| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in OpenText™ ALM Octane Management allows Stored XSS. The vulnerability could result in a remote code execution attack.
This issue affects ALM Octane Management: from 16.2.100 through 24.4. |
| A Remote
Code Execution vulnerability exists in the affected product. The vulnerability requires
a high level of permissions and exists due to improper input validation resulting
in the possibility of a malicious Updated Agent being deployed. |
| The MsUpload extension for MediaWiki is vulnerable to stored XSS via the msu-continue system message, which is inserted into the DOM without proper sanitization. The vulnerability occurs in the file upload UI when the same filename is uploaded twice.
This issue affects Mediawiki - MsUpload extension: from 1.39.X before 1.39.13, from 1.42.X before 1.42.7, from 1.43.X before 1.43.2. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: check device's attached status in compat ioctls
Syzbot identified an issue [1] that crashes kernel, seemingly due to
unexistent callback dev->get_valid_routes(). By all means, this should
not occur as said callback must always be set to
get_zero_valid_routes() in __comedi_device_postconfig().
As the crash seems to appear exclusively in i386 kernels, at least,
judging from [1] reports, the blame lies with compat versions
of standard IOCTL handlers. Several of them are modified and
do not use comedi_unlocked_ioctl(). While functionality of these
ioctls essentially copy their original versions, they do not
have required sanity check for device's attached status. This,
in turn, leads to a possibility of calling select IOCTLs on a
device that has not been properly setup, even via COMEDI_DEVCONFIG.
Doing so on unconfigured devices means that several crucial steps
are missed, for instance, specifying dev->get_valid_routes()
callback.
Fix this somewhat crudely by ensuring device's attached status before
performing any ioctls, improving logic consistency between modern
and compat functions.
[1] Syzbot report:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0
Call Trace:
<TASK>
get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline]
parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401
do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594
compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline]
comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273
__do_compat_sys_ioctl fs/ioctl.c:695 [inline]
__se_compat_sys_ioctl fs/ioctl.c:638 [inline]
__ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
... |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: multiq3: sanitize config options in multiq3_attach()
Syzbot identified an issue [1] in multiq3_attach() that induces a
task timeout due to open() or COMEDI_DEVCONFIG ioctl operations,
specifically, in the case of multiq3 driver.
This problem arose when syzkaller managed to craft weird configuration
options used to specify the number of channels in encoder subdevice.
If a particularly great number is passed to s->n_chan in
multiq3_attach() via it->options[2], then multiple calls to
multiq3_encoder_reset() at the end of driver-specific attach() method
will be running for minutes, thus blocking tasks and affected devices
as well.
While this issue is most likely not too dangerous for real-life
devices, it still makes sense to sanitize configuration inputs. Enable
a sensible limit on the number of encoder chips (4 chips max, each
with 2 channels) to stop this behaviour from manifesting.
[1] Syzbot crash:
INFO: task syz.2.19:6067 blocked for more than 143 seconds.
...
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5254 [inline]
__schedule+0x17c4/0x4d60 kernel/sched/core.c:6862
__schedule_loop kernel/sched/core.c:6944 [inline]
schedule+0x165/0x360 kernel/sched/core.c:6959
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016
__mutex_lock_common kernel/locking/mutex.c:676 [inline]
__mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760
comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868
chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414
do_dentry_open+0x953/0x13f0 fs/open.c:965
vfs_open+0x3b/0x340 fs/open.c:1097
... |
| In the Linux kernel, the following vulnerability has been resolved:
bfs: Reconstruct file type when loading from disk
syzbot is reporting that S_IFMT bits of inode->i_mode can become bogus when
the S_IFMT bits of the 32bits "mode" field loaded from disk are corrupted
or when the 32bits "attributes" field loaded from disk are corrupted.
A documentation says that BFS uses only lower 9 bits of the "mode" field.
But I can't find an explicit explanation that the unused upper 23 bits
(especially, the S_IFMT bits) are initialized with 0.
Therefore, ignore the S_IFMT bits of the "mode" field loaded from disk.
Also, verify that the value of the "attributes" field loaded from disk is
either BFS_VREG or BFS_VDIR (because BFS supports only regular files and
the root directory). |
| parseWildcardRules in Gin-Gonic CORS middleware before 1.6.0 mishandles a wildcard at the end of an origin string, e.g., https://example.community/* is allowed when the intention is that only https://example.com/* should be allowed, and http://localhost.example.com/* is allowed when the intention is that only http://localhost/* should be allowed. |
| Asio C++ Library before 1.13.0 lacks a fallback error code in the case of SSL_ERROR_SYSCALL with no associated error information from the SSL library being used. |
| sudo-rs is a memory safe implementation of sudo and su written in Rust. With `Defaults targetpw` (or `Defaults rootpw`) enabled, the password of the target account (or root account) instead of the invoking user is used for authentication. sudo-rs starting in version 0.2.5 and prior to version 0.2.10 incorrectly recorded the invoking user’s UID instead of the authenticated-as user's UID in the authentication timestamp. Any later `sudo` invocation on the same terminal while the timestamp was still valid would use that timestamp, potentially bypassing new authentication even if the policy would have required it. A highly-privileged user (able to run commands as other users, or as root, through sudo) who knows one password of an account they are allowed to run commands as, would be able to run commands as any other account the policy permits them to run commands for, even if they don't know the password for those accounts. A common instance of this would be that a user can still use their own password to run commands as root (the default behaviour of `sudo`), effectively negating the intended behaviour of the `targetpw` or `rootpw` options. Version 0.2.10 contains a patch for the issue. Versions prior to 0.2.5 are not affected, since they do not offer `Defaults targetpw` or `Defaults rootpw`. |
| The Team Circle Image Slider With Lightbox plugin for WordPress is vulnerable to SQL Injection via the 'id' parameter in all versions up to, and including, 1.0.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| Missing Authorization vulnerability in Event Espresso Event Espresso 4 Decaf allows Functionality Misuse.This issue affects Event Espresso 4 Decaf: from n/a through 4.10.44.Decaf. |
| Dongyoung Media DM-AP240T/W wireless access points contain an unauthenticated configuration disclosure vulnerability in the /cgi-bin/sys_system_config management endpoint. The endpoint allows remote retrieval of a compressed configuration archive without requiring authentication or authorization. The exposed configuration may include administrative credentials and other sensitive settings, enabling an unauthenticated attacker to obtain information that can facilitate further compromise of the device or network. |
| Tellion HN-2204AP routers contain an unauthenticated configuration disclosure vulnerability in the /cgi-bin/system_config_file management endpoint. The endpoint allows remote retrieval of a compressed configuration archive without requiring authentication or authorization. The exposed configuration may include administrative credentials, wireless keys, and other sensitive settings, enabling an unauthenticated attacker to obtain information that can facilitate further compromise of the device or network. |
| devolo dLAN Cockpit 4.3.1 contains an unquoted service path vulnerability in the 'DevoloNetworkService' that allows local non-privileged users to potentially execute arbitrary code. Attackers can exploit the insecure service path configuration by inserting malicious code in the system root path to execute with elevated privileges during application startup or system reboot. |
| NetPCLinker 1.0.0.0 contains a buffer overflow vulnerability in the Clients Control Panel DNS/IP field that allows attackers to execute arbitrary shellcode. Attackers can craft a malicious payload in the DNS/IP input to overwrite SEH handlers and execute shellcode when adding a new client. |
| iSeeQ Hybrid DVR WH-H4 1.03R contains an unauthenticated vulnerability in the get_jpeg script that allows unauthorized access to live video streams. Attackers can retrieve video snapshots from specific camera channels by sending requests to the /cgi-bin/get_jpeg endpoint without authentication. |
| V-SOL GPON/EPON OLT Platform 2.03 contains an unauthenticated information disclosure vulnerability that allows attackers to download configuration files via direct object reference. Attackers can retrieve sensitive configuration data by sending HTTP GET requests to the usrcfg.conf endpoint, potentially enabling authentication bypass and system access. |
| Legrand BTicino Driver Manager F454 1.0.51 contains multiple web vulnerabilities that allow attackers to perform administrative actions without proper request validation. Attackers can exploit cross-site request forgery to change passwords and inject stored cross-site scripting payloads through unvalidated GET parameters. |
| Ross Video DashBoard 8.5.1 contains an elevation of privileges vulnerability that allows authenticated users to modify executable files due to improper permission settings. Attackers can exploit the 'M' or 'C' flags for 'Authenticated Users' group to replace the DashBoard.exe binary with a malicious executable. |
| Beward N100 H.264 VGA IP Camera M2.1.6 contains a cross-site request forgery vulnerability that allows attackers to perform administrative actions without proper request validation. Attackers can craft a malicious web page with a hidden form to add an admin user by tricking a logged-in user into submitting the form. |
