| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Apache ActiveMQ Artemis allows access to diagnostic information and controls through MBeans, which are also exposed through the authenticated Jolokia endpoint. Before version 2.29.0, this also included the Log4J2 MBean. This MBean is not meant for exposure to non-administrative users. This could eventually allow an authenticated attacker to write arbitrary files to the filesystem and indirectly achieve RCE.
Users are recommended to upgrade to version 2.29.0 or later, which fixes the issue. |
| A vulnerability exists in Apache ActiveMQ Artemis whereby a user with the createDurableQueue or createNonDurableQueue permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. When combined with the send permission and automatic queue creation a user could successfully send a message with a routing-type not supported by the address when that message should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address.
This issue affects Apache ActiveMQ Artemis from 2.0.0 through 2.39.0.
Users are recommended to upgrade to version 2.40.0 which fixes the issue. |
| A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file. |
| Missing Authentication for Critical Function (CWE-306) vulnerability in Apache Artemis, Apache ActiveMQ Artemis. An unauthenticated remote attacker can use the Core protocol to force a target broker to establish an outbound Core federation connection to an attacker-controlled rogue broker. This could potentially result in message injection into any queue and/or message exfiltration from any queue via the rogue broker. This impacts environments that allow both:
- incoming Core protocol connections from untrusted sources to the broker
- outgoing Core protocol connections from the broker to untrusted targets
This issue affects:
- Apache Artemis from 2.50.0 through 2.51.0
- Apache ActiveMQ Artemis from 2.11.0 through 2.44.0.
Users are recommended to upgrade to Apache Artemis version 2.52.0, which fixes the issue.
The issue can be mitigated by one of the following:
- Remove Core protocol support from any acceptor receiving connections from untrusted sources. Incoming Core protocol connections are supported by default via the "artemis" acceptor listening on port 61616. See the "protocols" URL parameter configured for the acceptor. An acceptor URL without this parameter supports all protocols by default, including Core.
- Use two-way SSL (i.e. certificate-based authentication) in order to force every client to present the proper SSL certificate when establishing a connection before any message protocol handshake is attempted. This will prevent unauthenticated exploitation of this vulnerability.
- Implement and deploy a Core interceptor to deny all Core downstream federation connect packets. Such packets have a type of (int) -16 or (byte) 0xfffffff0. Documentation for interceptors is available at https://artemis.apache.org/components/artemis/documentation/latest/intercepting-operations.html . |
| Incorrect Authorization (CWE-863) vulnerability in Apache Artemis, Apache ActiveMQ Artemis exists when an application using the OpenWire protocol attempts to create a non-durable JMS topic subscription on an address that doesn't exist with an authenticated user which has the "createDurableQueue" permission but does not have the "createAddress" permission and address auto-creation is disabled. In this circumstance, a temporary address will be created whereas the attempt to create the non-durable subscription should instead fail since the user is not authorized to create the corresponding address. When the OpenWire connection is closed the address is removed.
This issue affects Apache Artemis: from 2.50.0 through 2.52.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.53.0, which fixes the issue. |
| A vulnerability exists in Apache Artemis whereby an application using the STOMP protocol with security credentials that grant either the consume or send permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. A user could successfully send a message to an address or consume a message from a queue with a routing-type not supported by the corresponding address when that operation should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address. Even though the user was already granted permission to send and/or consume messages, they should not be able to augment the routing-type of the address without the createAddress permission.
This issue affects Apache Artemis: from 2.50.0 through 2.53.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.54.0, which fixes the issue. |
| Discourse is an open-source discussion platform. From versions 2026.1.0-latest to before 2026.1.4, 2026.3.0-latest to before 2026.3.1, and 2026.4.0-latest to before 2026.4.1, GroupPostSerializer declared include_user_long_name? as the predicate for its :name attribute, but AMS looks for include_name?. The misnamed predicate was never called, so object.user.name was always serialized regardless of SiteSetting.enable_names. This issue has been patched in versions 2026.1.4, 2026.3.1, 2026.4.1, and 2026.5.0-latest.1. |
| Kitty is a cross-platform GPU based terminal. In versions 0.47.0 and 0.47.1, `kitten dnd` can allow a malicious remote drag-and-drop source to overwrite or truncate arbitrary files writable by the local kitty user. Remote `text/uri-list` drops are staged in a temporary directory, but on case-sensitive filesystems duplicate remote basenames are not de-duplicated. An attacker can first create a staged symlink and then send a same-name regular-file entry. The regular-file write uses `utils.CreateAt()` / `openat(O_RDWR|O_CREAT|O_TRUNC)` without `O_NOFOLLOW`, so it follows the attacker-created symlink and writes outside the staging directory before final overwrite confirmation runs. This appears related in class to the file-transfer symlink advisory, but it is a different bug: it affects `kitten dnd` remote drag-and-drop staging, uses different vulnerable code (`kittens/dnd/drop.go` and `tools/utils/file_at_fd.go`), and reproduces on commit `4aa4a5c0567a92553a8c20a88a4352da637fca5d`, after the file-transfer `O_NOFOLLOW` fix. Version 0.47.2 patches the issue. |
| An incorrect authorization vulnerability in MISP allows an organization administrator to target site administrator accounts belonging to the same organization through the administrative email functionality. The affected code restricted organization administrators to users within their own organization, but did not exclude accounts assigned a site administrator role from recipient queries. As a result, an organization administrator could perform privileged account-management actions, such as initiating a password reset workflow, against a higher-privileged site administrator account in the same organization.
Successful exploitation may allow an authenticated organization administrator to interfere with or potentially take over a site administrator account, resulting in privilege escalation and full compromise of the MISP instance’s confidentiality, integrity, and availability.
Attack prerequisites:
The attacker must be authenticated as an organization administrator in the same organization as a site administrator account. |
| A weakness has been identified in CodeAstro Human Resource Management System 1.0. This vulnerability affects the function Invoice of the file \application\controllers\Payroll.php of the component Payroll Invoice Module. This manipulation of the argument ID causes sql injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. |
| OpenClaw before 2026.5.12 contains an exec denylist bypass vulnerability in the bundle MCP loopback session-spawn path that allows authenticated callers to bypass intended command restrictions. Attackers can reach the affected bundled MCP session-spawn path to start sessions with broader command reach than intended. |
| Subscriber Broken Access Control in Really Simple SSL <= 9.5.9 versions. |
| OpenClaw before 2026.4.26 contains an information disclosure vulnerability in sandboxed session spawning that exposes the real workspace path to child prompts. Attackers can exploit this by spawning child sessions from sandboxed parents to reveal host workspace location or related memory context to child models. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 0.20.0 to before version 2.0.10, an authenticated Nezha dashboard user can create or update a DDNS profile with provider webhook and configure an arbitrary webhook_url, HTTP method, request body, and headers. When DDNS is triggered for a server that uses that profile, the dashboard process sends the configured request with utils.HttpClient without the SSRF protections used by notification webhooks. This allows a low-privileged authenticated user who controls an owned server/DDNS profile to make the dashboard host issue HTTP requests to loopback or internal network services. The response body is not returned to the attacker in the confirmed path, so this is a blind SSRF / internal state-changing request primitive. This issue has been patched in version 2.0.10. |
| The LWS Optimize – All-in-One Speed Booster & Cache Tools plugin for WordPress is vulnerable to Arbitrary File Read in versions up to, and including, 3.3.19. This is due to the combine_current_css() function trusting <link rel="stylesheet" href="..."> values harvested from page HTML and converting same-site URLs to absolute filesystem paths before reading them with file_get_contents()/Minify\CSS::add(), without enforcing that the resolved path stay within ABSPATH or have a .css extension. This makes it possible for authenticated attackers, with Editor-level access and above, to read arbitrary files. |
| A race condition was found in the abrt-dbus D-Bus service's ChownProblemDir method. ChownProblemDir opens the dump directory with DD_OPEN_READONLY and calls dd_chown to change ownership of all files to the caller's uid, succeeding even while post-create event handlers hold a write lock. This allows an attacker to gain filesystem-level control of the dump directory while privileged event scripts are still running. |
| The Canvas plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'tag' parameter in all versions up to, and including, 2.5.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A security vulnerability has been detected in GL.iNet GL-MT3000 up to 4.4.5. Affected by this vulnerability is an unknown functionality of the file /usr/bin/one_click_upgrade of the component Online Firmware Upgrade Handler. Such manipulation leads to command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 4.7 addresses this issue. Upgrading the affected component is advised. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| OpenClaw before 2026.5.18 contains a policy enforcement vulnerability in system.run safe-bin allowlist validation that allows shell expansion to modify command interpretation on POSIX nodes. Authenticated operators can exploit shell metacharacters in approved commands to read unintended node-local files and expose sensitive configuration data. |
| A vulnerability has been found in Intelliants Subrion CMS up to 4.0.3. Affected by this issue is some unknown functionality of the component Blocks Endpoint. Such manipulation of the argument CSS class name leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
