| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in mod_proxy_cluster. The issue is that the <Directory> directive should be replaced by the <Location> directive as the former does not restrict IP/host access as `Require ip IP_ADDRESS` would suggest. This means that anyone with access to the host might send MCMP requests that may result in adding/removing/updating nodes for the balancing. However, this host should not be accessible to the public network as it does not serve the general traffic. |
| There is a vulnerability in the Supermicro BMC web function at Supermicro MBD-X13SEDW-F. After logging into the BMC Web server, an attacker can use a specially crafted payload to trigger the Stack buffer overflow vulnerability. |
| Texas Instruments CC2652RB LaunchPad SimpleLink CC13XX CC26XX SDK 7.41.00.17 was discovered to utilize insufficient permission checks on critical fields within Bluetooth Low Energy (BLE) data packets. This issue allows attackers to cause a Denial of Service (DoS) via a crafted LL_Length_Req packet. |
| ping in iputils before 20250602 allows a denial of service (application error in adaptive ping mode or incorrect data collection) via a crafted ICMP Echo Reply packet, because a zero timestamp can lead to large intermediate values that have an integer overflow when squared during statistics calculations. NOTE: this issue exists because of an incomplete fix for CVE-2025-47268 (that fix was only about timestamp calculations, and it did not account for a specific scenario where the original timestamp in the ICMP payload is zero). |
| A flaw was found in GIMP when processing certain TGA image files. If a user opens one of these image files that has been specially crafted by an attacker, GIMP can be tricked into making serious memory errors, potentially leading to crashes and causing a heap buffer overflow. |
| The WPshop 2 – E-Commerce plugin for WordPress is vulnerable to privilege escalation via account takeover in versions 2.0.0 to 2.6.0. This is due to the plugin not properly validating a user's identity prior to updating their details like email & password through the update() function. This makes it possible for authenticated attackers, with subscriber-level access and above, to change arbitrary user's passwords, including administrators, and leverage that to gain access to their account. |
| The Element Pack Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Open Street Map widget's marker content parameter in all versions up to, and including, 8.3.4. This is due to insufficient input sanitization and output escaping on user-supplied attributes in the render function. This makes it possible for authenticated attackers, with contributor level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Hitron CGNF-TWN 3.1.1.43-TWN-pre3 contains a command injection vulnerability in the telnet service. The issue arises due to improper input validation within the telnet command handling mechanism. An attacker can exploit this vulnerability by injecting arbitrary commands through the telnet interface when prompted for inputs or commands. Successful exploitation could lead to remote code execution (RCE) under the privileges of the telnet user, potentially allowing unauthorized access to system settings and sensitive information. |
| i-doit Open Source CMDB 1.14.1 contains a file deletion vulnerability in the import module that allows authenticated attackers to delete arbitrary files by manipulating the delete_import parameter. Attackers can send a POST request to the import module with a crafted filename to remove files from the server's filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
After a call to console_unlock() in vcs_write() the vc_data struct can be
freed by vc_port_destruct(). Because of that, the struct vc_data pointer
must be reloaded in the while loop in vcs_write() after console_lock() to
avoid a UAF when vcs_size() is called.
Syzkaller reported a UAF in vcs_size().
BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215)
Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119
Call Trace:
<TASK>
__asan_report_load4_noabort (mm/kasan/report_generic.c:380)
vcs_size (drivers/tty/vt/vc_screen.c:215)
vcs_write (drivers/tty/vt/vc_screen.c:664)
vfs_write (fs/read_write.c:582 fs/read_write.c:564)
...
<TASK>
Allocated by task 1213:
kmalloc_trace (mm/slab_common.c:1064)
vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680
drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058)
con_install (drivers/tty/vt/vt.c:3334)
tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415
drivers/tty/tty_io.c:1392)
tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128)
chrdev_open (fs/char_dev.c:415)
do_dentry_open (fs/open.c:921)
vfs_open (fs/open.c:1052)
...
Freed by task 4116:
kfree (mm/slab_common.c:1016)
vc_port_destruct (drivers/tty/vt/vt.c:1044)
tty_port_destructor (drivers/tty/tty_port.c:296)
tty_port_put (drivers/tty/tty_port.c:312)
vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2))
vt_ioctl (drivers/tty/vt/vt_ioctl.c:903)
tty_ioctl (drivers/tty/tty_io.c:2778)
...
The buggy address belongs to the object at ffff8880beab8800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 424 bytes inside of
freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00)
The buggy address belongs to the physical page:
page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0xbeab8
head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0
pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint |
| A directory listing issue in the baserCMS plugin in D-ZERO CO., LTD. BurgerEditor and BurgerEditor Limited Edition before 2.25.1 allows remote attackers to obtain sensitive information by exposing a list of the uploaded files. |
| A SQLi vulnerability in DJ-Classifieds component 3.9.2-3.10.1 for Joomla was discovered. The issue allows privileged users to execute arbitrary SQL commands. |
| A vulnerability has been found in viames Pair Framework up to 1.9.11 and classified as critical. Affected by this vulnerability is the function getCookieContent of the file /src/UserRemember.php of the component PHP Object Handler. The manipulation of the argument cookieName leads to deserialization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| A SQL injection vulnerability in the JS Jobs plugin versions 1.3.2-1.4.4 for Joomla allows low-privilege users to execute arbitrary SQL commands. |
| Project Gardener implements the automated management and operation of Kubernetes clusters as a service. Code injection may be possible in Gardener Extensions for AWS providers prior to version 1.64.0, Azure providers prior to version 1.55.0, OpenStack providers prior to version 1.49.0, and GCP providers prior to version 1.46.0. This vulnerability could allow a user with administrative privileges for a Gardener project to obtain control over the seed cluster where the shoot cluster is managed. This affects all Gardener installations where Terraformer is used/can be enabled for infrastructure provisioning with any of the affected components. This issue has been patched in Gardener Extensions for AWS providers version 1.64.0, Azure providers version 1.55.0, OpenStack providers version 1.49.0, and GCP providers version 1.46.0. |
| There is a vulnerability in the Supermicro BMC web function at Supermicro MBD-X13SEDW-F. After logging into the BMC Web server, an attacker can use a specially crafted payload to trigger the Stack buffer overflow vulnerability. |
| This vulnerability allows attackers to execute arbitrary commands on the underlying system. Because the web portal runs with root privileges, successful exploitation grants full control over the device, potentially compromising its availability, confidentiality, and integrity. |
| This vulnerability allows attackers to directly query the underlying database, potentially retrieving all data stored in the Billing Admin database, including user credentials. User passwords are stored in plaintext, significantly increasing the severity of this issue. |
| In GRAU DATA Blocky before 3.1, Blocky-Gui has a Client-Side Enforcement of Server-Side Security vulnerability. An attacker with Windows administrative or debugging privileges can patch a binary in memory or on disk to bypass the password login requirement and gain full access to all functions of the program. |
| This vulnerability allows malicious actors to execute arbitrary commands on the underlying system of the Zenitel ICX500 and ICX510 Gateway, granting shell access. Exploitation can compromise the device’s availability, confidentiality, and integrity. |
