| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sylius is an Open Source eCommerce Framework on Symfony. A security vulnerability was discovered in the `/api/v2/shop/adjustments/{id}` endpoint, which retrieves order adjustments based on incremental integer IDs. The vulnerability allows an attacker to enumerate valid adjustment IDs and retrieve order tokens. Using these tokens, an attacker can access guest customer order details - sensitive guest customer information. The issue is fixed in versions: 1.12.19, 1.13.4 and above. The `/api/v2/shop/adjustments/{id}` will always return `404` status. Users are advised to upgrade. Users unable to upgrade may alter their config to mitigate this issue. Please see the linked GHSA for details. |
| Missing Authorization vulnerability in Daniel Söderström / Sidney van de Stouwe Subscribe to Category allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Subscribe to Category: from n/a through 2.7.4. |
| Stack-based buffer overflow in some drivers for Intel(R) Ethernet Connection I219 Series before version 12.19.1.39 may allow an authenticated user to potentially enable denial of service via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in smb2_close_cached_fid()
find_or_create_cached_dir() could grab a new reference after kref_put()
had seen the refcount drop to zero but before cfid_list_lock is acquired
in smb2_close_cached_fid(), leading to use-after-free.
Switch to kref_put_lock() so cfid_release() is called with
cfid_list_lock held, closing that gap. |
| RSSHub is an RSS network. Prior to commit 64e00e7, RSSHub's `docker-test-cont.yml` workflow is vulnerable to Artifact Poisoning, which could have lead to a full repository takeover. Downstream users of RSSHub are not vulnerable to this issue, and commit 64e00e7 fixed the underlying issue and made the repository no longer vulnerable. The `docker-test-cont.yml` workflow gets triggered when the `PR - Docker build test` workflow completes successfully. It then collects some information about the Pull Request that triggered the triggering workflow and set some labels depending on the PR body and sender. If the PR also contains a `routes` markdown block, it will set the `TEST_CONTINUE` environment variable to `true`. The workflow then downloads and extracts an artifact uploaded by the triggering workflow which is expected to contain a single `rsshub.tar.zst` file. However, prior to commit 64e00e7, it did not validate and the contents were extracted in the root of the workspace overriding any existing files. Since the contents of the artifact were not validated, it is possible for a malicious actor to send a Pull Request which uploads, not just the `rsshub.tar.zst` compressed docker image, but also a malicious `package.json` file with a script to run arbitrary code in the context of the privileged workflow. As of commit 64e00e7, this scenario has been addressed and the RSSHub repository is no longer vulnerable. |
| A vulnerability has been found in Fujifilm Business Innovation Apeos C3070, Apeos C5570 and Apeos C6580 up to 24.8.28 and classified as critical. This vulnerability affects unknown code of the file /home/index.html#hashHome of the component Web Interface. The manipulation leads to improper authorization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor explains that "during technical verification it is not possible to reproduce any active actions like reboots which were mentioned in the original researcher disclosure." |
| In the Linux kernel, the following vulnerability has been resolved:
s390/idle: mark arch_cpu_idle() noinstr
linux-next commit ("cpuidle: tracing: Warn about !rcu_is_watching()")
adds a new warning which hits on s390's arch_cpu_idle() function:
RCU not on for: arch_cpu_idle+0x0/0x28
WARNING: CPU: 2 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x24c/0x258
Modules linked in:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.2.0-rc6-next-20230202 #4
Hardware name: IBM 8561 T01 703 (z/VM 7.3.0)
Krnl PSW : 0404d00180000000 00000000002b55c0 (arch_ftrace_ops_list_func+0x250/0x258)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: c0000000ffffbfff 0000000080000002 0000000000000026 0000000000000000
0000037ffffe3a28 0000037ffffe3a20 0000000000000000 0000000000000000
0000000000000000 0000000000f4acf6 00000000001044f0 0000037ffffe3cb0
0000000000000000 0000000000000000 00000000002b55bc 0000037ffffe3bb8
Krnl Code: 00000000002b55b0: c02000840051 larl %r2,0000000001335652
00000000002b55b6: c0e5fff512d1 brasl %r14,0000000000157b58
#00000000002b55bc: af000000 mc 0,0
>00000000002b55c0: a7f4ffe7 brc 15,00000000002b558e
00000000002b55c4: 0707 bcr 0,%r7
00000000002b55c6: 0707 bcr 0,%r7
00000000002b55c8: eb6ff0480024 stmg %r6,%r15,72(%r15)
00000000002b55ce: b90400ef lgr %r14,%r15
Call Trace:
[<00000000002b55c0>] arch_ftrace_ops_list_func+0x250/0x258
([<00000000002b55bc>] arch_ftrace_ops_list_func+0x24c/0x258)
[<0000000000f5f0fc>] ftrace_common+0x1c/0x20
[<00000000001044f6>] arch_cpu_idle+0x6/0x28
[<0000000000f4acf6>] default_idle_call+0x76/0x128
[<00000000001cc374>] do_idle+0xf4/0x1b0
[<00000000001cc6ce>] cpu_startup_entry+0x36/0x40
[<0000000000119d00>] smp_start_secondary+0x140/0x150
[<0000000000f5d2ae>] restart_int_handler+0x6e/0x90
Mark arch_cpu_idle() noinstr like all other architectures with
CONFIG_ARCH_WANTS_NO_INSTR (should) have it to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix warning for holder mismatch from export_rdev()
Commit a1d767191096 ("md: use mddev->external to select holder in
export_rdev()") fix the problem that 'claim_rdev' is used for
blkdev_get_by_dev() while 'rdev' is used for blkdev_put().
However, if mddev->external is changed from 0 to 1, then 'rdev' is used
for blkdev_get_by_dev() while 'claim_rdev' is used for blkdev_put(). And
this problem can be reporduced reliably by following:
New file: mdadm/tests/23rdev-lifetime
devname=${dev0##*/}
devt=`cat /sys/block/$devname/dev`
pid=""
runtime=2
clean_up_test() {
pill -9 $pid
echo clear > /sys/block/md0/md/array_state
}
trap 'clean_up_test' EXIT
add_by_sysfs() {
while true; do
echo $devt > /sys/block/md0/md/new_dev
done
}
remove_by_sysfs(){
while true; do
echo remove > /sys/block/md0/md/dev-${devname}/state
done
}
echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed"
add_by_sysfs &
pid="$pid $!"
remove_by_sysfs &
pid="$pid $!"
sleep $runtime
exit 0
Test cmd:
./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime
Test result:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 960 at block/bdev.c:618 blkdev_put+0x27c/0x330
Modules linked in: multipath md_mod loop
CPU: 0 PID: 960 Comm: test Not tainted 6.5.0-rc2-00121-g01e55c376936-dirty #50
RIP: 0010:blkdev_put+0x27c/0x330
Call Trace:
<TASK>
export_rdev.isra.23+0x50/0xa0 [md_mod]
mddev_unlock+0x19d/0x300 [md_mod]
rdev_attr_store+0xec/0x190 [md_mod]
sysfs_kf_write+0x52/0x70
kernfs_fop_write_iter+0x19a/0x2a0
vfs_write+0x3b5/0x770
ksys_write+0x74/0x150
__x64_sys_write+0x22/0x30
do_syscall_64+0x40/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix the problem by recording if 'rdev' is used as holder. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Improve page fault error reporting
If IOMMU domain for device group is not setup properly then we may hit
IOMMU page fault. Current page fault handler assumes that domain is
always setup and it will hit NULL pointer derefence (see below sample log).
Lets check whether domain is setup or not and log appropriate message.
Sample log:
----------
amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6
BUG: kernel NULL pointer dereference, address: 0000000000000058
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89
Hardware name: xxx
RIP: 0010:report_iommu_fault+0x11/0x90
[...]
Call Trace:
<TASK>
amd_iommu_int_thread+0x60c/0x760
? __pfx_irq_thread_fn+0x10/0x10
irq_thread_fn+0x1f/0x60
irq_thread+0xea/0x1a0
? preempt_count_add+0x6a/0xa0
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
kthread+0xe9/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
[joro: Edit commit message] |
| BleachBit cleans files to free disk space and to maintain privacy. BleachBit for Windows up to version 4.6.2 is vulnerable to a DLL Hijacking vulnerability. By placing a malicious DLL with the name uuid.dll in the folder C:\Users\<username>\AppData\Local\Microsoft\WindowsApps\, an attacker can execute arbitrary code every time BleachBit is run. This issue has been patched in version 4.9.0. |
| Missing Authorization vulnerability in Galleryape Gallery Images Ape allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Gallery Images Ape: from n/a through 2.2.8. |
| Zohocorp ManageEngine Analytics Plus versions before 5410 and Zoho Analytics On-Premise versions before 5410 are vulnerable to Path traversal. |
| A vulnerability was found in 云课网络科技有限公司 Yunke Online School System up to 3.0.6. It has been declared as problematic. This vulnerability affects the function downfile of the file application/admin/controller/Appadmin.php. The manipulation of the argument url leads to path traversal. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| Flatnotes <v5.3.1 is vulnerable to denial of service through the upload image function. |
| A transient execution vulnerability in some AMD processors may allow a user process to infer TSC_AUX even when such a read is disabled, potentially resulting in information leakage. |
| A sensitive information disclosure vulnerability exists in the error handling component of ATISoluciones CIGES Application version 2.15.6 and earlier. When certain unexpected conditions trigger unhandled exceptions, the application returns detailed error messages and stack traces to the client. This may expose internal filesystem paths, SQL queries, database connection details, or environment configuration data to remote unauthenticated attackers. This issue allows information gathering and reconnaissance but does not enable direct system compromise. |
| FMS developed by Otsuka Information Technology has a Reflected Cross-site Scripting vulnerability, allowing unauthenticated remote attackers to execute arbitrary JavaScript codes in user's browser through phishing attacks. |
| Sensitive information disclosure due to insecure folder permissions. The following products are affected: Acronis True Image (Windows) before build 41736, Acronis True Image OEM (Windows) before build 42575. |
| CDG-Server-V5.6.2.126.139 and earlier was discovered to contain a SQL injection vulnerability via the permissionId parameter in CDGTempPermissions. |
| Some endpoints in vulnerability-lookup that modified
application state (e.g. changing database entries, user data,
configurations, or other privileged actions) may have been accessible
via HTTP GET requests without requiring a CSRF token. This flaw leaves
the application vulnerable to Cross-Site Request Forgery (CSRF) attacks:
an attacker who tricks a logged-in user into visiting a malicious
website could cause the user’s browser to issue GET requests that
perform unintended state-changing operations in the context of their
authenticated session.
Because the server would treat these GET requests as valid (since no
CSRF protection or POST method enforcement was in place), the attacker
could exploit this to escalate privileges, change settings, or carry out
other unauthorized actions without needing the user’s explicit consent
or awareness.
The fix ensures that all state-changing endpoints now require HTTP POST
requests and include a valid CSRF token. This enforces that state
changes cannot be triggered by arbitrary cross-site GET requests. This issue affects Vulnerability-Lookup: before 2.18.0. |
