Export limit exceeded: 47169 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20087 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54106 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fix potential memory leak in mlx5e_init_rep_rx The memory pointed to by the priv->rx_res pointer is not freed in the error path of mlx5e_init_rep_rx, which can lead to a memory leak. Fix by freeing the memory in the error path, thereby making the error path identical to mlx5e_cleanup_rep_rx(). | ||||
| CVE-2023-54105 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: check CAN address family in isotp_bind() Add missing check to block non-AF_CAN binds. Syzbot created some code which matched the right sockaddr struct size but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family field: bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10) ^^^^ This has no funtional impact but the userspace should be notified about the wrong address family field content. | ||||
| CVE-2023-54104 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op() 'op-cs' is copied in 'fun->mchip_number' which is used to access the 'mchip_offsets' and the 'rnb_gpio' arrays. These arrays have NAND_MAX_CHIPS elements, so the index must be below this limit. Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This would lead to out-of-bound accesses. | ||||
| CVE-2023-54102 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow A static code analysis tool flagged the possibility of buffer overflow when using copy_from_user() for a debugfs entry. Currently, it is possible that copy_from_user() copies more bytes than what would fit in the mybuf char array. Add a min() restriction check between sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect against buffer overflow. | ||||
| CVE-2023-54100 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix use after free bug in qedi_remove() In qedi_probe() we call __qedi_probe() which initializes &qedi->recovery_work with qedi_recovery_handler() and &qedi->board_disable_work with qedi_board_disable_work(). When qedi_schedule_recovery_handler() is called, schedule_delayed_work() will finally start the work. In qedi_remove(), which is called to remove the driver, the following sequence may be observed: Fix this by finishing the work before cleanup in qedi_remove(). CPU0 CPU1 |qedi_recovery_handler qedi_remove | __qedi_remove | iscsi_host_free | scsi_host_put | //free shost | |iscsi_host_for_each_session |//use qedi->shost Cancel recovery_work and board_disable_work in __qedi_remove(). | ||||
| CVE-2023-54131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: Fix memory leak when handling surveys When removing a rt2x00 device, its associated channel surveys are not freed, causing a memory leak observable with kmemleak: unreferenced object 0xffff9620f0881a00 (size 512): comm "systemd-udevd", pid 2290, jiffies 4294906974 (age 33.768s) hex dump (first 32 bytes): 70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD.............. 00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................ backtrace: [<ffffffffb0ed858b>] __kmalloc+0x4b/0x130 [<ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib] [<ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb] [<ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib] [<ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb] [<ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore] [<ffffffffb13be2d5>] really_probe+0x1a5/0x410 [<ffffffffb13be5c8>] __driver_probe_device+0x78/0x180 [<ffffffffb13be6fe>] driver_probe_device+0x1e/0x90 [<ffffffffb13be972>] __driver_attach+0xd2/0x1c0 [<ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0 [<ffffffffb13bd2a2>] bus_add_driver+0x112/0x210 [<ffffffffb13bfc6c>] driver_register+0x5c/0x120 [<ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore] [<ffffffffb0c011c4>] do_one_initcall+0x44/0x220 [<ffffffffb0d6134c>] do_init_module+0x4c/0x220 Fix this by freeing the channel surveys on device removal. Tested with a RT3070 based USB wireless adapter. | ||||
| CVE-2023-54099 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: Protect reconfiguration of sb read-write from racing writes The reconfigure / remount code takes a lot of effort to protect filesystem's reconfiguration code from racing writes on remounting read-only. However during remounting read-only filesystem to read-write mode userspace writes can start immediately once we clear SB_RDONLY flag. This is inconvenient for example for ext4 because we need to do some writes to the filesystem (such as preparation of quota files) before we can take userspace writes so we are clearing SB_RDONLY flag before we are fully ready to accept userpace writes and syzbot has found a way to exploit this [1]. Also as far as I'm reading the code the filesystem remount code was protected from racing writes in the legacy mount path by the mount's MNT_READONLY flag so this is relatively new problem. It is actually fairly easy to protect remount read-write from racing writes using sb->s_readonly_remount flag so let's just do that instead of having to workaround these races in the filesystem code. [1] https://lore.kernel.org/all/00000000000006a0df05f6667499@google.com/T/ | ||||
| CVE-2023-53692 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline Syzbot found the following issue: loop0: detected capacity change from 0 to 2048 EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none. ================================================================== BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 Read of size 4 at addr ffff888073644750 by task syz-executor420/5067 CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:306 print_report+0x107/0x1f0 mm/kasan/report.c:417 kasan_report+0xcd/0x100 mm/kasan/report.c:517 ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809 ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline] ext4_da_map_blocks fs/ext4/inode.c:1806 [inline] ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870 ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098 ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285 ext4_file_write_iter+0x1d0/0x18f0 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f4b7a9737b9 RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9 RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Above issue is happens when enable bigalloc and inline data feature. As commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for bigalloc + inline. But it only resolved issue when has inline data, if inline data has been converted to extent(ext4_da_convert_inline_data_to_extent) before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However i_data is still store inline data in this scene. Then will trigger UAF when find extent. To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)" in ext4_clu_mapped(). | ||||
| CVE-2025-39991 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load() If ab->fw.m3_data points to data, then fw pointer remains null. Further, if m3_mem is not allocated, then fw is dereferenced to be passed to ath11k_err function. Replace fw->size by m3_len. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2023-54133 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfp: clean mc addresses in application firmware when closing port When moving devices from one namespace to another, mc addresses are cleaned in software while not removed from application firmware. Thus the mc addresses are remained and will cause resource leak. Now use `__dev_mc_unsync` to clean mc addresses when closing port. | ||||
| CVE-2023-54135 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: maple_tree: fix potential out-of-bounds access in mas_wr_end_piv() Check the write offset end bounds before using it as the offset into the pivot array. This avoids a possible out-of-bounds access on the pivot array if the write extends to the last slot in the node, in which case the node maximum should be used as the end pivot. akpm: this doesn't affect any current callers, but new users of mapletree may encounter this problem if backported into earlier kernels, so let's fix it in -stable kernels in case of this. | ||||
| CVE-2023-54136 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: sprd: Fix DMA buffer leak issue Release DMA buffer when _probe() returns failure to avoid memory leak. | ||||
| CVE-2025-68191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: use netdev_warn() instead of netdev_WARN() netdev_WARN() uses WARN/WARN_ON to print a backtrace along with file and line information. In this case, udp_tunnel_nic_register() returning an error is just a failed operation, not a kernel bug. udp_tunnel_nic_register() can fail due to a memory allocation failure (kzalloc() or udp_tunnel_nic_alloc()). This is a normal runtime error and not a kernel bug. Replace netdev_WARN() with netdev_warn() accordingly. | ||||
| CVE-2023-53988 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix slab-out-of-bounds read in hdr_delete_de() Here is a BUG report from syzbot: BUG: KASAN: slab-out-of-bounds in hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806 Read of size 16842960 at addr ffff888079cc0600 by task syz-executor934/3631 Call Trace: memmove+0x25/0x60 mm/kasan/shadow.c:54 hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806 indx_delete_entry+0x74f/0x3670 fs/ntfs3/index.c:2193 ni_remove_name+0x27a/0x980 fs/ntfs3/frecord.c:2910 ntfs_unlink_inode+0x3d4/0x720 fs/ntfs3/inode.c:1712 ntfs_rename+0x41a/0xcb0 fs/ntfs3/namei.c:276 Before using the meta-data in struct INDEX_HDR, we need to check index header valid or not. Otherwise, the corruptedi (or malicious) fs image can cause out-of-bounds access which could make kernel panic. | ||||
| CVE-2023-54097 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: stm32-pwr: fix of_iomap leak Smatch reports: drivers/regulator/stm32-pwr.c:166 stm32_pwr_regulator_probe() warn: 'base' from of_iomap() not released on lines: 151,166. In stm32_pwr_regulator_probe(), base is not released when devm_kzalloc() fails to allocate memory or devm_regulator_register() fails to register a new regulator device, which may cause a leak. To fix this issue, replace of_iomap() with devm_platform_ioremap_resource(). devm_platform_ioremap_resource() is a specialized function for platform devices. It allows 'base' to be automatically released whether the probe function succeeds or fails. Besides, use IS_ERR(base) instead of !base as the return value of devm_platform_ioremap_resource() can either be a pointer to the remapped memory or an ERR_PTR() encoded error code if the operation fails. | ||||
| CVE-2023-54096 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: fix enumeration completion The soundwire subsystem uses two completion structures that allow drivers to wait for soundwire device to become enumerated on the bus and initialised by their drivers, respectively. The code implementing the signalling is currently broken as it does not signal all current and future waiters and also uses the wrong reinitialisation function, which can potentially lead to memory corruption if there are still waiters on the queue. Not signalling future waiters specifically breaks sound card probe deferrals as codec drivers can not tell that the soundwire device is already attached when being reprobed. Some codec runtime PM implementations suffer from similar problems as waiting for enumeration during resume can also timeout despite the device already having been enumerated. | ||||
| CVE-2023-53987 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ping: Fix potentail NULL deref for /proc/net/icmp. After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. | ||||
| CVE-2023-54094 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: prevent skb corruption on frag list segmentation Ian reported several skb corruptions triggered by rx-gro-list, collecting different oops alike: [ 62.624003] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 62.631083] #PF: supervisor read access in kernel mode [ 62.636312] #PF: error_code(0x0000) - not-present page [ 62.641541] PGD 0 P4D 0 [ 62.644174] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 62.648629] CPU: 1 PID: 913 Comm: napi/eno2-79 Not tainted 6.4.0 #364 [ 62.655162] Hardware name: Supermicro Super Server/A2SDi-12C-HLN4F, BIOS 1.7a 10/13/2022 [ 62.663344] RIP: 0010:__udp_gso_segment (./include/linux/skbuff.h:2858 ./include/linux/udp.h:23 net/ipv4/udp_offload.c:228 net/ipv4/udp_offload.c:261 net/ipv4/udp_offload.c:277) [ 62.687193] RSP: 0018:ffffbd3a83b4f868 EFLAGS: 00010246 [ 62.692515] RAX: 00000000000000ce RBX: 0000000000000000 RCX: 0000000000000000 [ 62.699743] RDX: ffffa124def8a000 RSI: 0000000000000079 RDI: ffffa125952a14d4 [ 62.706970] RBP: ffffa124def8a000 R08: 0000000000000022 R09: 00002000001558c9 [ 62.714199] R10: 0000000000000000 R11: 00000000be554639 R12: 00000000000000e2 [ 62.721426] R13: ffffa125952a1400 R14: ffffa125952a1400 R15: 00002000001558c9 [ 62.728654] FS: 0000000000000000(0000) GS:ffffa127efa40000(0000) knlGS:0000000000000000 [ 62.736852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 62.742702] CR2: 00000000000000c0 CR3: 00000001034b0000 CR4: 00000000003526e0 [ 62.749948] Call Trace: [ 62.752498] <TASK> [ 62.779267] inet_gso_segment (net/ipv4/af_inet.c:1398) [ 62.787605] skb_mac_gso_segment (net/core/gro.c:141) [ 62.791906] __skb_gso_segment (net/core/dev.c:3403 (discriminator 2)) [ 62.800492] validate_xmit_skb (./include/linux/netdevice.h:4862 net/core/dev.c:3659) [ 62.804695] validate_xmit_skb_list (net/core/dev.c:3710) [ 62.809158] sch_direct_xmit (net/sched/sch_generic.c:330) [ 62.813198] __dev_queue_xmit (net/core/dev.c:3805 net/core/dev.c:4210) net/netfilter/core.c:626) [ 62.821093] br_dev_queue_push_xmit (net/bridge/br_forward.c:55) [ 62.825652] maybe_deliver (net/bridge/br_forward.c:193) [ 62.829420] br_flood (net/bridge/br_forward.c:233) [ 62.832758] br_handle_frame_finish (net/bridge/br_input.c:215) [ 62.837403] br_handle_frame (net/bridge/br_input.c:298 net/bridge/br_input.c:416) [ 62.851417] __netif_receive_skb_core.constprop.0 (net/core/dev.c:5387) [ 62.866114] __netif_receive_skb_list_core (net/core/dev.c:5570) [ 62.871367] netif_receive_skb_list_internal (net/core/dev.c:5638 net/core/dev.c:5727) [ 62.876795] napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:434 ./include/net/gro.h:429 net/core/dev.c:6067) [ 62.881004] ixgbe_poll (drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3191) [ 62.893534] __napi_poll (net/core/dev.c:6498) [ 62.897133] napi_threaded_poll (./include/linux/netpoll.h:89 net/core/dev.c:6640) [ 62.905276] kthread (kernel/kthread.c:379) [ 62.913435] ret_from_fork (arch/x86/entry/entry_64.S:314) [ 62.917119] </TASK> In the critical scenario, rx-gro-list GRO-ed packets are fed, via a bridge, both to the local input path and to an egress device (tun). The segmentation of such packets unsafely writes to the cloned skbs with shared heads. This change addresses the issue by uncloning as needed the to-be-segmented skbs. | ||||
| CVE-2023-54092 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pv: fix index value of replaced ASCE The index field of the struct page corresponding to a guest ASCE should be 0. When replacing the ASCE in s390_replace_asce(), the index of the new ASCE should also be set to 0. Having the wrong index might lead to the wrong addresses being passed around when notifying pte invalidations, and eventually to validity intercepts (VM crash) if the prefix gets unmapped and the notifier gets called with the wrong address. | ||||
| CVE-2023-54139 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Ensure write index cannot be negative The write index indicates which event the data is for and accesses a per-file array. The index is passed by user processes during write() calls as the first 4 bytes. Ensure that it cannot be negative by returning -EINVAL to prevent out of bounds accesses. Update ftrace self-test to ensure this occurs properly. | ||||