| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Conditional Authentication (Adaptive Authentication) script does not correctly enforce the completion of all required authentication steps when a specific multi-step pattern involving certain authenticators is configured. This allows an attacker to bypass intermediate authentication challenges by exploiting how the script handles callbacks and re-execution of authentication steps.
Successful exploitation allows a malicious actor to gain unauthorized access to a targeted user account. This vulnerability can only be exploited when all of the following conditions are met: the application login flow contains a specific secondary authenticator, the Conditional Authentication script is configured with particular event callbacks and re-executes an authentication step, the targeted user has one of the impacted authenticators enrolled, and the attacker successfully completes any preceding authentication steps. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: use wiphy work for socket owner autodisconnect
nl80211_netlink_notify() walks the cfg80211 wireless device list when a
NETLINK_GENERIC socket is released. If the socket owns a connection, the
notifier queues the embedded wdev->disconnect_wk work item.
That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a
NETLINK_URELEASE notifier that already observed conn_owner_nlportid can
queue it after that cancel returns. _cfg80211_unregister_wdev() then
removes the wdev from the list and waits for RCU readers, but
synchronize_net() does not drain work queued by such a reader.
Make the autodisconnect work a wiphy_work instead. The callback already
needs the wiphy mutex, and wiphy_work runs under that mutex. This lets
teardown cancel pending autodisconnect work while holding the mutex,
without a cancel_work_sync() vs. worker locking concern.
Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any
NETLINK_URELEASE notifier that had already reached the wdev list has then
either queued the work and it is removed, or can no longer find the wdev. |
| When an Event Publisher output adapter is configured with irrelevant properties, the affected products log these properties. This logging occurs without sufficient validation or sanitization of the property values.
A malicious actor with access to the 'wso2carbon' log files could retrieve sensitive information, such as user credentials or other confidential data, that was inadvertently logged due to misconfiguration, potentially leading to unauthorized access. |
| A flaw was found in the koku-metrics-operator for Red Hat OpenShift. The operator's CostManagementMetricsConfig custom resource allows a user able to edit the CR to specify an arbitrary upload URL. The operator attaches its own Kubernetes service-account bearer token to queries sent to this user-controlled URL, allowing the attacker to obtain the token. |
| Heap-based buffer overflow in Windows LUAFV allows an authorized attacker to elevate privileges locally. |
| tls_opt_dtls_peer_connection_id_value_get() in subsys/net/lib/sockets/sockets_tls.c, which handles getsockopt(SOL_TLS, TLS_DTLS_PEER_CID_VALUE), passed the caller-supplied optval directly to mbedtls_ssl_get_peer_cid() without verifying the buffer was at least MBEDTLS_SSL_CID_OUT_LEN_MAX (default 32) bytes. mbedtls_ssl_get_peer_cid() copies the peer-negotiated DTLS Connection ID (length 1..MBEDTLS_SSL_CID_OUT_LEN_MAX) into that buffer without a destination-size parameter, so a caller-supplied optlen smaller than the CID causes a write of up to 31 bytes past the buffer end.
In CONFIG_USERSPACE builds the getsockopt syscall verifier (z_vrfy_zsock_getsockopt) bounce-buffers the user's optval into a kernel allocation of exactly optlen bytes (k_usermode_alloc_from_copy -> z_thread_malloc), so an unprivileged user thread that passes a small optlen on a connected DTLS socket with Connection ID enabled induces a kernel-heap buffer overflow, with the overflowing content being the remote peer's CID.
The defect requires CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID, an established DTLS session with a negotiated peer CID, and (for the kernel-crossing case) CONFIG_USERSPACE. Introduced when the TLS_DTLS_CID option was added (v3.5.0).
The fix rejects callers whose optlen is below MBEDTLS_SSL_CID_OUT_LEN_MAX with -EINVAL. |
| A Server-Side Request Forgery (SSRF) vulnerability existed in Lookyloo's PlaywrightCapture when the only_global_lookup option was enabled.
PlaywrightCapture implements this option to prevent captures from accessing local, loopback, or otherwise non-public network resources. However, favicon retrieval was performed separately from the browser request-routing protections. Favicon URLs extracted from rendered HTML were resolved and subsequently fetched directly using an aiohttp.ClientSession.
An attacker able to supply or control a web page processed by PlaywrightCapture could include a crafted favicon reference, for example pointing to a loopback address, private IP address, or another resource reachable only from the PlaywrightCapture host. When the page was processed, the favicon retrieval routine could issue an HTTP request to this destination despite only_global_lookup being enabled.
This bypass could therefore be used to make the PlaywrightCapture host interact with internal network services that should not be reachable through a capture. Depending on the targeted service and its response, this could enable internal service discovery, access to internal resources, or interaction with HTTP endpoints available only from the capture infrastructure.
The patch introduces a common URL validation routine and applies it to favicon retrieval. Direct non-global IP addresses, localhost, .local domains, malformed URLs, and other explicitly non-public destinations are rejected before the favicon request is performed.
This fix is a complementary fix to CVE-2026-44439 - GCVE-0-2026-44439 - GHSA-687H-XW6F-Q2QW |
| An unauthenticated user may access restricted artifacts in JFrog Artifactory under specific conditions. |
| A holder of a valid integration credential may impersonate other users under specific conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: tps65219: fix irq_data.rdev not being assigned
Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper
function") removed the tps65219_get_rdev_by_name() helper along with
the irq_data.rdev assignment that depended on it. This left
irq_data.rdev uninitialized for all IRQs, causing undefined behavior
when regulator_notifier_call_chain() is called from the IRQ handler:
Internal error: Oops: 0000000096000004
pc : regulator_notifier_call_chain
lr : tps65219_regulator_irq_handler
Call trace:
regulator_notifier_call_chain
tps65219_regulator_irq_handler
handle_nested_irq
regmap_irq_thread
irq_thread_fn
irq_thread
kthread
ret_from_fork
Instead of restoring a dedicated lookup array, restructure the probe
function to combine regulator registration with IRQ registration in
the same loop. This way the rdev returned by devm_regulator_register()
is naturally available for assigning to irq_data.rdev without any
auxiliary data structure.
Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any
registered regulator are registered with rdev=NULL, and the IRQ handler
is protected with a NULL check to avoid crashing. |
| Joomla Extension - joomshaper.com - Unauthenticated arbitrary directory creation and file write in SP Page Builder < 6.8.0 - An unauthenticated attacker can create arbitrary directories and files with a predefined name. |
| An authenticated user may write data outside the intended Docker cache path under specific remote-repository conditions. |
| A repository reader with cache-deploy permission may access content outside a configured upstream path under specific conditions. |
| A low-privilege authenticated user may permanently remove protected internal metadata across repositories under specific conditions. |
| An anonymous caller when anonymous access is enabled, or a low-privilege authenticated user, may learn private Release Bundle names and versions when the bundle name is known. |
| MaaAssistantArknights is a one-click tool for daily Arknights tasks. In the current dev-v2 workflow, .github/workflows/release-preparation.yml inlined attacker-controlled github.event.pull_request.title into a run: shell command during the pull_request opened, reopened, and ready_for_review events, so a non-draft fork PR whose title starts with Release v could execute shell commands on the ubuntu-latest runner during the generate-changelog job. This vulnerability is fixed by commit cafc3946059e6337d2089d4fec8b6885ba17c332. |
| Nagios Core before 4.5.14 and Nagios XI before 2026R1.7 are vulnerable to reflected cross-site scripting in cmd.cgi via the NagFormId parameter. An unauthenticated remote attacker can craft a malicious link that, when followed by an authenticated user, executes arbitrary JavaScript in the victim's browser. |
| Authorization Bypass Through User-Controlled Key in the ticket management component in Roskus Prospero Flow CRM before 5.4.9 allows authenticated users of any company to read the full content (title, description, and attachments) of tickets belonging to another company, to hijack another company's tickets by reassigning their company_id, and to delete another company's tickets without any authorization check, via the ticket's numeric identifier, because the read and save operations retrieve the record without constraining the query to the authenticated user's company, and the delete controller type-hints a generic Illuminate\Http\Request instead of the TicketDeleteRequest that would enforce the required permission. |
| Cross-site Scripting in the finding renderer in maalfer Pentestify before 2.3.1 allows authenticated users to execute arbitrary JavaScript in the application origin via HTML markup stored in a finding's severity field, which the frontend interpolates unescaped into class and style attributes when rendering the report. |
| Travel Agency Management System developed by Win Men Intermational has a SQL Injection vulnerability. Unauthenticated remote attackers can inject arbitrary SQL commands to read, modify, and delete database contents. |
