| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in Tenda W12 3.0.0.7(4763). The affected element is the function set_local_time_0 of the file /bin/httpd. Such manipulation of the argument Time leads to stack-based buffer overflow. The attack can be launched remotely. The exploit is publicly available and might be used. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix oob access in cgroup local storage
Lonial reported that an out-of-bounds access in cgroup local storage
can be crafted via tail calls. Given two programs each utilizing a
cgroup local storage with a different value size, and one program
doing a tail call into the other. The verifier will validate each of
the indivial programs just fine. However, in the runtime context
the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the
BPF program as well as any cgroup local storage flavor the program
uses. Helpers such as bpf_get_local_storage() pick this up from the
runtime context:
ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx);
storage = ctx->prog_item->cgroup_storage[stype];
if (stype == BPF_CGROUP_STORAGE_SHARED)
ptr = &READ_ONCE(storage->buf)->data[0];
else
ptr = this_cpu_ptr(storage->percpu_buf);
For the second program which was called from the originally attached
one, this means bpf_get_local_storage() will pick up the former
program's map, not its own. With mismatching sizes, this can result
in an unintended out-of-bounds access.
To fix this issue, we need to extend bpf_map_owner with an array of
storage_cookie[] to match on i) the exact maps from the original
program if the second program was using bpf_get_local_storage(), or
ii) allow the tail call combination if the second program was not
using any of the cgroup local storage maps. |
| A vulnerability was detected in D-Link DI-8400 up to 16.07.26A1. This affects an unknown function of the file /dbsrv.asp. Performing a manipulation of the argument str results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. The initial researcher advisory mentions contradicting parameter names to be affected. |
| A flaw was found in libsolv. A stack-based buffer overflow vulnerability exists in the PGP verification component due to incorrect length handling when copying EdDSA 's' MPI into a stack buffer. A remote attacker could craft a malicious Ed25519 PGP signature with mismatched MPI lengths. Processing this crafted signature could lead to a denial of service in automated package or repository processing workflows. |
| Buffer Overflow vulnerability in arendst Tasmota v.15.3.0.3 and before allows a remote attacker to execute arbitrary code via the tasmota/tasmota_xdrv_driver/xdrv_10_scripter.ino, fetch_jpg() function. |
| Buffer Overflow vulnerability in arendst Tasmota v.15.3.0.3 and before allows a remote attacker to execute arbitrary code via the xdrv_10_scripter.ino, fetch_jpg(), jpg_task.boundary[40], strcpy() function. |
| An issue in fetch_jpg() in xdrv_10_scripter.ino in Tasmota through 15.3.0.3 allows a remote attacker to cause heap buffer overflow. The Content-Length from a JPEG stream is stored in a uint16_t variable; values above 65535 wrap around, causing allocation of a smaller buffer than the data actually read. |
| Heap buffer overflow vulnerability in libjxl 0.12.0 via crafted PBM images to the jxl::extras::DecodeImagePNM function in file lib/extras/dec/pnm.cc. |
| Versions of the package json-2-csv from 3.15.0 and before 5.5.11 are vulnerable to CSV Injection via the preventCsvInjection option which can be bypassed. An attacker can inject formulas into CSV files, which execute when the files are opened in spreadsheet applications. |
| Free MP3 CD Ripper 2.8 contains a stack-based buffer overflow vulnerability in WMA file processing that allows local attackers to bypass DEP protection via structured exception handling manipulation. Attackers can craft a malicious WMA file that triggers the overflow when loaded through the Convert function, enabling execution of arbitrary code through ROP chain gadgets and shellcode injection. |
| Lakeside SysTrack Agent versions prior to 11.2.1.28, 11.3.0.38, 11.4.0.24, 11.5.0.15 contain an out-of-bounds read vulnerability in the Command ID 30 UDP packet handler that allows remote attackers to crash the application by sending a specially crafted UDP packet. Attackers can send a malformed packet with an invalid memory address at offset 0x4 in the payload to trigger an access violation and cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: Prevent OOB reads when parsing IB
Rewrite the IB parsing to use amdgpu_ib_get_value() which handles the
bounds checks. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt
hci_le_create_big_complete_evt() iterates over BT_BOUND connections for
a BIG handle using a while loop, accessing ev->bis_handle[i++] on each
iteration. However, there is no check that i stays within ev->num_bis
before the array access.
When a controller sends a LE_Create_BIG_Complete event with fewer
bis_handle entries than there are BT_BOUND connections for that BIG,
or with num_bis=0, the loop reads beyond the valid bis_handle[] flex
array into adjacent heap memory. Since the out-of-bounds values
typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()
rejects them and the connection remains in BT_BOUND state. The same
connection is then found again by hci_conn_hash_lookup_big_state(),
creating an infinite loop with hci_dev_lock held.
Fix this by terminating the BIG if in case not all BIS could be setup
properly. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss()
Sashiko points out that the user can specify WQs sharing the same CQ as a
part of the uAPI and this will trigger the WARN_ON() then go on to corrupt
the kernel.
Just reject it outright and fail the QP creation. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix rxkad crypto unalignment handling
Fix handling of a packet with a misaligned crypto length. Also handle
non-ENOMEM errors from decryption by aborting. Further, remove the
WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can
still be emitted). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send
ib_uverbs_post_send() uses cmd.wqe_size from userspace without any
validation before passing it to kmalloc() and using the allocated
buffer as struct ib_uverbs_send_wr.
If a user provides a small wqe_size value (e.g., 1), kmalloc() will
succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge,
and other fields will read beyond the allocated buffer, resulting in
an out-of-bounds read from kernel heap memory. This could potentially
leak sensitive kernel information to userspace.
Additionally, providing an excessively large wqe_size can trigger a
WARNING in the memory allocation path, as reported by syzkaller.
This is inconsistent with ib_uverbs_unmarshall_recv() which properly
validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before
proceeding.
Add the same validation for ib_uverbs_post_send() to ensure wqe_size
is at least sizeof(struct ib_uverbs_send_wr). |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path. |
| tif_predict.h and tif_predict.c in libtiff 4.0.6 have assertions that can lead to assertion failures in debug mode, or buffer overflows in release mode, when dealing with unusual tile size like YCbCr with subsampling. Reported as MSVR 35105, aka "Predictor heap-buffer-overflow." |
| The (1) roaming_read and (2) roaming_write functions in roaming_common.c in the client in OpenSSH 5.x, 6.x, and 7.x before 7.1p2, when certain proxy and forward options are enabled, do not properly maintain connection file descriptors, which allows remote servers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact by requesting many forwardings. |
| A buffer overflow exists in the Brotli library versions prior to 1.0.8 where an attacker controlling the input length of a "one-shot" decompression request to a script can trigger a crash, which happens when copying over chunks of data larger than 2 GiB. It is recommended to update your Brotli library to 1.0.8 or later. If one cannot update, we recommend to use the "streaming" API as opposed to the "one-shot" API, and impose chunk size limits. |
