| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds write in libsthmbc.so prior to One UI 8.5 allows local attackers to write out-of-bounds memory. |
| Certain KGUARD DVR devices running vulnerable firmware expose a system command execution service on all network interfaces without requiring authentication. A remote unauthenticated attacker with network access to the affected service can execute arbitrary system commands on the device, potentially resulting in complete compromise of the DVR.
The vulnerability is known to have been exploited in the wild by the Mirai_ptea (Rimasuta) and Mirai_aurora botnets for malware propagation and subsequent DDoS activity. The vulnerability was reported to affect firmware dating from 2016, while firmware released after 2017 appears to mitigate the issue by restricting the affected service to the localhost interface (127.0.0.1) instead of exposing it on all interfaces (0.0.0.0).
The affected-device list reported by Netlab includes many D1004NR, D1008NR, D1016NR, D1104, D1104NR, D1108NR, D1116NR, D1132NR, D2116NR, D97xx, D98xx, and D99xx variants and several associated hardware revisions
The exploit is included in some version of rapperbot and exploited in 2026. This assignment has been made to document the active exploitation and lack of documentation from the vendor. |
| A stack-based buffer overflow vulnerability exists in the Bosch Sensortec BHI360 SensorAPI(C-Library) in versions up to and including commit d6b200416a.
The vulnerability is located within the FIFO parsing and debug logging subsystem inside the function bhi360_parse_debug_message() in bhi360_parse.c (lines 1852-1875).
The parser trusts the first payload byte of a debug frame as the message length (msg_length) and copies that many bytes into a fixed-size 17-byte stack buffer (debug_msg) via memcpy without performing any bounds checking.
A locally or physically positioned attacker (e.g., via a malicious sensor, counterfeit hardware module, or a Man-in-the-Middle on the communication bus) can exploit this vulnerability by injecting a crafted debug frame with a length byte exceeding 16.
This corrupts adjacent stack data, including the saved return address.
Furthermore, because the overflowed buffer is subsequently passed to a printf-style logging sink, the attacker can supply format string specifiers (e.g., %n) to execute arbitrary code on the host microcontroller/SoC or cause a reliable system crash (Denial of Service). |
| A stack-based buffer overflow vulnerability exists in the Bosch Sensortec BHI385 SensorAPI (C library) within the debug message parser function bhi385_parse_debug_message (located in bhi385_parse.c).
The function parses FIFO events and extracts an 8-bit message length directly from the attacker-controlled event payload (callback_info->data_ptr[0]) without enforcing bounds checks or clamping the value.
When copying the payload into a fixed-size stack buffer of 17 bytes (uint8_t debug_msg[17]) via memcpy, providing a length byte greater than 16 causes the function to write past the allocated stack boundary.
This memory corruption can be triggered by a malicious or compromised sensor or bus participant, leading to a firmware crash, Denial of Service (DoS), or potentially the execution of arbitrary code via adjacent stack data corruption. |
| An out-of-bounds read vulnerability was discovered in the Bosch BME690 SensorAPI (C-driver) in version v1.0.3 and prior, specifically within the field data parsing logic in read_all_field_data (bme69x.c).
The driver prefetches heater configuration registers into a contiguous 30-byte stack buffer (set_val) mapping IDAC, RES_HEAT, and GAS_WAIT tables.
When parsing sensor field data, the gas_index is extracted using a 4-bit mask (0..15) but lacks boundary verification against the valid range (0..9).
An attacker or a compromised peripheral mimicking a sensor on the I2C/SPI bus could return a payload with a gas index value of 10 or higher.
This causes the driver to perform an out-of-bounds array access (set_val[20 + gas_index]), reading up to 6 bytes past the stack buffer.
The leaked out-of-bounds byte is then written into the public gas_wait field, which may lead to measurement corruption or leak adjacent stack memory when telemetered or logged. |
| A heap-based buffer overflow vulnerability in the PC bridge protocol decoder of BoschSensortec COINES_SDK (versions 2.10 through 2.12.2) allows attackers to cause a denial of service (process crash) or potentially execute arbitrary code.
The bridge decoder ({{bridge_decoder.c}}) trusts the packet length field provided by the external device and forwards it to the host response queue ({{mqueue_add_data}}) without validating the bounds of the destination buffer.
A malicious or compromised USB or Bluetooth Low Energy (BLE) peripheral can advertise a payload size up to ~3 KB, which exceeds the default queue slot size of 255 bytes.
This results in an unbounded heap overwrite ({{memcpy}}), corrupting adjacent heap metadata on the host system when processing the device's response. |
| An issue was discovered in Bosch Sensortec COINES_SDK versions 2.0 through 2.11.
The host streaming API function {{coines_read_stream_sensor_data()}} fails to validate the boundaries of the caller-provided destination buffer.
Internally, the stream processing mechanism in {{comm_intf_process_stream_response()}} discards the requested {{number_of_samples}} argument and copies the entirety of the streaming ring buffer's accumulated data into {{coines_stream_rsp_buf}}.
Subsequently, {{coines_read_stream_sensor_data()}} unconditionally executes a {{memcpy}} of the ring buffer size into the caller-provided buffer without verifying if the destination memory allocation is large enough.
A malicious or compromised hardware board connected via USB or BLE can exploit this by streaming a high volume of sensor samples, causing a heap or stack-based buffer overflow on the host desktop environment.
This can result in a Denial of Service (DoS) or potential arbitrary code execution on the host machine. |
| There is an Improper Encryption Configuration Vulnerability in some Hikvision Intercom Products. This could allow attackers to forge M1 cards. |
| In the silabser.sys driver for CP210x devices v11.5.0 and earlier, a local unprivileged user with a malicious device can use malformed packets to leak up to 145 bytes of uninitialized kernel pool memory. This vulnerability affects Windows 10 and earlier. |
| In the silabser.sys driver for CP210x devices v11.5.0 and earlier, a local unprivileged user with a malicious device can use malformed packets to corrupt kernel pool memory, resulting in arbitrary code execution with escalated privileges. |
| A missing
authentication vulnerability in the VPN configuration management has been
identified in Archer MR600 (v2, v3 & v5) and TL-MR6400 v8 due to improper access control; a remote unauthenticated attacker
may be able to access and modify VPN configuration information without valid
credentials.
Successful
exploitation may allow a remote unauthenticated attacker to disclose and modify
VPN configuration information. |
| Netskope was notified of an out-of-bounds heap read affecting the Endpoint DLP (EPDLP) service of the Netskope Client. A local standard user could potentially send a specially crafted message that is not properly validated with a bounds check, likely crashing the kernel driver handler. Successful exploitation could potentially crash the EPDLP service, temporarily interrupting DLP enforcement. A successful exploit could potentially also reveal per-boot memory layout information to unauthorized users. |
| Netskope was notified about a potential gap in Netskope Endpoint DLP (EPDLP) running on Windows systems. Successful exploitation of the gap could potentially allow a privileged user to send a crafted message to the EPDLP process port to trigger an integer overflow, leading to memory corruption. Successful exploitation would require the EPDLP module to be enabled in the client configuration, and that Memory Integrity is disabled. A successful exploit could potentially result in a denial-of-service, arbitrary code execution, or privilege escalation on the local machine. |
| A heap-based buffer overflow vulnerability in the WS-Addressing Action transformation function in the Sofia IPC daemon in Xiongmai IP Camera XM530 firmware HMT.CM2005-v220608.1837 and earlier allows remote unauthenticated attackers to cause a denial of service or potentially execute arbitrary code via a crafted SOAP request containing a wsa5:Action string exceeding 128 bytes. |
| Authentication bypass using an alternate path or channel and Improper validation of syntactic correctness of input vulnerability in Brainzcompany Zenius EMS 8.0 allows Remote Code Inclusion.
This issue affects Zenius EMS 8.0: through OAM (Build 109). |
| libp2p-rendezvous through 0.17.1 fails to validate registration TTL values in discovery responses, allowing attackers to trigger timer arithmetic overflow. A malicious rendezvous server can send a discovery response with an unbounded TTL value that causes the client node process to panic when computing the expiry timer. |
| A flaw was found in `multipathd`. A local attacker with access to the `multipathd` UNIX control socket can exploit this vulnerability by sending valid commands and then ceasing to read replies. This action can cause the `multipathd` listener thread to block, leading to a Denial of Service (DoS) where legitimate Inter-Process Communication (IPC) operations may hang or time out. This issue does not result in privilege escalation, arbitrary code execution, or impact data confidentiality or integrity. |
| Out-of-bounds read vulnerability in Citirx Workspace app for Windows.
This issue affects Workspace app for Windows: before 2603.11 Current Release (CR), before 2507.1 LTSR CU3, and before LTSR 2607. |
| GeoVision GV-LPC2211 V1.13 fails to limit repeated User elements in ONVIF SetUser requests, allowing an authenticated administrator to overwrite stack control state and crash the ONVIF worker. |
| Headroom compresses data before the data reaches a large language model. Prior to version 0.35.0, the Headroom WebSocket server does not validate the `Origin` header of incoming client WebSocket requests before forwarding the request to the upstream server, allowing malicious WebSocket clients to perform arbitrary LLM requests without authentication. This can be exploited by a malicious WebSocket client executed in a traditional or headless browser such as lightpanda, if the browser has access to the Headroom proxy and the OpenAI API key is stored in the `OPENAI_API_KEY` environment variable. Version 0.35.0 fixes the issue. |
