| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: dlink: handle copy_thresh allocation failure
The driver did not handle failure of `netdev_alloc_skb_ip_align()`.
If the allocation failed, dereferencing `skb->protocol` could lead to
a NULL pointer dereference.
This patch tries to allocate `skb`. If the allocation fails, it falls
back to the normal path.
Tested-on: D-Link DGE-550T Rev-A3 |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: report devlink_port_type_warn source device
devlink_port_type_warn is scheduled for port devlink and warning
when the port type is not set. But from this warning it is not easy
found out which device (driver) has no devlink port set.
[ 3709.975552] Type was not set for devlink port.
[ 3709.975579] WARNING: CPU: 1 PID: 13092 at net/devlink/leftover.c:6775 devlink_port_type_warn+0x11/0x20
[ 3709.993967] Modules linked in: openvswitch nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nfnetlink bluetooth rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs vhost_net vhost vhost_iotlb tap tun bridge stp llc qrtr intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal mlx5_ib intel_powerclamp coretemp dell_wmi ledtrig_audio sparse_keymap ipmi_ssif kvm_intel ib_uverbs rfkill ib_core video kvm iTCO_wdt acpi_ipmi intel_vsec irqbypass ipmi_si iTCO_vendor_support dcdbas ipmi_devintf mei_me ipmi_msghandler rapl mei intel_cstate isst_if_mmio isst_if_mbox_pci dell_smbios intel_uncore isst_if_common i2c_i801 dell_wmi_descriptor wmi_bmof i2c_smbus intel_pch_thermal pcspkr acpi_power_meter xfs libcrc32c sd_mod sg nvme_tcp mgag200 i2c_algo_bit nvme_fabrics drm_shmem_helper drm_kms_helper nvme syscopyarea ahci sysfillrect sysimgblt nvme_core fb_sys_fops crct10dif_pclmul libahci mlx5_core sfc crc32_pclmul nvme_common drm
[ 3709.994030] crc32c_intel mtd t10_pi mlxfw libata tg3 mdio megaraid_sas psample ghash_clmulni_intel pci_hyperv_intf wmi dm_multipath sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse
[ 3710.108431] CPU: 1 PID: 13092 Comm: kworker/1:1 Kdump: loaded Not tainted 5.14.0-319.el9.x86_64 #1
[ 3710.108435] Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.8.2 09/14/2022
[ 3710.108437] Workqueue: events devlink_port_type_warn
[ 3710.108440] RIP: 0010:devlink_port_type_warn+0x11/0x20
[ 3710.108443] Code: 84 76 fe ff ff 48 c7 03 20 0e 1a ad 31 c0 e9 96 fd ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 48 c7 c7 18 24 4e ad e8 ef 71 62 ff <0f> 0b c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 87
[ 3710.108445] RSP: 0018:ff3b6d2e8b3c7e90 EFLAGS: 00010282
[ 3710.108447] RAX: 0000000000000000 RBX: ff366d6580127080 RCX: 0000000000000027
[ 3710.108448] RDX: 0000000000000027 RSI: 00000000ffff86de RDI: ff366d753f41f8c8
[ 3710.108449] RBP: ff366d658ff5a0c0 R08: ff366d753f41f8c0 R09: ff3b6d2e8b3c7e18
[ 3710.108450] R10: 0000000000000001 R11: 0000000000000023 R12: ff366d753f430600
[ 3710.108451] R13: ff366d753f436900 R14: 0000000000000000 R15: ff366d753f436905
[ 3710.108452] FS: 0000000000000000(0000) GS:ff366d753f400000(0000) knlGS:0000000000000000
[ 3710.108453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3710.108454] CR2: 00007f1c57bc74e0 CR3: 000000111d26a001 CR4: 0000000000773ee0
[ 3710.108456] PKRU: 55555554
[ 3710.108457] Call Trace:
[ 3710.108458] <TASK>
[ 3710.108459] process_one_work+0x1e2/0x3b0
[ 3710.108466] ? rescuer_thread+0x390/0x390
[ 3710.108468] worker_thread+0x50/0x3a0
[ 3710.108471] ? rescuer_thread+0x390/0x390
[ 3710.108473] kthread+0xdd/0x100
[ 3710.108477] ? kthread_complete_and_exit+0x20/0x20
[ 3710.108479] ret_from_fork+0x1f/0x30
[ 3710.108485] </TASK>
[ 3710.108486] ---[ end trace 1b4b23cd0c65d6a0 ]---
After patch:
[ 402.473064] ice 0000:41:00.0: Type was not set for devlink port.
[ 402.473064] ice 0000:41:00.1: Type was not set for devlink port. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF issue in f2fs_merge_page_bio()
As JY reported in bugzilla [1],
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : [0xffffffe51d249484] f2fs_is_cp_guaranteed+0x70/0x98
lr : [0xffffffe51d24adbc] f2fs_merge_page_bio+0x520/0x6d4
CPU: 3 UID: 0 PID: 6790 Comm: kworker/u16:3 Tainted: P B W OE 6.12.30-android16-5-maybe-dirty-4k #1 5f7701c9cbf727d1eebe77c89bbbeb3371e895e5
Tainted: [P]=PROPRIETARY_MODULE, [B]=BAD_PAGE, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Workqueue: writeback wb_workfn (flush-254:49)
Call trace:
f2fs_is_cp_guaranteed+0x70/0x98
f2fs_inplace_write_data+0x174/0x2f4
f2fs_do_write_data_page+0x214/0x81c
f2fs_write_single_data_page+0x28c/0x764
f2fs_write_data_pages+0x78c/0xce4
do_writepages+0xe8/0x2fc
__writeback_single_inode+0x4c/0x4b4
writeback_sb_inodes+0x314/0x540
__writeback_inodes_wb+0xa4/0xf4
wb_writeback+0x160/0x448
wb_workfn+0x2f0/0x5dc
process_scheduled_works+0x1c8/0x458
worker_thread+0x334/0x3f0
kthread+0x118/0x1ac
ret_from_fork+0x10/0x20
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220575
The panic was caused by UAF issue w/ below race condition:
kworker
- writepages
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_inplace_write_data
- f2fs_merge_page_bio
- add_inu_page
: cache page #1 into bio & cache bio in
io->bio_list
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_inplace_write_data
- f2fs_merge_page_bio
- add_inu_page
: cache page #2 into bio which is linked
in io->bio_list
write
- f2fs_write_begin
: write page #1
- f2fs_folio_wait_writeback
- f2fs_submit_merged_ipu_write
- f2fs_submit_write_bio
: submit bio which inclues page #1 and #2
software IRQ
- f2fs_write_end_io
- fscrypt_free_bounce_page
: freed bounced page which belongs to page #2
- inc_page_count( , WB_DATA_TYPE(data_folio), false)
: data_folio points to fio->encrypted_page
the bounced page can be freed before
accessing it in f2fs_is_cp_guarantee()
It can reproduce w/ below testcase:
Run below script in shell #1:
for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \
-c "pwrite 0 32k" -c "fdatasync"
Run below script in shell #2:
for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \
-c "pwrite 0 32k" -c "fdatasync"
So, in f2fs_merge_page_bio(), let's avoid using fio->encrypted_page after
commit page into internal ipu cache. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Set end correctly when doing batch carry
Even though the test suite covers this it somehow became obscured that
this wasn't working.
The test iommufd_ioas.mock_domain.access_domain_destory would blow up
rarely.
end should be set to 1 because this just pushed an item, the carry, to the
pfns list.
Sometimes the test would blow up with:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 5 PID: 584 Comm: iommufd Not tainted 6.5.0-rc1-dirty #1236
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:batch_unpin+0xa2/0x100 [iommufd]
Code: 17 48 81 fe ff ff 07 00 77 70 48 8b 15 b7 be 97 e2 48 85 d2 74 14 48 8b 14 fa 48 85 d2 74 0b 40 0f b6 f6 48 c1 e6 04 48 01 f2 <48> 8b 3a 48 c1 e0 06 89 ca 48 89 de 48 83 e7 f0 48 01 c7 e8 96 dc
RSP: 0018:ffffc90001677a58 EFLAGS: 00010246
RAX: 00007f7e2646f000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 00000000fefc4c8d RDI: 0000000000fefc4c
RBP: ffffc90001677a80 R08: 0000000000000048 R09: 0000000000000200
R10: 0000000000030b98 R11: ffffffff81f3bb40 R12: 0000000000000001
R13: ffff888101f75800 R14: ffffc90001677ad0 R15: 00000000000001fe
FS: 00007f9323679740(0000) GS:ffff8881ba540000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000105ede003 CR4: 00000000003706a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0x5c/0x70
? __die+0x1f/0x60
? page_fault_oops+0x15d/0x440
? lock_release+0xbc/0x240
? exc_page_fault+0x4a4/0x970
? asm_exc_page_fault+0x27/0x30
? batch_unpin+0xa2/0x100 [iommufd]
? batch_unpin+0xba/0x100 [iommufd]
__iopt_area_unfill_domain+0x198/0x430 [iommufd]
? __mutex_lock+0x8c/0xb80
? __mutex_lock+0x6aa/0xb80
? xa_erase+0x28/0x30
? iopt_table_remove_domain+0x162/0x320 [iommufd]
? lock_release+0xbc/0x240
iopt_area_unfill_domain+0xd/0x10 [iommufd]
iopt_table_remove_domain+0x195/0x320 [iommufd]
iommufd_hw_pagetable_destroy+0xb3/0x110 [iommufd]
iommufd_object_destroy_user+0x8e/0xf0 [iommufd]
iommufd_device_detach+0xc5/0x140 [iommufd]
iommufd_selftest_destroy+0x1f/0x70 [iommufd]
iommufd_object_destroy_user+0x8e/0xf0 [iommufd]
iommufd_destroy+0x3a/0x50 [iommufd]
iommufd_fops_ioctl+0xfb/0x170 [iommufd]
__x64_sys_ioctl+0x40d/0x9a0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix double free in user_cluster_connect()
user_cluster_disconnect() frees "conn->cc_private" which is "lc" but then
the error handling frees "lc" a second time. Set "lc" to NULL on this
path to avoid a double free. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: Fix integer overflow in run_unpack()
The MFT record relative to the file being opened contains its runlist,
an array containing information about the file's location on the physical
disk. Analysis of all Call Stack paths showed that the values of the
runlist array, from which LCNs are calculated, are not validated before
run_unpack function.
The run_unpack function decodes the compressed runlist data format
from MFT attributes (for example, $DATA), converting them into a runs_tree
structure, which describes the mapping of virtual clusters (VCN) to
logical clusters (LCN). The NTFS3 subsystem also has a shortcut for
deleting files from MFT records - in this case, the RUN_DEALLOCATE
command is sent to the run_unpack input, and the function logic
provides that all data transferred to the runlist about file or
directory is deleted without creating a runs_tree structure.
Substituting the runlist in the $DATA attribute of the MFT record for an
arbitrary file can lead either to access to arbitrary data on the disk
bypassing access checks to them (since the inode access check
occurs above) or to destruction of arbitrary data on the disk.
Add overflow check for addition operation.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Check phy before init msta_link in mt7996_mac_sta_add_links()
In order to avoid a possible NULL pointer dereference in
mt7996_mac_sta_init_link routine, move the phy pointer check before
running mt7996_mac_sta_init_link() in mt7996_mac_sta_add_links routine. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: vringh: Fix copy_to_iter return value check
The return value of copy_to_iter can't be negative, check whether the
copied length is equal to the requested length instead of checking for
negative values. |
| In the Linux kernel, the following vulnerability has been resolved:
zsmalloc: move LRU update from zs_map_object() to zs_malloc()
Under memory pressure, we sometimes observe the following crash:
[ 5694.832838] ------------[ cut here ]------------
[ 5694.842093] list_del corruption, ffff888014b6a448->next is LIST_POISON1 (dead000000000100)
[ 5694.858677] WARNING: CPU: 33 PID: 418824 at lib/list_debug.c:47 __list_del_entry_valid+0x42/0x80
[ 5694.961820] CPU: 33 PID: 418824 Comm: fuse_counters.s Kdump: loaded Tainted: G S 5.19.0-0_fbk3_rc3_hoangnhatpzsdynshrv41_10870_g85a9558a25de #1
[ 5694.990194] Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM16 05/24/2021
[ 5695.007072] RIP: 0010:__list_del_entry_valid+0x42/0x80
[ 5695.017351] Code: 08 48 83 c2 22 48 39 d0 74 24 48 8b 10 48 39 f2 75 2c 48 8b 51 08 b0 01 48 39 f2 75 34 c3 48 c7 c7 55 d7 78 82 e8 4e 45 3b 00 <0f> 0b eb 31 48 c7 c7 27 a8 70 82 e8 3e 45 3b 00 0f 0b eb 21 48 c7
[ 5695.054919] RSP: 0018:ffffc90027aef4f0 EFLAGS: 00010246
[ 5695.065366] RAX: 41fe484987275300 RBX: ffff888008988180 RCX: 0000000000000000
[ 5695.079636] RDX: ffff88886006c280 RSI: ffff888860060480 RDI: ffff888860060480
[ 5695.093904] RBP: 0000000000000002 R08: 0000000000000000 R09: ffffc90027aef370
[ 5695.108175] R10: 0000000000000000 R11: ffffffff82fdf1c0 R12: 0000000010000002
[ 5695.122447] R13: ffff888014b6a448 R14: ffff888014b6a420 R15: 00000000138dc240
[ 5695.136717] FS: 00007f23a7d3f740(0000) GS:ffff888860040000(0000) knlGS:0000000000000000
[ 5695.152899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5695.164388] CR2: 0000560ceaab6ac0 CR3: 000000001c06c001 CR4: 00000000007706e0
[ 5695.178659] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5695.192927] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5695.207197] PKRU: 55555554
[ 5695.212602] Call Trace:
[ 5695.217486] <TASK>
[ 5695.221674] zs_map_object+0x91/0x270
[ 5695.229000] zswap_frontswap_store+0x33d/0x870
[ 5695.237885] ? do_raw_spin_lock+0x5d/0xa0
[ 5695.245899] __frontswap_store+0x51/0xb0
[ 5695.253742] swap_writepage+0x3c/0x60
[ 5695.261063] shrink_page_list+0x738/0x1230
[ 5695.269255] shrink_lruvec+0x5ec/0xcd0
[ 5695.276749] ? shrink_slab+0x187/0x5f0
[ 5695.284240] ? mem_cgroup_iter+0x6e/0x120
[ 5695.292255] shrink_node+0x293/0x7b0
[ 5695.299402] do_try_to_free_pages+0xea/0x550
[ 5695.307940] try_to_free_pages+0x19a/0x490
[ 5695.316126] __folio_alloc+0x19ff/0x3e40
[ 5695.323971] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.332681] ? walk_component+0x2a8/0xb50
[ 5695.340697] ? generic_permission+0xda/0x2a0
[ 5695.349231] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.357940] ? walk_component+0x2a8/0xb50
[ 5695.365955] vma_alloc_folio+0x10e/0x570
[ 5695.373796] ? walk_component+0x52/0xb50
[ 5695.381634] wp_page_copy+0x38c/0xc10
[ 5695.388953] ? filename_lookup+0x378/0xbc0
[ 5695.397140] handle_mm_fault+0x87f/0x1800
[ 5695.405157] do_user_addr_fault+0x1bd/0x570
[ 5695.413520] exc_page_fault+0x5d/0x110
[ 5695.421017] asm_exc_page_fault+0x22/0x30
After some investigation, I have found the following issue: unlike other
zswap backends, zsmalloc performs the LRU list update at the object
mapping time, rather than when the slot for the object is allocated.
This deviation was discussed and agreed upon during the review process
of the zsmalloc writeback patch series:
https://lore.kernel.org/lkml/Y3flcAXNxxrvy3ZH@cmpxchg.org/
Unfortunately, this introduces a subtle bug that occurs when there is a
concurrent store and reclaim, which interleave as follows:
zswap_frontswap_store() shrink_worker()
zs_malloc() zs_zpool_shrink()
spin_lock(&pool->lock) zs_reclaim_page()
zspage = find_get_zspage()
spin_unlock(&pool->lock)
spin_lock(&pool->lock)
zspage = list_first_entry(&pool->lru)
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix race when deleting free space root from the dirty cow roots list
When deleting the free space tree we are deleting the free space root
from the list fs_info->dirty_cowonly_roots without taking the lock that
protects it, which is struct btrfs_fs_info::trans_lock.
This unsynchronized list manipulation may cause chaos if there's another
concurrent manipulation of this list, such as when adding a root to it
with ctree.c:add_root_to_dirty_list().
This can result in all sorts of weird failures caused by a race, such as
the following crash:
[337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI
[337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs]
[337571.279928] Code: 85 38 06 00 (...)
[337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206
[337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000
[337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070
[337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b
[337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600
[337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48
[337571.281723] FS: 00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000
[337571.281950] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0
[337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[337571.282874] Call Trace:
[337571.283101] <TASK>
[337571.283327] ? __die_body+0x1b/0x60
[337571.283570] ? die_addr+0x39/0x60
[337571.283796] ? exc_general_protection+0x22e/0x430
[337571.284022] ? asm_exc_general_protection+0x22/0x30
[337571.284251] ? commit_cowonly_roots+0x11f/0x250 [btrfs]
[337571.284531] btrfs_commit_transaction+0x42e/0xf90 [btrfs]
[337571.284803] ? _raw_spin_unlock+0x15/0x30
[337571.285031] ? release_extent_buffer+0x103/0x130 [btrfs]
[337571.285305] reset_balance_state+0x152/0x1b0 [btrfs]
[337571.285578] btrfs_balance+0xa50/0x11e0 [btrfs]
[337571.285864] ? __kmem_cache_alloc_node+0x14a/0x410
[337571.286086] btrfs_ioctl+0x249a/0x3320 [btrfs]
[337571.286358] ? mod_objcg_state+0xd2/0x360
[337571.286577] ? refill_obj_stock+0xb0/0x160
[337571.286798] ? seq_release+0x25/0x30
[337571.287016] ? __rseq_handle_notify_resume+0x3ba/0x4b0
[337571.287235] ? percpu_counter_add_batch+0x2e/0xa0
[337571.287455] ? __x64_sys_ioctl+0x88/0xc0
[337571.287675] __x64_sys_ioctl+0x88/0xc0
[337571.287901] do_syscall_64+0x38/0x90
[337571.288126] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[337571.288352] RIP: 0033:0x7f478aaffe9b
So fix this by locking struct btrfs_fs_info::trans_lock before deleting
the free space root from that list. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
Commit c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic")
introduced an array mrioc->evtack_cmds but initialization of the array
elements was missed. They are just zero cleared. The function
mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the
zero value of the host_tag field, the function calls clear_bit() for
mrico->evtack_cmds_bitmap with wrong bit index. This results in memory
access to invalid address and "BUG: KASAN: use-after-free". This BUG was
observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add
the missing initialization of mrioc->evtack_cmds. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix memory leak in wx_setup_rx_resources
When wx_alloc_page_pool() failed in wx_setup_rx_resources(), it doesn't
release DMA buffer. Add dma_free_coherent() in the error path to release
the DMA buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
amba: bus: fix refcount leak
commit 5de1540b7bc4 ("drivers/amba: create devices from device tree")
increases the refcount of of_node, but not releases it in
amba_device_release, so there is refcount leak. By using of_node_put
to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range
Because of what seems to be a typo, a 6Ghz-only phy for which the BDF
does not allow the 7115Mhz channel will fail to register:
WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954
Modules linked in: ath11k_pci sbsa_gwdt
CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9
Hardware name: Freebox V7R Board (DT)
Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : wiphy_register+0x914/0x954
lr : ieee80211_register_hw+0x67c/0xc10
sp : ffffff800b123aa0
x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418
x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168
x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014
x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f
x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd
x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718
x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006
x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284
x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
wiphy_register+0x914/0x954
ieee80211_register_hw+0x67c/0xc10
ath11k_mac_register+0x7c4/0xe10
ath11k_core_qmi_firmware_ready+0x1f4/0x570
ath11k_qmi_driver_event_work+0x198/0x590
process_one_work+0x1b8/0x328
worker_thread+0x6c/0x414
kthread+0x100/0x104
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22
ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22
ath11k_pci 0002:01:00.0: failed to create pdev core: -22 |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix tags leak when shrink nr_hw_queues
Although we don't need to realloc set->tags[] when shrink nr_hw_queues,
we need to free them. Or these tags will be leaked.
How to reproduce:
1. mount -t configfs configfs /mnt
2. modprobe null_blk nr_devices=0 submit_queues=8
3. mkdir /mnt/nullb/nullb0
4. echo 1 > /mnt/nullb/nullb0/power
5. echo 4 > /mnt/nullb/nullb0/submit_queues
6. rmdir /mnt/nullb/nullb0
In step 4, will alloc 9 tags (8 submit queues and 1 poll queue), then
in step 5, new_nr_hw_queues = 5 (4 submit queues and 1 poll queue).
At last in step 6, only these 5 tags are freed, the other 4 tags leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: only reset hashed tables when supported
Last year, the code that manages GSI channel transactions switched
from using spinlock-protected linked lists to using indexes into the
ring buffer used for a channel. Recently, Google reported seeing
transaction reference count underflows occasionally during shutdown.
Doug Anderson found a way to reproduce the issue reliably, and
bisected the issue to the commit that eliminated the linked lists
and the lock. The root cause was ultimately determined to be
related to unused transactions being committed as part of the modem
shutdown cleanup activity. Unused transactions are not normally
expected (except in error cases).
The modem uses some ranges of IPA-resident memory, and whenever it
shuts down we zero those ranges. In ipa_filter_reset_table() a
transaction is allocated to zero modem filter table entries. If
hashing is not supported, hashed table memory should not be zeroed.
But currently nothing prevents that, and the result is an unused
transaction. Something similar occurs when we zero routing table
entries for the modem.
By preventing any attempt to clear hashed tables when hashing is not
supported, the reference count underflow is avoided in this case.
Note that there likely remains an issue with properly freeing unused
transactions (if they occur due to errors). This patch addresses
only the underflows that Google originally reported. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix oops for port->pm on uart_change_pm()
Unloading a hardware specific 8250 driver can produce error "Unable to
handle kernel paging request at virtual address" about ten seconds after
unloading the driver. This happens on uart_hangup() calling
uart_change_pm().
Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port
specific driver unbind") was only a partial fix. If the hardware specific
driver has initialized port->pm function, we need to clear port->pm too.
Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
will call port->pm() instead of serial8250_do_pm(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: TC, Fix using eswitch mapping in nic mode
Cited patch is using the eswitch object mapping pool while
in nic mode where it isn't initialized. This results in the
trace below [0].
Fix that by using either nic or eswitch object mapping pool
depending if eswitch is enabled or not.
[0]:
[ 826.446057] ==================================================================
[ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233
[ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1
[ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 826.449785] Call Trace:
[ 826.450052] <TASK>
[ 826.450302] dump_stack_lvl+0x33/0x50
[ 826.450650] print_report+0xc2/0x610
[ 826.450998] ? __virt_addr_valid+0xb1/0x130
[ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.451935] kasan_report+0xae/0xe0
[ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.453368] ? __kmalloc_node+0x5a/0x120
[ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core]
[ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core]
[ 826.455011] ? mutex_unlock+0x80/0xd0
[ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210
[ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core]
[ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core]
[ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core]
[ 826.457636] ? __kasan_kmalloc+0x77/0x90
[ 826.458000] ? __kmalloc+0x57/0x120
[ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core]
[ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0
[ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core]
[ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core]
[ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core]
[ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core]
[ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core]
[ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0
[ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core]
[ 826.463163] ? kasan_save_stack+0x2e/0x40
[ 826.463534] ? down_read+0x115/0x1b0
[ 826.463878] ? down_write_killable+0x110/0x110
[ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0
[ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core]
[ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core]
[ 826.465878] tc_setup_cb_add+0x112/0x250
[ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower]
[ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower]
[ 826.467212] fl_change+0x14e1/0x2030 [cls_flower]
[ 826.467636] ? sock_def_readable+0x89/0x120
[ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower]
[ 826.468509] ? kasan_unpoison+0x23/0x50
[ 826.468873] ? get_random_u16+0x180/0x180
[ 826.469244] ? __radix_tree_lookup+0x2b/0x130
[ 826.469640] ? fl_get+0x7b/0x140 [cls_flower]
[ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower]
[ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210
[ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower]
[ 826.471427] tc_new_tfilter+0x644/0x1050
[ 826.471795] ? tc_get_tfilter+0x860/0x860
[ 826.472170] ? __thaw_task+0x130/0x130
[ 826.472525] ? arch_stack_walk+0x98/0xf0
[ 826.472892] ? cap_capable+0x9f/0xd0
[ 826.473235] ? security_capable+0x47/0x60
[ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550
[ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0
[ 826.474383] ? __stack_depot_save+0x35/0x4c0
[ 826.474779] ? kasan_save_stack+0x2e/0x40
[ 826.475149] ? kasan_save_stack+0x1e/0x40
[ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0
[ 826.475939] ? task_work_add+0x77/0x1c0
[ 826.476305] netlink_rcv_skb+0xe0/0x210
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
USB: sisusbvga: Add endpoint checks
The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver:
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95
RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003
R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline]
sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379
sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline]
sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline]
sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177
sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869
...
The problem was caused by the fact that the driver does not check
whether the endpoints it uses are actually present and have the
appropriate types. This can be fixed by adding a simple check of
the endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr
When smb1 mount fails, KASAN detect slab-out-of-bounds in
init_smb2_rsp_hdr like the following one.
For smb1 negotiate(56bytes) , init_smb2_rsp_hdr() for smb2 is called.
The issue occurs while handling smb1 negotiate as smb2 server operations.
Add smb server operations for smb1 (get_cmd_val, init_rsp_hdr,
allocate_rsp_buf, check_user_session) to handle smb1 negotiate so that
smb2 server operation does not handle it.
[ 411.400423] CIFS: VFS: Use of the less secure dialect vers=1.0 is
not recommended unless required for access to very old servers
[ 411.400452] CIFS: Attempting to mount \\192.168.45.139\homes
[ 411.479312] ksmbd: init_smb2_rsp_hdr : 492
[ 411.479323] ==================================================================
[ 411.479327] BUG: KASAN: slab-out-of-bounds in
init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479369] Read of size 16 at addr ffff888488ed0734 by task kworker/14:1/199
[ 411.479379] CPU: 14 PID: 199 Comm: kworker/14:1 Tainted: G
OE 6.1.21 #3
[ 411.479386] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8
Series/Z10PA-D8 Series, BIOS 3801 08/23/2019
[ 411.479390] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 411.479425] Call Trace:
[ 411.479428] <TASK>
[ 411.479432] dump_stack_lvl+0x49/0x63
[ 411.479444] print_report+0x171/0x4a8
[ 411.479452] ? kasan_complete_mode_report_info+0x3c/0x200
[ 411.479463] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479497] kasan_report+0xb4/0x130
[ 411.479503] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479537] kasan_check_range+0x149/0x1e0
[ 411.479543] memcpy+0x24/0x70
[ 411.479550] init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479585] handle_ksmbd_work+0x109/0x760 [ksmbd]
[ 411.479616] ? _raw_spin_unlock_irqrestore+0x50/0x50
[ 411.479624] ? smb3_encrypt_resp+0x340/0x340 [ksmbd]
[ 411.479656] process_one_work+0x49c/0x790
[ 411.479667] worker_thread+0x2b1/0x6e0
[ 411.479674] ? process_one_work+0x790/0x790
[ 411.479680] kthread+0x177/0x1b0
[ 411.479686] ? kthread_complete_and_exit+0x30/0x30
[ 411.479692] ret_from_fork+0x22/0x30
[ 411.479702] </TASK> |
