| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_sfb: Replace direct dequeue call with peek and qdisc_dequeue_peeked
When sfb has children (eg qfq qdisc) whose peek() callback is
qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such
qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from
its child (sfb in this case), it will do the following:
1a. do a peek() - and when sensing there's an skb the child can offer, then
- the child in this case(sfb) calls its child's (qfq) peek.
qfq does the right thing and will return the gso_skb queue packet.
Note: if there wasnt a gso_skb entry then qfq will store it there.
1b. invoke a dequeue() on the child (sfb). And herein lies the problem.
- sfb will call the child's dequeue() which will essentially just
try to grab something of qfq's queue.
[ 127.594489][ T453] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 127.594741][ T453] CPU: 2 UID: 0 PID: 453 Comm: ping Not tainted 7.1.0-rc1-00035-gac961974495b-dirty #793 PREEMPT(full)
[ 127.595059][ T453] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 127.595254][ T453] RIP: 0010:qfq_dequeue+0x35c/0x1650 [sch_qfq]
[ 127.595461][ T453] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
[ 127.596081][ T453] RSP: 0018:ffff88810e5af440 EFLAGS: 00010216
[ 127.596337][ T453] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 127.596623][ T453] RDX: 0000000000000009 RSI: 0000001880000000 RDI: ffff888104fd82b0
[ 127.596917][ T453] RBP: ffff888104fd8000 R08: ffff888104fd8280 R09: 1ffff110211893a3
[ 127.597165][ T453] R10: 1ffff110211893a6 R11: 1ffff110211893a7 R12: 0000001880000000
[ 127.597404][ T453] R13: ffff888104fd82b8 R14: 0000000000000048 R15: 0000000040000000
[ 127.597644][ T453] FS: 00007fc380cbfc40(0000) GS:ffff88816f2a8000(0000) knlGS:0000000000000000
[ 127.597956][ T453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 127.598160][ T453] CR2: 00005610aa9890a8 CR3: 000000010369e000 CR4: 0000000000750ef0
[ 127.598390][ T453] PKRU: 55555554
[ 127.598509][ T453] Call Trace:
[ 127.598629][ T453] <TASK>
[ 127.598718][ T453] ? mark_held_locks+0x40/0x70
[ 127.598890][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599053][ T453] sfb_dequeue+0x88/0x4d0
[ 127.599174][ T453] ? ktime_get+0x137/0x230
[ 127.599328][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599480][ T453] ? qdisc_peek_dequeued+0x7b/0x350 [sch_qfq]
[ 127.599670][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599831][ T453] tbf_dequeue+0x6b1/0x1098 [sch_tbf]
[ 127.599988][ T453] __qdisc_run+0x169/0x1900
The right thing to do in #1b is to grab the skb off gso_skb queue.
This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked()
method instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Skip redundant detach on already-detached port
When mana_per_port_queue_reset_work_handler() runs after a previous
detach succeeded but attach failed, the port is left in a detached
state with apc->tx_qp and apc->rxqs already freed. Calling
mana_detach() again unconditionally leads to NULL pointer dereferences
during queue teardown.
Add an early exit in mana_detach() when the port is already in
detached state (!netif_device_present) for non-close callers, making
it safe to call idempotently. This allows the queue reset handler and
other recovery paths to simply retry mana_attach() without redundant
teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: fix locking in .getsockopt
Mirror iucv_sock_setsockopt() and wrap the whole switch in
lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock
becomes redundant and is removed.
Any AF_IUCV HIPER user can potentially crash the kernel by racing
recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences
iucv->hs_dev->mtu after iucv_sock_close() (called from the racing
recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference
oops. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
The change_work was introduced to send device change notifications
from DPLL device callbacks without deadlocking on dpll_lock, since
the callbacks are already invoked under that lock. Now that
__dpll_device_change_ntf() is exported for callers that already
hold dpll_lock, use it directly and remove the change_work
infrastructure entirely.
This eliminates a race condition where change_work could be
re-scheduled after cancel_work_sync() during device teardown,
potentially causing the handler to dereference a freed or NULL
dpll_dev pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_writeback_endio
A crash was observed in zram_writeback_endio due to a NULL pointer
dereference in wake_up. The root cause is a race condition between the
bio completion handler (zram_writeback_endio) and the writeback task.
In zram_writeback_endio, wake_up() is called on &wb_ctl->done_wait after
releasing wb_ctl->done_lock. This creates a race window where the
writeback task can see num_inflight become 0, return, and free wb_ctl
before zram_writeback_endio calls wake_up().
CPU 0 (zram_writeback_endio) CPU 1 (writeback_store)
============================ ============================
zram_writeback_slots
zram_submit_wb_request
zram_submit_wb_request
wait_event(wb_ctl->done_wait)
spin_lock(&wb_ctl->done_lock);
list_add(&req->entry, &wb_ctl->done_reqs);
spin_unlock(&wb_ctl->done_lock);
wake_up(&wb_ctl->done_wait);
zram_complete_done_reqs
spin_lock(&wb_ctl->done_lock);
list_add(&req->entry, &wb_ctl->done_reqs);
spin_unlock(&wb_ctl->done_lock);
while (num_inflight) > 0)
spin_lock(&wb_ctl->done_lock);
list_del(&req->entry);
spin_unlock(&wb_ctl->done_lock);
// num_inflight becomes 0
atomic_dec(num_inflight);
// Leave zram_writeback_slots
// Free wb_ctl
release_wb_ctl(wb_ctl);
// UAF crash!
wake_up(&wb_ctl->done_wait);
This patch fixes this race by using RCU. By protecting wb_ctl with
rcu_read_lock() in zram_writeback_endio and using kfree_rcu() to free it,
we ensure that wb_ctl remains valid during the execution of
zram_writeback_endio. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: fix NULL pointer dereference in team_xmit during mode change
__team_change_mode() clears team->ops with memset() before restoring
safe dummy handlers via team_adjust_ops(). A concurrent team_xmit()
running under RCU on another CPU can read team->ops.transmit during
this window and call a NULL function pointer, crashing the kernel.
The race requires a mode change (CAP_NET_ADMIN) concurrent with
transmit on the team device.
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: 0010 [#1] SMP KASAN NOPTI
RIP: 0010:0x0
Call Trace:
team_xmit (drivers/net/team/team_core.c:1853)
dev_hard_start_xmit (net/core/dev.c:3904)
__dev_queue_xmit (net/core/dev.c:4871)
packet_sendmsg (net/packet/af_packet.c:3109)
__sys_sendto (net/socket.c:2265)
The original code assumed that no ports means no traffic, so mode
changes could freely memset()/memcpy() the ops. AF_PACKET with
forced carrier breaks that assumption.
Prevent the race instead of making it safe: replace memset()/memcpy()
with per-field updates that never touch transmit or receive. Those
two handlers are managed solely by team_adjust_ops(), which already
installs dummies when tx_en_port_count == 0 (always true during mode
change since no ports are present). WRITE_ONCE/READ_ONCE prevent
store/load tearing on the handler pointers.
synchronize_net() before exit_op() drains in-flight readers that may
still reference old mode state from before port removal switched the
handlers to dummies. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: dualpi2: fix GSO backlog accounting
When DualPI2 splits a GSO skb into N segments, it propagates N
additional packets to its parent before returning NET_XMIT_SUCCESS.
The parent then accounts for the original skb once more, leaving its
qlen one larger than the number of packets actually queued.
With QFQ as the parent, after all real packets are dequeued, QFQ still
has a non-zero qlen while its in-service aggregate has no active
classes. qfq_choose_next_agg() returns NULL and qfq_dequeue() passes
the result to qfq_peek_skb(), causing a NULL pointer dereference.
Follow the same pattern used by tbf_segment() and taprio: count only
successfully queued segments, propagate the difference between the
original skb and those segments, and return NET_XMIT_SUCCESS whenever
at least one segment was queued. |
| In nanomq versions 0.24.11 and earlier, a NULL pointer dereference in `properties_parse()` allows an authenticated attacker to crash the NanoMQ broker by sending a POST request to `/api/v4/mqtt/publish` with `user_properties` as a JSON array instead of a JSON object. The crash occurs because `strlen()` is called on a NULL `item->string` pointer when iterating over array elements. An authenticated attacker can exploit this to crash the NanoMQ broker process. This is patched in version 0.24.14. |
| In nanomq versions 0.24.11 and earlier, a NULL pointer dereference in `nni_mqttv5_msg_decode_connect()` allows a malicious MQTT broker to crash any connecting NanoMQ MQTTv5 client (including bridge mode) with a single packet, causing remote denial of service via SIGSEGV. In `nni_mqttv5_msg_decode_connect()` (`mqtt_codec.c:1863`), the code iterates over CONNECT properties using variable `prop` when it should use `will_prop`. When a CONNECT packet has no connect-level properties (`prop == NULL`) but has will properties (`will_prop != NULL`), dereferencing `prop->next` causes SIGSEGV at address `0x38` (NULL + `offsetof(property, next)`).
This affects both `nanomq_cli` and **NanoMQ bridge mode** (Core component), as both use the same `mqtt_client.c` receive path. This can lead to remote DoS if a malicious MQTT broker can crash the client process with a single 35-byte packet and persistent DoS if auto-reconnect causes infinite crash loop. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in compare_guid_key()
session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in proc_show_files()
When a SMB2 client opens a file with a durable v2 handle and then issues
SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the
reconnectable file pointer but leaves the fp registered in global_ft.idr
until the durable scavenger fires (up to fp->durable_timeout seconds
later).
During that window any read of /proc/fs/ksmbd/files (mode 0400) panics
the kernel because proc_show_files() walks global_ft.idr and
unconditionally dereferences fp->tcon->id with no NULL guard.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:proc_show_files+0x118/0x740
Call Trace:
proc_show_files+0x118/0x740
seq_read_iter+0x4ef/0xe10
proc_reg_read_iter+0x1b7/0x280
...
Guard the dereference. A durable-disconnected fp legitimately has no
tcon; report its tree id as 0 rather than oopsing. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Don't setup bogus iov_iter for silencing
At transition to the iov_iter for PCM data transfer, we blindly
applied the iov_iter setup also for silencing (i.e. data = NULL), and
it leads to a calculation of bogus iov_iter. Fortunately this didn't
cause troubles on most of architectures but it goes wrong on RISC-V
now, causing a NULL dereference.
Handle the NULL data case to treat the silencing in interleaved_copy()
for addressing the bug above. noninterleaved_copy() has already the
NULL data handling, so it doesn't need changes. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: add NULL check for idev in ipv6_hop_ioam()
Reported by Sashiko:
The function ipv6_hop_ioam() accesses
__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned
idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr
via RCU, __in6_dev_get() can return NULL during interface teardown, which
could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop
option.
Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot
On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is
reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()
populates V2 entries starting at index 1, so when no V1 device is
selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==
NULL and ism_chid[0] == 0.
smc_v2_determine_accepted_chid() then matches the peer's CHID against
the array starting from index 0 using the CHID alone. A malicious
peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches
the empty slot, ini->ism_selected becomes 0, and the subsequent
ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at
offsetof(struct smcd_dev, lgr_lock) == 0x68:
BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0
Write of size 4 at addr 0000000000000068 by task exploit/144
Call Trace:
_raw_spin_lock_bh
smc_conn_create (net/smc/smc_core.c:1997)
__smc_connect (net/smc/af_smc.c:1447)
smc_connect (net/smc/af_smc.c:1720)
__sys_connect
__x64_sys_connect
do_syscall_64
Require ism_dev[i] to be non-NULL before accepting a CHID match. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
When the TLC notification disables AMSDU for a TID, the MLD driver sets
max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in
iwl_mld_tx_tso_segment() checks for zero but not for this sentinel,
allowing it to reach the num_subframes calculation:
num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad)
= (1 + 2) / (1534 + 2) = 0
This zero propagates to iwl_tx_tso_segment() which sets:
gso_size = num_subframes * mss = 0
Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny
segments from a single GSO skb. This floods the TX ring with ~1024
micro-frames (the rest are purged), creating a massive burst of TX
completion events that can lead to memory corruption and a subsequent
use-after-free in TCP's retransmit queue (refcount underflow in
tcp_shifted_skb, NULL deref in tcp_rack_detect_loss).
The MVM driver is immune because it checks mvmsta->amsdu_enabled before
reaching the num_subframes calculation. The MLD driver has no equivalent
bitmap check and relies solely on max_tid_amsdu_len, which does not
catch the sentinel value.
Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the
existing check and falling back to non-AMSDU TSO segmentation. Also add
a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth
to catch any future code paths that produce zero through a different
mechanism. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: nx - fix nx_crypto_ctx_exit argument
nx_crypto_ctx_shash_exit calls nx_crypto_ctx_exit with crypto_shash_ctx(...)
but crypto_shash_ctx gives a nx_crypto_ctx *, not a crypto_tfm *.
Fix the type in nx_crypto_ctx_exit and drop the bogus crypto_tfm_ctx
call.
This fixes the following oops:
BUG: Unable to handle kernel data access at 0xc0403effffffffc8
Faulting instruction address: 0xc000000000396cb4
Oops: Kernel access of bad area, sig: 11 [#15]
Call Trace:
nx_crypto_ctx_shash_exit+0x24/0x60
crypto_shash_exit_tfm+0x28/0x40
crypto_destroy_tfm+0x98/0x140
crypto_exit_ahash_using_shash+0x20/0x40
crypto_destroy_tfm+0x98/0x140
hash_release+0x1c/0x30
alg_sock_destruct+0x38/0x60
__sk_destruct+0x48/0x2b0
af_alg_release+0x58/0xb0
__sock_release+0x68/0x150
sock_close+0x20/0x40
__fput+0x110/0x3a0
sys_close+0x48/0xa0
system_call_exception+0x140/0x2d0
system_call_common+0xf4/0x258
.. which came from hardlink(1) opportunistically using AF_ALG.
The same problem exists with nx_crypto_ctx_skcipher_exit getting a context
it wasn't expecting, but apparently nobody hit that for years. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
nfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of a
netaddr4 from a GETDEVICEINFO multipath-DS body, then immediately
calls strrchr(buf, '.') to locate the port separator. Both decodes
use xdr_stream_decode_string_dup(), and the current code checks only
"nlen < 0" / "rlen < 0" before dereferencing the returned string.
When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline()
returns 0 and xdr_stream_decode_string_dup() falls through to its
"*str = NULL; return ret" tail, leaving buf NULL with a return value
of 0. The "< 0" check does not catch this, and the next line is
strrchr(NULL, '.'), a kernel NULL pointer dereference reachable from
any pNFS-flexfile client mounted against a malicious or compromised
metadata server.
Reject the zero-length cases explicitly so the decoder fails with
-EBADMSG (treated as a malformed GETDEVICEINFO body) instead of
panicking the client. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject non-VALID session in compound request branch
smb2_check_user_session() takes a shortcut for any operation that is not
the first in a COMPOUND request: it reuses work->sess (the session bound by
the first operation) and validates only the SessionId, then returns
"valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a
SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation
value) skips even the id comparison. The standalone path
(ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does
enforce the VALID state; the compound branch bypasses all of it.
A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes
a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL
(->user is assigned later, by ntlm_authenticate()). Used as operation 1 of
a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX,
\\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and
reaches ksmbd_ipc_tree_connect_request(), which dereferences
user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704)
-> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd
worker for all clients.
Reject any non-first compound operation that lands on a session which is
not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path
enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session,
but it is never carried as a non-first compound operation, so multi-leg
authentication is unaffected by this check. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
info->var, a framebuffer's current mode, is expected to have a matching
entry in info->modelist. var_to_display() relies on this and treats a
failed fb_match_mode() as "This should not happen". fb_set_var() keeps it
true by adding the mode to the list on every change, and
do_register_framebuffer() does the same at registration.
store_modes() replaces the modelist from userspace. fb_new_modelist()
validates the new modes but does not check that info->var still has a
match. It relies on fbcon_new_modelist() to re-point consoles, but that
only handles consoles mapped to the framebuffer. With fbcon unbound there
are none, so info->var is left describing a mode that is no longer in the
list.
A later console takeover runs var_to_display(), where fb_match_mode()
returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it
to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode.
Keep the current mode in the list in fb_new_modelist(), the same way
fb_set_var() does. |
