem_cache_alloc_node_noprof+0x3b1/0x410
__alloc_skb+0xde/0x830
igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0
igc_fpe_send_mpacket+0x37/0x90
ethtool_mmsv_verify_timer+0x15e/0x300 |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: avoid leaking a netdev ref on module flash errors
module_flash_fw_schedule() is missing undo for setting
the "in_progress" flag and taking the netdev reference.
Delay taking these, the device can't disappear while
we are holding rtnl_lock. |
| ntfy before 2.22.0 allows SSRF because of an unanchored regular expression for web push endpoint URLs. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix dma mapping leak on data setup error
We're leaking the initial DMA mapping during iteration if we fail to
allocate the tracking descriptor for both PRP and SGL. Unmap the
iterator directly; we can't use the existing unmap helper because it
depends on the tracking descriptor being successfully allocated, so a
new one for an in-use iterator is provided.
The mappings were also leaking when the driver detects an invalid
bio_vec when mapping PRPs, so fix that too. |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the FreeScout helpdesk application does not enforce rate limiting on the file upload endpoint. Any user can flood the server with upload requests, leading to database overload and potential denial of service for all users. Version 1.8.224 contains a fix. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page
When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due
to a PMD check failure, the pgtable allocated earlier via
pte_alloc_one() is never freed, causing a memory leak.
Added free_abort label to release the pgtable in error path. |
| A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The affected element is the function cgi_check_rsync_rw of the file /cgi-bin/remote_backup.cgi. The manipulation of the argument ip results in command injection. The attack can be executed remotely. The exploit has been made public and could be used. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
In mtk_pcie_setup_irq(), the IRQ domains are allocated before the
controller's IRQ is fetched. If the latter fails, the function
directly returns an error, without cleaning up the allocated domains.
Hence, reverse the order so that the IRQ domains are allocated after the
controller's IRQ is found.
This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI:
mediatek-gen3: add power control support". |
| A denial-of-service and resource exhaustion vulnerability exists within the `GDBus` component of GLib. The `gdbusauth` authentication mechanism fails to enforce proper length limitations on data lines read from a client. An unauthenticated local or remote attacker can exploit this lack of input validation by sending excessively long streams of data, causing the application to consume massive amounts of system memory and CPU, potentially leading to a crash or system hang. |
