| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Buffer Overflow vulnerability in UTT nv518G nv518GV3v3.2.7-210919-161313 allows a remote attacker to cause a denial of service via the gohead/sub_483ba0 component |
| PIA's OIDC issuer allowlist for Jenkins tokens uses a bare string-prefix check (issuer.startswith(' https://ci.eclipse.org ') in is_issuer_known, pia/models.py:139) instead of validating the issuer as a properly host-bounded URL. An attacker can craft an issuer such as https://ci.eclipse.org@evil.host (userinfo trick) or https://ci.eclipse.org.evil.host (suffix trick) that satisfies the prefix check while pointing the OIDC discovery and JWKS fetches at a server the attacker controls. An unauthenticated caller of POST /v1/upload/sbom can use this to force PIA to make outbound HTTP(S) requests to an arbitrary attacker-chosen host, and to have oidc.verify_token accept a JWT signed with the attacker's own key. |
| The Minifilter communication port for driver `GFAC_Sys_x64.sys` in Little Orbit GFAC allows a local attacker to access privileged driver functionality via a communication interface that lacks appropriate access restrictions. |
| A malicious actor with access to the network could exploit an Improper Access Control vulnerability found in UniFi Protect Application to bypass authentication for data streaming. |
| A malicious actor with access to the network and high privileges could exploit an Improper Access Control vulnerability found in UniFi Access Application to escalate privileges on the host device. |
| A malicious actor with access to the network and low privileges could exploit an authenticated SQL Injection vulnerability found in UniFi Protect Application to escalate privileges on the host device. |
| A malicious actor with access to the network and under certain conditions could exploit an Incorrect Authorization vulnerability found in UniFi Network Application to persist privileges within UniFi Network Application after such access had been removed. |
| A malicious actor with access to the network and low privileges could exploit an Improper Access Control vulnerability found in UniFi Talk Application to escalate privileges within the UniFi Talk Application. |
| An Improper Export of Android Application Components vulnerability in ASUS Router App allows a third-party application on the same device to send a crafted Intent that causes ASUS Router App to open an specified URL.
Refer to the '
Security Update for ASUS Router Android App ' section on the ASUS Security Advisory for more information. |
| Dell Client Platform BIOS contains an Authentication Bypass by Primary Weakness vulnerability. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Information Disclosure. |
| In affected versions of Eclipse Theia (1.8.1 and later), the browser backend exposes privileged terminal RPC over WebSocket (/services/shell-terminal, /services/terminals/:id) without service-level authentication.
WebSocket origin validation in @theia/core is fail-open: connections are accepted when the Origin header is missing or when no THEIA_HOSTS allowlist is configured (the default). The Socket.IO integration additionally replaces the real Origin header with a client-supplied fix-origin header that an attacker can control or omit.
As a result, a foreign-origin web page visited by a user with a running Theia instance can open the /services WebSocket namespace, invoke terminal creation, attach to the resulting terminal data channel, execute arbitrary OS commands, and read their output. This affects both local developer setups (drive-by attack) and hosted or tunneled deployments without strong external authentication.
A fix is in development that enforces same-origin validation by default, removes trust in the fix-origin header, gates HTTP and WebSocket access on a SameSite=Strict; HttpOnly connection-token cookie, and sanitizes shell terminal creation options. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper neutralization of special elements used in an OS command ('OS command Injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper neutralization of special elements used in an OS command ('OS command Injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution. |
| mrubyc through release3.4.1 was found to contain an out-of-bounds read in builtin missing-method lookup inside mrbc_find_method(). |
| mrubyc through 3.4.1 was found to contain a NULL pointer dereference in src/vm.c in op_super() / OP_SUPER due to a missing runtime guard for top-level super. |
| ajenti through v2.2.13 has a clickjacking weakness in the browser-facing login and administrative UI. In ajenti-core/aj/http.py, the core HTTP response path initializes an empty header list, forwards handler-added headers verbatim, and finalizes responses through WSGI start_response() without adding anti-framing protections such as X-Frame-Options or a Content-Security-Policy frame-ancestors restriction. |
| The FileOrganizer WordPress plugin before 1.1.9, Advanced File Manager WordPress plugin before 5.4.12, File Manager Pro WordPress plugin before 2.1.1, File Manager WordPress plugin before 8.0.4 do not properly escape a parameter before passing it to a shell command when processing image operations, allowing authenticated users to perform OS Command Injection. This requires the server to have the ImageMagick convert CLI available without either the PHP imagick or GD extensions. |
| Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.
The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Undertow Component.
The camel-undertow HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false, whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. In addition, for Rest DSL consumers the muteException option was not honoured at all: the RestUndertowHttpBinding was created with a hard-coded false, so the stack trace was returned even when muteException=true had been configured.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-undertow consumer (for example undertow: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.undertow.mute-exception=true property), so that processing errors no longer return the stack trace to the client; note that on affected releases this workaround does not cover Rest DSL consumers, whose binding ignores the option until the fix is applied. |
| Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component.
JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it.
This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes. |
