Export limit exceeded: 378307 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378307 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72155 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: swp: Improve locking user experience In the case of the first block being locked (or the few first blocks), if the user want to fully unlock the device it has two possibilities: - either it asks to unlock the entire device, and this works; - or it asks to unlock just the block(s) that are currently locked, which fails. It fails because the conditions "can_be_top" and "can_be_bottom" are true. Indeed, in this case, we unlock everything, so the TB bit does not matter. However in the current implementation, use_top would be true (as this is the favourite option) and lock_len, which in practice should be reduced down to 0, is set to "nor->params->size - (ofs + len)" which is a positive number. This is wrong. An easy way is to simply add an extra condition. In the unlock() path, if we can achieve the same result from both sides, it means we unlock everything and lock_len must simply be 0. A comment is added to clarify that logic. | ||||
| CVE-2026-72154 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: Fix jump_label smp syncing The original commit 8c30b0018f9d ("openrisc: Add jump label support") copies from arm64 and does not properly consider how icache invalidation on remote cores works in OpenRISC. On OpenRISC remote icaches need to be invalidated otherwise static key's may remain state after updating. Fix SMP cache syncing by: 1. Properly invalidate remote core icaches on SMP systems by using icache_all_inv. The old code uses kick_all_cpus_sync() which runs a no-op IPI function call on remote CPU's which does execute a lot of code and flushes many cache lines in the process, but does not flush all and it's not correct on OpenRISC. 2. For architectures that do not have WRITETHROUGH caches be sure to flush the dcache after patching. To test this I first reproduced the issue using a custom test module [0]. The test confirmed that some icache lines maintained stale static_key code sequences after calling static_branch_enable(). After this patch there are no longer jump_label coherency issues. [0] https://github.com/stffrdhrn/or1k-utils/tree/master/tests/smp_static_key_test | ||||
| CVE-2026-72151 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tpm: tpm2-sessions: wait for async KPP completion in tpm_buf_append_salt tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret() without installing a completion callback, discards both return values, and immediately frees the kpp_request via kpp_request_free(). When the resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE, keembay-ocs), either operation returns -EINPROGRESS and the deferred completion worker dereferences the freed request. The path fires automatically from the hwrng_fillfn kernel thread via tpm_get_random -> tpm2_get_random -> tpm2_start_auth_session -> tpm_buf_append_salt on every entropy poll, without any userland action. Install crypto_req_done as the completion callback, wrap both KPP operations in crypto_wait_req(), and propagate errors to the caller. The wait is a no-op for synchronous backends. | ||||
| CVE-2026-72150 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix uninitialized xprt_create_args structure The xprt_create_args structure is allocated on the stack without initialization in rpc_sysfs_xprt_switch_add_xprt_store(). While some fields are manually populated, critical fields like srcaddr, bc_xps, and flags contain uninitialized stack garbage. This can lead to: 1. Kernel panic when xs_setup_xprt() dereferences garbage srcaddr 2. Information leak if srcaddr points to sensitive stack data 3. Unpredictable behavior if flags has random bits set The fix is to zero-initialize the structure to ensure all unused fields are NULL/0, preventing the transport setup code from acting on garbage data. | ||||
| CVE-2026-72149 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra: Fix burst size calculation Currently, the Tegra GPC DMA hardware requires the transfer length to be a multiple of the max burst size configured for the channel. When a client requests a transfer where the length is not evenly divisible by the configured max burst size, the DMA hangs with partial burst at the end. Fix this by reducing the burst size to the largest power-of-2 value that evenly divides the transfer length. For example, a 40-byte transfer with a 16-byte max burst will now use an 8-byte burst (40 / 8 = 5 complete bursts) instead of causing a hang. This issue was observed with the PL011 UART driver where TX DMA transfers of arbitrary lengths were stuck. | ||||
| CVE-2026-72147 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma-pcie: Reject devices without driver data dw_edma_pcie_probe() treats the PCI device ID driver_data as the template for the controller layout and copies it unconditionally. A device bound dynamically via sysfs can match the driver without that data, which leads to a NULL pointer dereference. Reject such matches before enabling the device. | ||||
| CVE-2026-72146 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: sh: rz-dmac: Move interrupt request after everything is set up Once the interrupt is requested, the interrupt handler may run immediately. Since the IRQ handler can access channel->ch_base, which is initialized only after requesting the IRQ, this may lead to invalid memory access. Likewise, the IRQ thread may access uninitialized data (the ld_free, ld_queue, and ld_active lists), which may also lead to issues. Request the interrupts only after everything is set up. To keep the error path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent(). | ||||
| CVE-2026-72145 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/tpmi: use cleanup helpers in mem_write() In mem_write(), the temporary array returned by parse_int_array_user() must be released on all exit paths. Convert the array variable to use cleanup.h scope-based cleanup so it is freed automatically on return. This also moves the array declaration next to parse_int_array_user() as required by cleanup.h usage guidelines. | ||||
| CVE-2026-72144 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill. | ||||
| CVE-2026-72143 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Restore SST-PP control to all domains The SST-PP control offset is only restored to power domain 0 after resume. During suspend, control values are read and stored for all power domains. Use pd_info->sst_base instead of power_domain_info->sst_base, which only points to power domain 0 base address. | ||||
| CVE-2026-72139 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: defer md5sig_info kfree past RCU grace period in tcp_connect The md5+ao reconciliation in tcp_connect() (net/ipv4/tcp_output.c) has two symmetric branches: if (needs_md5) { tcp_ao_destroy_sock(sk, false); } else if (needs_ao) { tcp_clear_md5_list(sk); kfree(rcu_replace_pointer(tp->md5sig_info, NULL, ...)); } Both branches free a per-socket auth-info object while the socket is in TCP_SYN_SENT and is already on the inet ehash (inserted by inet_hash_connect() in tcp_v4_connect()). Both branches are reachable by softirq RX-path readers that load the corresponding info pointer via implicit RCU before bh_lock_sock_nested() is taken. The needs_md5 branch is fixed in the prior patch by re-introducing the call_rcu() free in tcp_ao_destroy_sock(): the equivalent per-key loop runs inside tcp_ao_info_free_rcu(), the RCU callback, so by the time it frees each tcp_ao_key all softirq readers that captured the container have already completed rcu_read_unlock(). The needs_ao branch is not symmetric in the same way. The container free can be deferred via kfree_rcu(md5sig, rcu) -- struct tcp_md5sig_info already has the required rcu member (include/net/tcp.h:1999-2002), and the rest of the tree already does this in the tcp_md5sig_info_add() rollback paths (net/ipv4/tcp_ipv4.c:1410, 1436). But the per-key teardown is done by tcp_clear_md5_list() in process context BEFORE the container's RCU grace period: it walks &md5sig->head and frees each tcp_md5sig_key with bare hlist_del + kfree. A concurrent softirq reader in __tcp_md5_do_lookup() / __tcp_md5_do_lookup_exact() (tcp_ipv4.c:1253, 1298) walks the same list via hlist_for_each_entry_rcu() and races with that bare kfree on the keys themselves -- a per-key slab use-after-free of the same class as the TCP-AO bug, on the same race window. Fix this in two halves: 1. Convert the bare kfree() in tcp_connect() to kfree_rcu() so the md5sig_info container joins the rest of the md5sig lifecycle. The local-variable lift is mechanical and required because kfree_rcu() is a macro that expects an lvalue. 2. Make tcp_clear_md5_list() RCU-safe by replacing hlist_del + kfree(key) with hlist_del_rcu + kfree_rcu(key, rcu). struct tcp_md5sig_key already carries the rcu member (include/net/tcp.h:1995) and tcp_md5_do_del() (net/ipv4/tcp_ipv4.c:1456) already uses kfree_rcu, so this restores the lifecycle invariant the rest of the file follows rather than introducing a one-off. The other caller of tcp_clear_md5_list() is tcp_md5_destruct_sock() (net/ipv4/tcp.c:412), which runs from the sock destructor when the socket is already unhashed and unreachable; the extra grace period there is unnecessary but harmless. Making the helper unconditionally RCU-safe is the cleaner contract. The needs_ao branch is not reachable by the userns reproducer used to demonstrate the AO-side splat (the repro installs both keys but ends up in the needs_md5 branch because the connect peer matches the MD5 key, not the AO key); however the symmetric race exists and a maintainer touching this code should not have to think about which branch escapes RCU and which one does not. [also credits to Qihang, who found that this races with tcp-diag] | ||||
| CVE-2026-72137 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: nat_keepalive: avoid double free on send error nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6 send helper reports an error. That cleanup is only correct before the skb is handed to the output path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the networking stack may already have consumed the skb before returning an error, so freeing it again is unsafe. Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4() and nat_keepalive_send_ipv6(), where the caller still owns the skb, and keep nat_keepalive_send() responsible only for family dispatch and the unsupported-family cleanup path. | ||||
| CVE-2026-72136 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72133 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ. | ||||
| CVE-2026-72129 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()). | ||||
| CVE-2026-72127 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace. | ||||
| CVE-2026-72126 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(), therefore make isotp_release() always call synchronize_rcu() before cancelling the timers, regardless of so->bound. This still closes the original race (isotp_notify() clearing so->bound without waiting for in-flight isotp_rcv() callers before isotp_release() cancels the RX timer) without adding any RCU wait to the netdevice notifier path. | ||||
| CVE-2026-72125 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER isotp_release() looked up the bound network device via dev_get_by_index() using the stored ifindex. During device unregistration the device is unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier chain runs, so a concurrent isotp_release() could find no device, skip can_rx_unregister() entirely, and still proceed to free the socket. Since isotp_release() had already removed itself from the isotp notifier list at that point, isotp_notify() would never get a chance to clean up either, leaving a stale CAN filter that keeps pointing at the freed socket. Fix this the same way raw.c already does: hold a tracked reference to the bound net_device in the socket (so->dev/so->dev_tracker) from bind() onward instead of re-resolving it from the ifindex, and serialize bind()/release() with rtnl_lock() so that so->dev is always consistent with what the NETDEV_UNREGISTER notifier sees. so->dev stays valid regardless of ifindex-hash unlisting, and is only ever cleared by whichever of isotp_release()/isotp_notify() gets there first, so the filter is always removed exactly once. isotp_bind() now rejects a (re)bind with -EAGAIN while so->[tx|rx].state isn't ISOTP_IDLE yet, so a timer left running by a prior NETDEV_UNREGISTER can't act on a newly bound so->ifindex. Both checks share the same lock_sock() section, so there is no window in which a concurrent isotp_notify() clearing so->bound could be missed. | ||||
| CVE-2026-72124 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. | ||||
| CVE-2026-72122 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its write sites. Also fix bcm_rx_setup() silently returning success when the target device disappears concurrently instead of reporting -ENODEV, so a broken RX op is no longer left registered as if it had succeeded. | ||||