| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: av7110: prevent underflow in write_ts_to_decoder()
The buf[4] value comes from the user via ts_play(). It is a value in
the u8 range. The final length we pass to av7110_ipack_instant_repack()
is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is
not negative. It's not clear that passing a negative len value does
anything bad necessarily, but it's not best practice.
With the new bounds checking the "if (!len)" condition is no longer
possible or required so remove that. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()
The following warning was triggered on a hardware environment:
SELinux: Converting 162 SID table entries...
BUG: sleeping function called from invalid context at
__might_sleep+0x60/0x74 0x0
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar
CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x18/0x28
dump_stack+0xe8/0x15c
___might_sleep+0x168/0x17c
__might_sleep+0x60/0x74
__kmalloc_track_caller+0xa0/0x7dc
kstrdup+0x54/0xac
convert_context+0x48/0x2e4
sidtab_context_to_sid+0x1c4/0x36c
security_context_to_sid_core+0x168/0x238
security_context_to_sid_default+0x14/0x24
inode_doinit_use_xattr+0x164/0x1e4
inode_doinit_with_dentry+0x1c0/0x488
selinux_d_instantiate+0x20/0x34
security_d_instantiate+0x70/0xbc
d_splice_alias+0x4c/0x3c0
ext4_lookup+0x1d8/0x200 [ext4]
__lookup_slow+0x12c/0x1e4
walk_component+0x100/0x200
path_lookupat+0x88/0x118
filename_lookup+0x98/0x130
user_path_at_empty+0x48/0x60
vfs_statx+0x84/0x140
vfs_fstatat+0x20/0x30
__se_sys_newfstatat+0x30/0x74
__arm64_sys_newfstatat+0x1c/0x2c
el0_svc_common.constprop.0+0x100/0x184
do_el0_svc+0x1c/0x2c
el0_svc+0x20/0x34
el0_sync_handler+0x80/0x17c
el0_sync+0x13c/0x140
SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is
not valid (left unmapped).
It was found that within a critical section of spin_lock_irqsave in
sidtab_context_to_sid(), convert_context() (hooked by
sidtab_convert_params.func) might cause the process to sleep via
allocating memory with GFP_KERNEL, which is problematic.
As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func
has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL.
Therefore, fix this problem by adding a gfp_t argument for
convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC
properly in individual callers.
[PM: wrap long BUG() output lines, tweak subject line] |
| The Qualys Cloud Agent included a bundled uninstall script (qagent_uninstall.sh), specific to Mac and Linux supported versions that invoked multiple system commands without using absolute paths and without sanitizing the $PATH environment. If the uninstall script is executed with elevated privileges (e.g., via sudo) in an environment where $PATH has been manipulated, an attacker with root/sudo privileges could cause malicious executables to be run in place of the intended system binaries. This behavior can be leveraged for local privilege escalation and arbitrary command execution under elevated privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path which
will call mmc_free_host(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Add sanity checks for group and filesystem size
Add sanity check that filesystem size does not exceed the underlying
device size and that group size is big enough so that metadata can fit
into it. This avoid trying to mount some crafted filesystems with
extremely large group counts. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix refcount leak in hns_roce_mmap
rdma_user_mmap_entry_get_pgoff() takes the reference.
Add missing rdma_user_mmap_entry_put() to release the reference.
Acked-by Haoyue Xu <xuhaoyue1@hisilicon.com> |
| In the Linux kernel, the following vulnerability has been resolved:
media: camss: Clean up received buffers on failed start of streaming
It is required to return the received buffers, if streaming can not be
started. For instance media_pipeline_start() may fail with EPIPE, if
a link validation between entities is not passed, and in such a case
a user gets a kernel warning:
WARNING: CPU: 1 PID: 520 at drivers/media/common/videobuf2/videobuf2-core.c:1592 vb2_start_streaming+0xec/0x160
<snip>
Call trace:
vb2_start_streaming+0xec/0x160
vb2_core_streamon+0x9c/0x1a0
vb2_ioctl_streamon+0x68/0xbc
v4l_streamon+0x30/0x3c
__video_do_ioctl+0x184/0x3e0
video_usercopy+0x37c/0x7b0
video_ioctl2+0x24/0x40
v4l2_ioctl+0x4c/0x70
The fix is to correct the error path in video_start_streaming() of camss. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: skip splitting and logical rewriting on pre-alloc write
When doing a relocation, there is a chance that at the time of
btrfs_reloc_clone_csums(), there is no checksum for the corresponding
region.
In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item
and so ordered_extent's logical is set to some invalid value. Then,
btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a
block group and will hit an assert or a null pointer dereference as
following.
This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16
times) with a null_blk setup. The device's zone size and capacity is set to
32 MB and the storage size is set to 5 GB on my setup.
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1
Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00
> 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00
RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088
RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827
R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000
R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0
Call Trace:
<TASK>
? die_addr+0x3c/0xa0
? exc_general_protection+0x148/0x220
? asm_exc_general_protection+0x22/0x30
? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs]
btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs]
? rcu_is_watching+0x11/0xb0
? lock_release+0x47a/0x620
? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs]
? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs]
? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs]
? __smp_call_single_queue+0x124/0x350
? rcu_is_watching+0x11/0xb0
btrfs_work_helper+0x19f/0xc60 [btrfs]
? __pfx_try_to_wake_up+0x10/0x10
? _raw_spin_unlock_irq+0x24/0x50
? rcu_is_watching+0x11/0xb0
process_one_work+0x8c1/0x1430
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0x52/0x60
worker_thread+0x100/0x12c0
? __kthread_parkme+0xc1/0x1f0
? __pfx_worker_thread+0x10/0x10
kthread+0x2ea/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
On the zoned mode, writing to pre-allocated region means data relocation
write. Such write always uses WRITE command so there is no need of splitting
and rewriting logical address. Thus, we can just skip the function for the
case. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: fix potential NULL-ptr deref after clone
If cloning the SKB fails, don't try to use it, but rather return
as if we should pass it.
Coverity CID: 1503456 |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix DMA mappings leak
During reallocation of RX buffers, new DMA mappings are created for
those buffers.
steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done
This resulted in crash:
i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536
Driver BUG
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50
Call Trace:
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
Missing register, driver bug
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140
Call Trace:
xdp_rxq_info_unreg+0x1e/0x50
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
This was caused because of new buffers with different RX ring count should
substitute older ones, but those buffers were freed in
i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi,
thus kfree on rx_bi caused leak of already mapped DMA.
Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally
reallocate back to rx_bi when BPF program unloads.
If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XSP_SETUP_XSK_POOL handler. |
| In the Linux kernel, the following vulnerability has been resolved:
fsi: occ: Prevent use after free
Use get_device and put_device in the open and close functions to
make sure the device doesn't get freed while a file descriptor is
open.
Also, lock around the freeing of the device buffer and check the
buffer before using it in the submit function. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix out of bounds memory read error in symlink repair
xfs/286 produced this report on my test fleet:
==================================================================
BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110
Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184):
memcpy_orig+0x54/0x110
xrep_symlink_salvage_inline+0xb3/0xf0 [xfs]
xrep_symlink_salvage+0x100/0x110 [xfs]
xrep_symlink+0x2e/0x80 [xfs]
xrep_attempt+0x61/0x1f0 [xfs]
xfs_scrub_metadata+0x34f/0x5c0 [xfs]
xfs_ioc_scrubv_metadata+0x387/0x560 [xfs]
xfs_file_ioctl+0xe23/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128
allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago):
xfs_init_local_fork+0x79/0xe0 [xfs]
xfs_iformat_local+0xa4/0x170 [xfs]
xfs_iformat_data_fork+0x148/0x180 [xfs]
xfs_inode_from_disk+0x2cd/0x480 [xfs]
xfs_iget+0x450/0xd60 [xfs]
xfs_bulkstat_one_int+0x6b/0x510 [xfs]
xfs_bulkstat_iwalk+0x1e/0x30 [xfs]
xfs_iwalk_ag_recs+0xdf/0x150 [xfs]
xfs_iwalk_run_callbacks+0xb9/0x190 [xfs]
xfs_iwalk_ag+0x1dc/0x2f0 [xfs]
xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs]
xfs_iwalk+0xa4/0xd0 [xfs]
xfs_bulkstat+0xfa/0x170 [xfs]
xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs]
xfs_file_ioctl+0xbf2/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================
On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:
(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.
Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.
In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored
Prior to commit 69e3b846d8a7 ("arm64: mte: Sync tags for pages where PTE
is untagged"), mte_sync_tags() was only called for pte_tagged() entries
(those mapped with PROT_MTE). Therefore mte_sync_tags() could safely use
test_and_set_bit(PG_mte_tagged, &page->flags) without inadvertently
setting PG_mte_tagged on an untagged page.
The above commit was required as guests may enable MTE without any
control at the stage 2 mapping, nor a PROT_MTE mapping in the VMM.
However, the side-effect was that any page with a PTE that looked like
swap (or migration) was getting PG_mte_tagged set automatically. A
subsequent page copy (e.g. migration) copied the tags to the destination
page even if the tags were owned by KASAN.
This issue was masked by the page_kasan_tag_reset() call introduced in
commit e5b8d9218951 ("arm64: mte: reset the page tag in page->flags").
When this commit was reverted (20794545c146), KASAN started reporting
access faults because the overriding tags in a page did not match the
original page->flags (with CONFIG_KASAN_HW_TAGS=y):
BUG: KASAN: invalid-access in copy_page+0x10/0xd0 arch/arm64/lib/copy_page.S:26
Read at addr f5ff000017f2e000 by task syz-executor.1/2218
Pointer tag: [f5], memory tag: [f2]
Move the PG_mte_tagged bit setting from mte_sync_tags() to the actual
place where tags are cleared (mte_sync_page_tags()) or restored
(mte_restore_tags()). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix running_req for internal abort commands
Disabling the remote phy for a SATA disk causes a hang:
root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols
sata
root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable
root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed
[ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache
[ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK
[ 67.935094] sd 0:0:2:0: [sdc] Stopping disk
[ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK
...
[ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds.
[ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218
[ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008
[ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker
[ 124.034319] Call trace:
[ 124.036758] __switch_to+0x128/0x278
[ 124.040333] __schedule+0x434/0xa58
[ 124.043820] schedule+0x94/0x138
[ 124.047045] schedule_timeout+0x2fc/0x368
[ 124.051052] wait_for_completion+0xdc/0x200
[ 124.055234] __flush_workqueue+0x1a8/0x708
[ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0
[ 124.063858] sas_port_event_worker+0x60/0x98
[ 124.068126] process_one_work+0x3f8/0x660
[ 124.072134] worker_thread+0x70/0x700
[ 124.075793] kthread+0x1a4/0x1b8
[ 124.079014] ret_from_fork+0x10/0x20
The issue is that the per-device running_req read in
pm8001_dev_gone_notify() never goes to zero and we never make progress.
This is caused by missing accounting for running_req for when an internal
abort command completes.
In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support")
we started to send internal abort commands as a proper sas_task. In this
when we deliver a sas_task to HW the per-device running_req is incremented
in pm8001_queue_command(). However it is never decremented for internal
abort commnds, so decrement in pm8001_mpi_task_abort_resp(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: virtual_ncidev: Fix memory leak in virtual_nci_send()
skb should be free in virtual_nci_send(), otherwise kmemleak will report
memleak.
Steps for reproduction (simulated in qemu):
cd tools/testing/selftests/nci
make
./nci_dev
BUG: memory leak
unreferenced object 0xffff888107588000 (size 208):
comm "nci_dev", pid 206, jiffies 4294945376 (age 368.248s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000008d94c8fd>] __alloc_skb+0x1da/0x290
[<00000000278bc7f8>] nci_send_cmd+0xa3/0x350
[<0000000081256a22>] nci_reset_req+0x6b/0xa0
[<000000009e721112>] __nci_request+0x90/0x250
[<000000005d556e59>] nci_dev_up+0x217/0x5b0
[<00000000e618ce62>] nfc_dev_up+0x114/0x220
[<00000000981e226b>] nfc_genl_dev_up+0x94/0xe0
[<000000009bb03517>] genl_family_rcv_msg_doit.isra.14+0x228/0x2d0
[<00000000b7f8c101>] genl_rcv_msg+0x35c/0x640
[<00000000c94075ff>] netlink_rcv_skb+0x11e/0x350
[<00000000440cfb1e>] genl_rcv+0x24/0x40
[<0000000062593b40>] netlink_unicast+0x43f/0x640
[<000000001d0b13cc>] netlink_sendmsg+0x73a/0xbf0
[<000000003272487f>] __sys_sendto+0x324/0x370
[<00000000ef9f1747>] __x64_sys_sendto+0xdd/0x1b0
[<000000001e437841>] do_syscall_64+0x3f/0x90 |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: zero unused hash fields
When GSO tunnel is negotiated virtio_net_hdr_tnl_from_skb() tries to
initialize the tunnel metadata but forget to zero unused rxhash
fields. This may leak information to another side. Fixing this by
zeroing the unused hash fields. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix OOB read in indx_insert_into_buffer
Syzbot reported a OOB read bug:
BUG: KASAN: slab-out-of-bounds in indx_insert_into_buffer+0xaa3/0x13b0
fs/ntfs3/index.c:1755
Read of size 17168 at addr ffff8880255e06c0 by task syz-executor308/3630
Call Trace:
<TASK>
memmove+0x25/0x60 mm/kasan/shadow.c:54
indx_insert_into_buffer+0xaa3/0x13b0 fs/ntfs3/index.c:1755
indx_insert_entry+0x446/0x6b0 fs/ntfs3/index.c:1863
ntfs_create_inode+0x1d3f/0x35c0 fs/ntfs3/inode.c:1548
ntfs_create+0x3e/0x60 fs/ntfs3/namei.c:100
lookup_open fs/namei.c:3413 [inline]
If the member struct INDEX_BUFFER *index of struct indx_node is
incorrect, that is, the value of __le32 used is greater than the value
of __le32 total in struct INDEX_HDR. Therefore, OOB read occurs when
memmove is called in indx_insert_into_buffer().
Fix this by adding a check in hdr_find_e(). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: apple-admac: Fix 'current_tx' not getting freed
In terminate_all we should queue up all submitted descriptors to be
freed. We do that for the content of the 'issued' and 'submitted' lists,
but the 'current_tx' descriptor falls through the cracks as it's
removed from the 'issued' list once it gets assigned to be the current
descriptor. Explicitly queue up freeing of the 'current_tx' descriptor
to address a memory leak that is otherwise present. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: KVM: Fix NULL pointer dereference
After commit 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support") we
get a NULL pointer dereference when creating a KVM guest:
[ 146.243409] Starting KVM with MIPS VZ extensions
[ 149.849151] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000300, epc == ffffffffc06356ec, ra == ffffffffc063568c
[ 149.849177] Oops[#1]:
[ 149.849182] CPU: 3 PID: 2265 Comm: qemu-system-mip Not tainted 6.4.0-rc3+ #1671
[ 149.849188] Hardware name: THTF CX TL630 Series/THTF-LS3A4000-7A1000-ML4A, BIOS KL4.1F.TF.D.166.201225.R 12/25/2020
[ 149.849192] $ 0 : 0000000000000000 000000007400cce0 0000000000400004 ffffffff8119c740
[ 149.849209] $ 4 : 000000007400cce1 000000007400cce1 0000000000000000 0000000000000000
[ 149.849221] $ 8 : 000000240058bb36 ffffffff81421ac0 0000000000000000 0000000000400dc0
[ 149.849233] $12 : 9800000102a07cc8 ffffffff80e40e38 0000000000000001 0000000000400dc0
[ 149.849245] $16 : 0000000000000000 9800000106cd0000 9800000106cd0000 9800000100cce000
[ 149.849257] $20 : ffffffffc0632b28 ffffffffc05b31b0 9800000100ccca00 0000000000400000
[ 149.849269] $24 : 9800000106cd09ce ffffffff802f69d0
[ 149.849281] $28 : 9800000102a04000 9800000102a07cd0 98000001106a8000 ffffffffc063568c
[ 149.849293] Hi : 00000335b2111e66
[ 149.849295] Lo : 6668d90061ae0ae9
[ 149.849298] epc : ffffffffc06356ec kvm_vz_vcpu_setup+0xc4/0x328 [kvm]
[ 149.849324] ra : ffffffffc063568c kvm_vz_vcpu_setup+0x64/0x328 [kvm]
[ 149.849336] Status: 7400cce3 KX SX UX KERNEL EXL IE
[ 149.849351] Cause : 1000000c (ExcCode 03)
[ 149.849354] BadVA : 0000000000000300
[ 149.849357] PrId : 0014c004 (ICT Loongson-3)
[ 149.849360] Modules linked in: kvm nfnetlink_queue nfnetlink_log nfnetlink fuse sha256_generic libsha256 cfg80211 rfkill binfmt_misc vfat fat snd_hda_codec_hdmi input_leds led_class snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_pcm snd_timer snd serio_raw xhci_pci radeon drm_suballoc_helper drm_display_helper xhci_hcd ip_tables x_tables
[ 149.849432] Process qemu-system-mip (pid: 2265, threadinfo=00000000ae2982d2, task=0000000038e09ad4, tls=000000ffeba16030)
[ 149.849439] Stack : 9800000000000003 9800000100ccca00 9800000100ccc000 ffffffffc062cef4
[ 149.849453] 9800000102a07d18 c89b63a7ab338e00 0000000000000000 ffffffff811a0000
[ 149.849465] 0000000000000000 9800000106cd0000 ffffffff80e59938 98000001106a8920
[ 149.849476] ffffffff80e57f30 ffffffffc062854c ffffffff811a0000 9800000102bf4240
[ 149.849488] ffffffffc05b0000 ffffffff80e3a798 000000ff78000000 000000ff78000010
[ 149.849500] 0000000000000255 98000001021f7de0 98000001023f0078 ffffffff81434000
[ 149.849511] 0000000000000000 0000000000000000 9800000102ae0000 980000025e92ae28
[ 149.849523] 0000000000000000 c89b63a7ab338e00 0000000000000001 ffffffff8119dce0
[ 149.849535] 000000ff78000010 ffffffff804f3d3c 9800000102a07eb0 0000000000000255
[ 149.849546] 0000000000000000 ffffffff8049460c 000000ff78000010 0000000000000255
[ 149.849558] ...
[ 149.849565] Call Trace:
[ 149.849567] [<ffffffffc06356ec>] kvm_vz_vcpu_setup+0xc4/0x328 [kvm]
[ 149.849586] [<ffffffffc062cef4>] kvm_arch_vcpu_create+0x184/0x228 [kvm]
[ 149.849605] [<ffffffffc062854c>] kvm_vm_ioctl+0x64c/0xf28 [kvm]
[ 149.849623] [<ffffffff805209c0>] sys_ioctl+0xc8/0x118
[ 149.849631] [<ffffffff80219eb0>] syscall_common+0x34/0x58
The root cause is the deletion of kvm_mips_commpage_init() leaves vcpu
->arch.cop0 NULL. So fix it by making cop0 from a pointer to an embedded
object. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix double req put in p9_fd_cancelled
Syzkaller reports a KASAN issue as below:
general protection fault, probably for non-canonical address 0xfbd59c0000000021: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead000000000108-0xdead00000000010f]
CPU: 0 PID: 5083 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00037-g855bd1d7d838 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__list_del include/linux/list.h:114 [inline]
RIP: 0010:__list_del_entry include/linux/list.h:137 [inline]
RIP: 0010:list_del include/linux/list.h:148 [inline]
RIP: 0010:p9_fd_cancelled+0xe9/0x200 net/9p/trans_fd.c:734
Call Trace:
<TASK>
p9_client_flush+0x351/0x440 net/9p/client.c:614
p9_client_rpc+0xb6b/0xc70 net/9p/client.c:734
p9_client_version net/9p/client.c:920 [inline]
p9_client_create+0xb51/0x1240 net/9p/client.c:1027
v9fs_session_init+0x1f0/0x18f0 fs/9p/v9fs.c:408
v9fs_mount+0xba/0xcb0 fs/9p/vfs_super.c:126
legacy_get_tree+0x108/0x220 fs/fs_context.c:632
vfs_get_tree+0x8e/0x300 fs/super.c:1573
do_new_mount fs/namespace.c:3056 [inline]
path_mount+0x6a6/0x1e90 fs/namespace.c:3386
do_mount fs/namespace.c:3399 [inline]
__do_sys_mount fs/namespace.c:3607 [inline]
__se_sys_mount fs/namespace.c:3584 [inline]
__x64_sys_mount+0x283/0x300 fs/namespace.c:3584
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
This happens because of a race condition between:
- The 9p client sending an invalid flush request and later cleaning it up;
- The 9p client in p9_read_work() canceled all pending requests.
Thread 1 Thread 2
...
p9_client_create()
...
p9_fd_create()
...
p9_conn_create()
...
// start Thread 2
INIT_WORK(&m->rq, p9_read_work);
p9_read_work()
...
p9_client_rpc()
...
...
p9_conn_cancel()
...
spin_lock(&m->req_lock);
...
p9_fd_cancelled()
...
...
spin_unlock(&m->req_lock);
// status rewrite
p9_client_cb(m->client, req, REQ_STATUS_ERROR)
// first remove
list_del(&req->req_list);
...
spin_lock(&m->req_lock)
...
// second remove
list_del(&req->req_list);
spin_unlock(&m->req_lock)
...
Commit 74d6a5d56629 ("9p/trans_fd: Fix concurrency del of req_list in
p9_fd_cancelled/p9_read_work") fixes a concurrency issue in the 9p filesystem
client where the req_list could be deleted simultaneously by both
p9_read_work and p9_fd_cancelled functions, but for the case where req->status
equals REQ_STATUS_RCVD.
Update the check for req->status in p9_fd_cancelled to skip processing not
just received requests, but anything that is not SENT, as whatever
changed the state from SENT also removed the request from its list.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
[updated the check from status == RECV || status == ERROR to status != SENT] |
