| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Add missing terminator for zen5_rdseed_microcode
Running x86_match_min_microcode_rev() on a Zen5 CPU trips up KASAN for an out
of bounds access. |
| A Server-Side Request Forgery (SSRF) vulnerability exists in the MediaConnector class within the vLLM project's multimodal feature set. The load_from_url and load_from_url_async methods fetch and process media from user-provided URLs without adequate restrictions on the target hosts. This allows an attacker to coerce the vLLM server into making arbitrary requests to internal network resources. |
| The RFC enabled function module allows a low privileged user to add any workbook to any user's workplace favourites. This vulnerability could be utilized to identify usernames and access information about targeted user's workplaces. There is low impact on integrity of the application. |
| SAP NetWeaver Enterprise Portal is vulnerable to reflected cross site scripting due to insufficient encoding of user-controlled input. An unauthenticated attacker could craft a malicious URL and trick a user to click it. If the victim clicks on this crafted URL before it times out, then the attacker could read and manipulate user content in the browser. |
| Under certain conditions Statutory Reports in SAP S/4 HANA allows an attacker with basic privileges to access information which would otherwise be restricted. The vulnerability could expose internal user data that should remain confidential. It does not impact the integrity and availability of the application |
| In the Linux kernel, the following vulnerability has been resolved:
mlx5: Fix default values in create CQ
Currently, CQs without a completion function are assigned the
mlx5_add_cq_to_tasklet function by default. This is problematic since
only user CQs created through the mlx5_ib driver are intended to use
this function.
Additionally, all CQs that will use doorbells instead of polling for
completions must call mlx5_cq_arm. However, the default CQ creation flow
leaves a valid value in the CQ's arm_db field, allowing FW to send
interrupts to polling-only CQs in certain corner cases.
These two factors would allow a polling-only kernel CQ to be triggered
by an EQ interrupt and call a completion function intended only for user
CQs, causing a null pointer exception.
Some areas in the driver have prevented this issue with one-off fixes
but did not address the root cause.
This patch fixes the described issue by adding defaults to the create CQ
flow. It adds a default dummy completion function to protect against
null pointer exceptions, and it sets an invalid command sequence number
by default in kernel CQs to prevent the FW from sending an interrupt to
the CQ until it is armed. User CQs are responsible for their own
initialization values.
Callers of mlx5_core_create_cq are responsible for changing the
completion function and arming the CQ per their needs. |
| In the Linux kernel, the following vulnerability has been resolved:
netrom: Fix memory leak in nr_sendmsg()
syzbot reported a memory leak [1].
When function sock_alloc_send_skb() return NULL in nr_output(), the
original skb is not freed, which was allocated in nr_sendmsg(). Fix this
by freeing it before return.
[1]
BUG: memory leak
unreferenced object 0xffff888129f35500 (size 240):
comm "syz.0.17", pid 6119, jiffies 4294944652
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 10 52 28 81 88 ff ff ..........R(....
backtrace (crc 1456a3e4):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4983 [inline]
slab_alloc_node mm/slub.c:5288 [inline]
kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5340
__alloc_skb+0x203/0x240 net/core/skbuff.c:660
alloc_skb include/linux/skbuff.h:1383 [inline]
alloc_skb_with_frags+0x69/0x3f0 net/core/skbuff.c:6671
sock_alloc_send_pskb+0x379/0x3e0 net/core/sock.c:2965
sock_alloc_send_skb include/net/sock.h:1859 [inline]
nr_sendmsg+0x287/0x450 net/netrom/af_netrom.c:1105
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
sock_write_iter+0x293/0x2a0 net/socket.c:1195
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x45d/0x710 fs/read_write.c:686
ksys_write+0x143/0x170 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| Shenzhen Haichangxing Technology Co., Ltd HCX H822 4G LTE Router M7628NNxISPxUIv2_v1.0.1557.15.35_P0 is vulnerable to Incorrect Access Control. Unauthenticated factory mode reset and command injection leads to information exposure and root shell access. |
| Incorrect access control in Meabilis CMS 1.0 allows attackers to access other users' address books via unspecified vectors. |
| A vulnerability in the Pix-Link LV-WR21Q router's language module allows remote attackers to trigger a denial of service (DoS) by sending a specially crafted HTTP POST request containing non-existing language parameter. This renders the server unable to serve correct lang.js file, which causes administrator panel to not work, resulting in DoS until the language settings is reverted to a correct value. The Denial of Service affects only the administrator panel and does not affect other router functionalities.
The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only version V108_108 was tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable. |
| A vulnerability has been identified in Industrial Edge Management Pro (All versions < V1.9.5), Industrial Edge Management Virtual (All versions < V2.3.1-1). Affected components do not properly validate the device tokens. This could allow an unauthenticated remote attacker to impersonate other devices onboarded to the system. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Disable trampoline for kernel module function trace
The current LoongArch BPF trampoline implementation is incompatible
with tracing functions in kernel modules. This causes several severe
and user-visible problems:
* The `bpf_selftests/module_attach` test fails consistently.
* Kernel lockup when a BPF program is attached to a module function [1].
* Critical kernel modules like WireGuard experience traffic disruption
when their functions are traced with fentry [2].
Given the severity and the potential for other unknown side-effects, it
is safest to disable the feature entirely for now. This patch prevents
the BPF subsystem from allowing trampoline attachments to kernel module
functions on LoongArch.
This is a temporary mitigation until the core issues in the trampoline
code for kernel module handling can be identified and fixed.
[root@fedora bpf]# ./test_progs -a module_attach -v
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_module_attach:PASS:skel_open 0 nsec
test_module_attach:PASS:set_attach_target 0 nsec
test_module_attach:PASS:set_attach_target_explicit 0 nsec
test_module_attach:PASS:skel_load 0 nsec
libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP
libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP
test_module_attach:FAIL:skel_attach skeleton attach failed: -524
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
[1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/
[2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/ |
| Bareos is open source software for backup, archiving, and recovery of data for operating systems. When a command ACL is in place and a user executes a command in bconsole using an abbreviation (i.e. "w" for "whoami") the ACL check did not apply to the full form (i.e. "whoami") but to the abbreviated form (i.e. "w"). If the command ACL is configured with negative ACL that should forbid using the "whoami" command, you could still use "w" or "who" as a command successfully. Fixes for the problem are shipped in Bareos versions 23.0.4, 22.1.6 and 21.1.11. If only positive command ACLs are used without any negation, the problem does not occur. |
| A CSRF issue was discovered in the administrative web GUI in Blu-Castle BCUM221E 1.0.0P220507. This can be exploited via a URL, an image load, an XMLHttpRequest, etc. and can result in exposure of data or unintended code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: adjust read range correctly for non-block-aligned positions
iomap_adjust_read_range() assumes that the position and length passed in
are block-aligned. This is not always the case however, as shown in the
syzbot generated case for erofs. This causes too many bytes to be
skipped for uptodate blocks, which results in returning the incorrect
position and length to read in. If all the blocks are uptodate, this
underflows length and returns a position beyond the folio.
Fix the calculation to also take into account the block offset when
calculating how many bytes can be skipped for uptodate blocks. |
| An authenticated attacker with high privilege can use functions of SLCM transactions to which access should be restricted. This may result in an escalation of privileges causing low impact on integrity of the application. |
| The Honeywell Experion PKS and OneWireless WDM
contains Sensitive Information in Resource vulnerability in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to a Communication Channel Manipulation, which could result in buffer reuse which may cause incorrect system behavior.
Honeywell also recommends updating to the most recent version of
Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are
C300, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are 520.1 before
520.2 TCU9 HF1 and 530 before 530 TCU3. The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| Due to lack of proper authorization checks when calling user, a function module in obsolete Tobin interface in SAP Production and Revenue Accounting allows unauthorized access that could lead to disclosure of highly sensitive data. There is no impact on integrity or availability. |
| A vulnerability in the web-based management interface of Cisco Expressway Series could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
Note: Cisco Expressway Series refers to Cisco Expressway Control (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices. |
| A code execution vulnerability exists in the Xiaomi shop applicationproduct. The vulnerability is caused by improper input validation and can be exploited by attackers to execute malicious code. |
