| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Broadstreet plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘zone’ parameter in all versions up to, and including, 1.51.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 3658a87, contain a reachable assertion vulnerability in the APRS MIC-E decoder function aprs_mic_e() located in src/decode_aprs.c. When processing a specially crafted AX.25 frame containing a MIC-E message with an empty or truncated comment field, the application triggers an unhandled assertion checking for a non-empty comment. This assertion failure causes immediate process termination, allowing a remote, unauthenticated attacker to cause a denial of service by sending malformed APRS traffic. |
| wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 694c954, contain a stack-based buffer overflow vulnerability in the function kiss_rec_byte() located in src/kiss_frame.c. When processing crafted KISS frames that reach the maximum allowed frame length (MAX_KISS_LEN), the function appends a terminating FEND byte without reserving sufficient space in the stack buffer. This results in an out-of-bounds write followed by an out-of-bounds read during the subsequent call to kiss_unwrap(), leading to stack memory corruption or application crashes. This vulnerability may allow remote unauthenticated attackers to trigger a denial-of-service condition. |
| A vulnerability in the management and VPN web servers of the Remote Access SSL VPN feature of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly stop responding, resulting in a DoS condition.
This vulnerability is due to ineffective validation of user-supplied input during the Remote Access SSL VPN authentication process. An attacker could exploit this vulnerability by sending a crafted request to the VPN service on an affected device. A successful exploit could allow the attacker to cause a DoS condition where the device stops responding to Remote Access SSL VPN authentication requests. |
| An unauthenticated file deletion vulnerability in the Palo Alto Networks PAN-OS management web interface enables an unauthenticated attacker with network access to the management web interface to delete certain files as the “nobody” user; this includes limited logs and configuration files but does not include system files.
You can greatly reduce the risk of this issue by restricting access to the management web interface to only trusted internal IP addresses according to our recommended best practices deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue does not affect Cloud NGFW or Prisma Access software. |
| Unrestricted Upload of File with Dangerous Type vulnerability in Innorix Innorix WP allows Upload a Web Shell to a Web Server.This issue affects Innorix WP from All versions If the "exam" directory exists under the directory where the product is installed (ex: innorix/exam) |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal'), Missing Authorization vulnerability in Innorix WP allows Path Traversal.This issue affects Innorix WP from All versions If the "exam" directory exists under the directory where the product is installed (ex: innorix/exam) |
| Exposure of Sensitive Information to an Unauthorized Actor, Missing Encryption of Sensitive Data, Files or Directories Accessible to External Parties vulnerability in Kings Information & Network Co. KESS Enterprise on Windows allows Privilege Escalation, Modify Existing Service, Modify Shared File.This issue affects KESS Enterprise: before *.25.9.19.exe |
| In Nessus versions prior to 10.8.4, a non-authenticated attacker could alter Nessus logging entries by manipulating http requests to the application. |
| melange allows users to build apk packages using declarative pipelines. Starting in version 0.23.0 and prior to version 0.29.5, SBOM files generated by melange in apks had file system permissions mode 666. This potentially allows an unprivileged user to tamper with apk SBOMs on a running image, potentially confusing security scanners. An attacker could also perform a DoS under special circumstances. Version 0.29.5 fixes the issue. |
| A vulnerability in the GUI of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative privileges to upload files to an affected device.
This vulnerability is due to improper validation of the file copy function. An attacker could exploit this vulnerability by sending a crafted file upload using the Cisco ISE GUI. A successful exploit could allow the attacker to upload arbitrary files to an affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't log conflicting inode if it's a dir moved in the current transaction
We can't log a conflicting inode if it's a directory and it was moved
from one parent directory to another parent directory in the current
transaction, as this can result an attempt to have a directory with
two hard links during log replay, one for the old parent directory and
another for the new parent directory.
The following scenario triggers that issue:
1) We have directories "dir1" and "dir2" created in a past transaction.
Directory "dir1" has inode A as its parent directory;
2) We move "dir1" to some other directory;
3) We create a file with the name "dir1" in directory inode A;
4) We fsync the new file. This results in logging the inode of the new file
and the inode for the directory "dir1" that was previously moved in the
current transaction. So the log tree has the INODE_REF item for the
new location of "dir1";
5) We move the new file to some other directory. This results in updating
the log tree to included the new INODE_REF for the new location of the
file and removes the INODE_REF for the old location. This happens
during the rename when we call btrfs_log_new_name();
6) We fsync the file, and that persists the log tree changes done in the
previous step (btrfs_log_new_name() only updates the log tree in
memory);
7) We have a power failure;
8) Next time the fs is mounted, log replay happens and when processing
the inode for directory "dir1" we find a new INODE_REF and add that
link, but we don't remove the old link of the inode since we have
not logged the old parent directory of the directory inode "dir1".
As a result after log replay finishes when we trigger writeback of the
subvolume tree's extent buffers, the tree check will detect that we have
a directory a hard link count of 2 and we get a mount failure.
The errors and stack traces reported in dmesg/syslog are like this:
[ 3845.729764] BTRFS info (device dm-0): start tree-log replay
[ 3845.730304] page: refcount:3 mapcount:0 mapping:000000005c8a3027 index:0x1d00 pfn:0x11510c
[ 3845.731236] memcg:ffff9264c02f4e00
[ 3845.731751] aops:btree_aops [btrfs] ino:1
[ 3845.732300] flags: 0x17fffc00000400a(uptodate|private|writeback|node=0|zone=2|lastcpupid=0x1ffff)
[ 3845.733346] raw: 017fffc00000400a 0000000000000000 dead000000000122 ffff9264d978aea8
[ 3845.734265] raw: 0000000000001d00 ffff92650e6d4738 00000003ffffffff ffff9264c02f4e00
[ 3845.735305] page dumped because: eb page dump
[ 3845.735981] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=6 ino=257, invalid nlink: has 2 expect no more than 1 for dir
[ 3845.737786] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14881 owner 5
[ 3845.737789] BTRFS info (device dm-0): refs 4 lock_owner 0 current 30701
[ 3845.737792] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
[ 3845.737794] inode generation 3 transid 9 size 16 nbytes 16384
[ 3845.737795] block group 0 mode 40755 links 1 uid 0 gid 0
[ 3845.737797] rdev 0 sequence 2 flags 0x0
[ 3845.737798] atime 1764259517.0
[ 3845.737800] ctime 1764259517.572889464
[ 3845.737801] mtime 1764259517.572889464
[ 3845.737802] otime 1764259517.0
[ 3845.737803] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
[ 3845.737805] index 0 name_len 2
[ 3845.737807] item 2 key (256 DIR_ITEM 2363071922) itemoff 16077 itemsize 34
[ 3845.737808] location key (257 1 0) type 2
[ 3845.737810] transid 9 data_len 0 name_len 4
[ 3845.737811] item 3 key (256 DIR_ITEM 2676584006) itemoff 16043 itemsize 34
[ 3845.737813] location key (258 1 0) type 2
[ 3845.737814] transid 9 data_len 0 name_len 4
[ 3845.737815] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34
[ 3845.737816] location key (257 1 0) type 2
[
---truncated--- |
| The BackWPup – WordPress Backup & Restore Plugin plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the save_site_option() function in all versions up to, and including, 5.6.2. This makes it possible for authenticated attackers, with level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access to a vulnerable site. |
| The Flexmls® IDX Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'idx_frame' shortcode in all versions up to, and including, 3.14.27 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Missing about:blank indicator in custom-sized new windows in Dia before 1.9.0 on macOS could allow an attacker to spoof a trusted domain in the window title and mislead users about the current site. |
| The User Profile Builder WordPress plugin before 3.15.2 does not have a proper password reset process, allowing a few unauthenticated requests to reset the password of any user by knowing their username, such as administrator ones, and therefore gain access to their account |
| The FULL – Cliente plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg & remove_query_arg without appropriate escaping on the URL in all versions up to, and including, 3.1.22. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| A vulnerability in the SSH connection handling of Cisco Integrated Management Controller (IMC) for Cisco UCS B-Series, UCS C-Series, UCS S-Series, and UCS X-Series Servers could allow an authenticated, remote attacker to access internal services with elevated privileges.
This vulnerability is due to insufficient restrictions on access to internal services. An attacker with a valid user account could exploit this vulnerability by using crafted syntax when connecting to the Cisco IMC of an affected device through SSH. A successful exploit could allow the attacker to access internal services with elevated privileges, which may allow unauthorized modifications to the system, including the possibility of creating new administrator accounts on the affected device. |
| Action captions in Vaadin accept HTML by default but were not sanitized, potentially allowing Cross-site Scripting (XSS) if caption content is derived from user input.
In Vaadin Framework 7 and 8, the Action class is a general-purpose class that may be used by multiple components. The fixed versions sanitize captions by default and provide an API to explicitly enable HTML content mode for backwards compatibility.
In Vaadin 23 and newer, the Action class is only used by the Spreadsheet component. The fixed versions sanitize HTML using Jsoup with a relaxed safelist.
Vaadin 14 is not affected as Spreadsheet component was not supported.
Users of affected versions should apply the following mitigation or upgrade. Releases that have fixed this issue include:
Product version
Vaadin 7.0.0 - 7.7.49
Vaadin 8.0.0 - 8.29.1
Vaadin 23.1.0 - 23.6.5
Vaadin 24.0.0 - 24.8.13
Vaadin 24.9.0 - 24.9.6
Mitigation
Upgrade to 7.7.50
Upgrade to 8.30.0
Upgrade to 23.6.6
Upgrade to 24.8.14 or 24.9.7
Upgrade to 25.0.0 or newer
Artifacts Maven coordinatesVulnerable versionsFixed versioncom.vaadin:vaadin-server
7.0.0 - 7.7.49
≥7.7.50
com.vaadin:vaadin-server
8.0.0 - 8.29.1
≥8.30.0
com.vaadin:vaadin
23.1.0 - 23.6.5
≥23.6.6
com.vaadin:vaadin24.0.0 - 24.8.13
≥24.8.14
com.vaadin:vaadin24.9.0 - 24.9.6
≥24.9.7
com.vaadin:vaadin-spreadsheet-flow
23.1.0 - 23.6.5
≥23.6.6
com.vaadin:vaadin-spreadsheet-flow
24.0.0 - 24.8.13
≥24.8.14
com.vaadin:vaadin-spreadsheet-flow
24.9.0 - 24.9.6
≥24.9.7 |
| A security flaw has been discovered in loganhong php loganSite up to c035fb5c3edd0b2a5e32fd4051cbbc9e61a31426. This affects an unknown function of the file /includes/article_detail.php of the component Article Handler. Performing manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. |
