| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle case when repair happens with dev-replace
[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:
BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
kernel BUG at fs/btrfs/extent_io.c:2380!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
Call Trace:
<TASK>
clean_io_failure+0x14d/0x180 [btrfs]
end_bio_extent_readpage+0x412/0x6e0 [btrfs]
? __switch_to+0x106/0x420
process_one_work+0x1c7/0x380
worker_thread+0x4d/0x380
? rescuer_thread+0x3a0/0x3a0
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
[CAUSE]
Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).
Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.
The check looks like this:
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
&map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);
But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:
if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
!need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
dev_replace->srcdev->devid,
&mirror_num,
&physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}
Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().
But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.
Thus in that case, we don't need to do anything but let the replace
routine to handle it.
[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix wrong resources deallocation order
When trying to destroy QP or CQ, we first decrease the refcount and
potentially free memory regions allocated for the object and then
request the device to destroy the object. If the device fails, the
object isn't fully destroyed so the user/IB core can try to destroy the
object again which will lead to underflow when trying to decrease an
already zeroed refcount.
Deallocate resources in reverse order of allocating them to safely free
them. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init()
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;". Normally, this is done
inside the vdec_msg_queue_deinit() function. However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op. For that situation, just
set the size to zero explicitly and return.
There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't log conflicting inode if it's a dir moved in the current transaction
We can't log a conflicting inode if it's a directory and it was moved
from one parent directory to another parent directory in the current
transaction, as this can result an attempt to have a directory with
two hard links during log replay, one for the old parent directory and
another for the new parent directory.
The following scenario triggers that issue:
1) We have directories "dir1" and "dir2" created in a past transaction.
Directory "dir1" has inode A as its parent directory;
2) We move "dir1" to some other directory;
3) We create a file with the name "dir1" in directory inode A;
4) We fsync the new file. This results in logging the inode of the new file
and the inode for the directory "dir1" that was previously moved in the
current transaction. So the log tree has the INODE_REF item for the
new location of "dir1";
5) We move the new file to some other directory. This results in updating
the log tree to included the new INODE_REF for the new location of the
file and removes the INODE_REF for the old location. This happens
during the rename when we call btrfs_log_new_name();
6) We fsync the file, and that persists the log tree changes done in the
previous step (btrfs_log_new_name() only updates the log tree in
memory);
7) We have a power failure;
8) Next time the fs is mounted, log replay happens and when processing
the inode for directory "dir1" we find a new INODE_REF and add that
link, but we don't remove the old link of the inode since we have
not logged the old parent directory of the directory inode "dir1".
As a result after log replay finishes when we trigger writeback of the
subvolume tree's extent buffers, the tree check will detect that we have
a directory a hard link count of 2 and we get a mount failure.
The errors and stack traces reported in dmesg/syslog are like this:
[ 3845.729764] BTRFS info (device dm-0): start tree-log replay
[ 3845.730304] page: refcount:3 mapcount:0 mapping:000000005c8a3027 index:0x1d00 pfn:0x11510c
[ 3845.731236] memcg:ffff9264c02f4e00
[ 3845.731751] aops:btree_aops [btrfs] ino:1
[ 3845.732300] flags: 0x17fffc00000400a(uptodate|private|writeback|node=0|zone=2|lastcpupid=0x1ffff)
[ 3845.733346] raw: 017fffc00000400a 0000000000000000 dead000000000122 ffff9264d978aea8
[ 3845.734265] raw: 0000000000001d00 ffff92650e6d4738 00000003ffffffff ffff9264c02f4e00
[ 3845.735305] page dumped because: eb page dump
[ 3845.735981] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=6 ino=257, invalid nlink: has 2 expect no more than 1 for dir
[ 3845.737786] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14881 owner 5
[ 3845.737789] BTRFS info (device dm-0): refs 4 lock_owner 0 current 30701
[ 3845.737792] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
[ 3845.737794] inode generation 3 transid 9 size 16 nbytes 16384
[ 3845.737795] block group 0 mode 40755 links 1 uid 0 gid 0
[ 3845.737797] rdev 0 sequence 2 flags 0x0
[ 3845.737798] atime 1764259517.0
[ 3845.737800] ctime 1764259517.572889464
[ 3845.737801] mtime 1764259517.572889464
[ 3845.737802] otime 1764259517.0
[ 3845.737803] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
[ 3845.737805] index 0 name_len 2
[ 3845.737807] item 2 key (256 DIR_ITEM 2363071922) itemoff 16077 itemsize 34
[ 3845.737808] location key (257 1 0) type 2
[ 3845.737810] transid 9 data_len 0 name_len 4
[ 3845.737811] item 3 key (256 DIR_ITEM 2676584006) itemoff 16043 itemsize 34
[ 3845.737813] location key (258 1 0) type 2
[ 3845.737814] transid 9 data_len 0 name_len 4
[ 3845.737815] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34
[ 3845.737816] location key (257 1 0) type 2
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
pps: fix warning in pps_register_cdev when register device fail
Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error
handling in __video_register_device()"), the release hook should be set
before device_register(). Otherwise, when device_register() return error
and put_device() try to callback the release function, the below warning
may happen.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567
Modules linked in:
CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE
RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567
Call Trace:
<TASK>
kobject_cleanup+0x136/0x410 lib/kobject.c:689
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0xe9/0x130 lib/kobject.c:737
put_device+0x24/0x30 drivers/base/core.c:3797
pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402
pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108
pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57
tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432
tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563
tiocsetd drivers/tty/tty_io.c:2429 [inline]
tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Before commit c79a39dc8d06 ("pps: Fix a use-after-free"),
pps_register_cdev() call device_create() to create pps->dev, which will
init dev->release to device_create_release(). Now the comment is outdated,
just remove it.
Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed
in pps_register_source() to avoid a double free in the failure case. |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: fix memory leak of waitqueues in autofs_catatonic_mode
Syzkaller reports a memory leak:
BUG: memory leak
unreferenced object 0xffff88810b279e00 (size 96):
comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'.....
08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'.............
backtrace:
[<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
[<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline]
[<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378
[<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593
[<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619
[<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897
[<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910
[<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline]
[<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline]
[<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
[<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
autofs_wait_queue structs should be freed if their wait_ctr becomes zero.
Otherwise they will be lost.
In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new
waitqueue struct is allocated in autofs_wait(), its initial wait_ctr
equals 2. After that wait_event_killable() is interrupted (it returns
-ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not
satisfied. Actually, this condition can be satisfied when
autofs_wait_release() or autofs_catatonic_mode() is called and, what is
also important, wait_ctr is decremented in those places. Upon the exit of
autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process
begins: kill_sb calls autofs_catatonic_mode(), which should have freed the
waitqueues, but it only decrements its usage counter to zero which is not
a correct behaviour.
edit:imk
This description is of course not correct. The umount performed as a result
of an expire is a umount of a mount that has been automounted, it's not the
autofs mount itself. They happen independently, usually after everything
mounted within the autofs file system has been expired away. If everything
hasn't been expired away the automount daemon can still exit leaving mounts
in place. But expires done in both cases will result in a notification that
calls autofs_wait_release() with a result status. The problem case is the
summary execution of of the automount daemon. In this case any waiting
processes won't be woken up until either they are terminated or the mount
is umounted.
end edit: imk
So in catatonic mode we should free waitqueues which counter becomes zero.
edit: imk
Initially I was concerned that the calling of autofs_wait_release() and
autofs_catatonic_mode() was not mutually exclusive but that can't be the
case (obviously) because the queue entry (or entries) is removed from the
list when either of these two functions are called. Consequently the wait
entry will be freed by only one of these functions or by the woken process
in autofs_wait() depending on the order of the calls.
end edit: imk |
| In the Linux kernel, the following vulnerability has been resolved:
tls: wait for pending async decryptions if tls_strp_msg_hold fails
Async decryption calls tls_strp_msg_hold to create a clone of the
input skb to hold references to the memory it uses. If we fail to
allocate that clone, proceeding with async decryption can lead to
various issues (UAF on the skb, writing into userspace memory after
the recv() call has returned).
In this case, wait for all pending decryption requests. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix bootup splat with separate_gpu_drm modparam
The drm_gem_for_each_gpuvm_bo() call from lookup_vma() accesses
drm_gem_obj.gpuva.list, which is not initialized when the drm driver
does not support DRIVER_GEM_GPUVA feature. Enable it for msm_kms
drm driver to fix the splat seen when msm.separate_gpu_drm=1 modparam
is set:
[ 9.506020] Unable to handle kernel paging request at virtual address fffffffffffffff0
[ 9.523160] Mem abort info:
[ 9.523161] ESR = 0x0000000096000006
[ 9.523163] EC = 0x25: DABT (current EL), IL = 32 bits
[ 9.523165] SET = 0, FnV = 0
[ 9.523166] EA = 0, S1PTW = 0
[ 9.523167] FSC = 0x06: level 2 translation fault
[ 9.523169] Data abort info:
[ 9.523170] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 9.523171] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 9.523172] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 9.523174] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000ad370f000
[ 9.523176] [fffffffffffffff0] pgd=0000000000000000, p4d=0000000ad4787403, pud=0000000ad4788403, pmd=0000000000000000
[ 9.523184] Internal error: Oops: 0000000096000006 [#1] SMP
[ 9.592968] CPU: 9 UID: 0 PID: 448 Comm: (udev-worker) Not tainted 6.17.0-rc4-assorted-fix-00005-g0e9bb53a2282-dirty #3 PREEMPT
[ 9.592970] Hardware name: Qualcomm CRD, BIOS 6.0.240718.BOOT.MXF.2.4-00515-HAMOA-1 07/18/2024
[ 9.592971] pstate: a1400005 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 9.592973] pc : lookup_vma+0x28/0xe0 [msm]
[ 9.592996] lr : get_vma_locked+0x2c/0x128 [msm]
[ 9.763632] sp : ffff800082dab460
[ 9.763666] Call trace:
[ 9.763668] lookup_vma+0x28/0xe0 [msm] (P)
[ 9.763688] get_vma_locked+0x2c/0x128 [msm]
[ 9.763706] msm_gem_get_and_pin_iova_range+0x68/0x11c [msm]
[ 9.763723] msm_gem_get_and_pin_iova+0x18/0x24 [msm]
[ 9.763740] msm_fbdev_driver_fbdev_probe+0xd0/0x258 [msm]
[ 9.763760] __drm_fb_helper_initial_config_and_unlock+0x288/0x528 [drm_kms_helper]
[ 9.763771] drm_fb_helper_initial_config+0x44/0x54 [drm_kms_helper]
[ 9.763779] drm_fbdev_client_hotplug+0x84/0xd4 [drm_client_lib]
[ 9.763782] drm_client_register+0x58/0x9c [drm]
[ 9.763806] drm_fbdev_client_setup+0xe8/0xcf0 [drm_client_lib]
[ 9.763809] drm_client_setup+0xb4/0xd8 [drm_client_lib]
[ 9.763811] msm_drm_kms_post_init+0x2c/0x3c [msm]
[ 9.763830] msm_drm_init+0x1a8/0x22c [msm]
[ 9.763848] msm_drm_bind+0x30/0x3c [msm]
[ 9.919273] try_to_bring_up_aggregate_device+0x168/0x1d4
[ 9.919283] __component_add+0xa4/0x170
[ 9.919286] component_add+0x14/0x20
[ 9.919288] msm_dp_display_probe_tail+0x4c/0xac [msm]
[ 9.919315] msm_dp_auxbus_done_probe+0x14/0x20 [msm]
[ 9.919335] dp_aux_ep_probe+0x4c/0xf0 [drm_dp_aux_bus]
[ 9.919341] really_probe+0xbc/0x298
[ 9.919345] __driver_probe_device+0x78/0x12c
[ 9.919348] driver_probe_device+0x40/0x160
[ 9.919350] __driver_attach+0x94/0x19c
[ 9.919353] bus_for_each_dev+0x74/0xd4
[ 9.919355] driver_attach+0x24/0x30
[ 9.919358] bus_add_driver+0xe4/0x208
[ 9.919360] driver_register+0x60/0x128
[ 9.919363] __dp_aux_dp_driver_register+0x24/0x30 [drm_dp_aux_bus]
[ 9.919365] atana33xc20_init+0x20/0x1000 [panel_samsung_atna33xc20]
[ 9.919370] do_one_initcall+0x6c/0x1b0
[ 9.919374] do_init_module+0x58/0x234
[ 9.919377] load_module+0x19cc/0x1bd4
[ 9.919380] init_module_from_file+0x84/0xc4
[ 9.919382] __arm64_sys_finit_module+0x1b8/0x2cc
[ 9.919384] invoke_syscall+0x48/0x110
[ 9.919389] el0_svc_common.constprop.0+0xc8/0xe8
[ 9.919393] do_el0_svc+0x20/0x2c
[ 9.919396] el0_svc+0x34/0xf0
[ 9.919401] el0t_64_sync_handler+0xa0/0xe4
[ 9.919403] el0t_64_sync+0x198/0x19c
[ 9.919407] Code: eb0000bf 54000480 d100a003 aa0303e2 (f8418c44)
[ 9.919410] ---[ end trace 0000000000000000 ]---
Patchwork: https://patchwork.freedesktop.org/pa
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm flakey: don't corrupt the zero page
When we need to zero some range on a block device, the function
__blkdev_issue_zero_pages submits a write bio with the bio vector pointing
to the zero page. If we use dm-flakey with corrupt bio writes option, it
will corrupt the content of the zero page which results in crashes of
various userspace programs. Glibc assumes that memory returned by mmap is
zeroed and it uses it for calloc implementation; if the newly mapped
memory is not zeroed, calloc will return non-zeroed memory.
Fix this bug by testing if the page is equal to ZERO_PAGE(0) and
avoiding the corruption in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: fix missing hfs_bnode_get() in __hfs_bnode_create
Syzbot found a kernel BUG in hfs_bnode_put():
kernel BUG at fs/hfs/bnode.c:466!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3634 Comm: kworker/u4:5 Not tainted 6.1.0-rc7-syzkaller-00190-g97ee9d1c1696 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: writeback wb_workfn (flush-7:0)
RIP: 0010:hfs_bnode_put+0x46f/0x480 fs/hfs/bnode.c:466
Code: 8a 80 ff e9 73 fe ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a0 fe ff ff 48 89 df e8 db 8a 80 ff e9 93 fe ff ff e8 a1 68 2c ff <0f> 0b e8 9a 68 2c ff 0f 0b 0f 1f 84 00 00 00 00 00 55 41 57 41 56
RSP: 0018:ffffc90003b4f258 EFLAGS: 00010293
RAX: ffffffff825e318f RBX: 0000000000000000 RCX: ffff8880739dd7c0
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90003b4f430 R08: ffffffff825e2d9b R09: ffffed10045157d1
R10: ffffed10045157d1 R11: 1ffff110045157d0 R12: ffff8880228abe80
R13: ffff88807016c000 R14: dffffc0000000000 R15: ffff8880228abe00
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa6ebe88718 CR3: 000000001e93d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
hfs_write_inode+0x1bc/0xb40
write_inode fs/fs-writeback.c:1440 [inline]
__writeback_single_inode+0x4d6/0x670 fs/fs-writeback.c:1652
writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1878
__writeback_inodes_wb+0x125/0x420 fs/fs-writeback.c:1949
wb_writeback+0x440/0x7b0 fs/fs-writeback.c:2054
wb_check_start_all fs/fs-writeback.c:2176 [inline]
wb_do_writeback fs/fs-writeback.c:2202 [inline]
wb_workfn+0x827/0xef0 fs/fs-writeback.c:2235
process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
The BUG_ON() is triggered at here:
/* Dispose of resources used by a node */
void hfs_bnode_put(struct hfs_bnode *node)
{
if (node) {
<skipped>
BUG_ON(!atomic_read(&node->refcnt)); <- we have issue here!!!!
<skipped>
}
}
By tracing the refcnt, I found the node is created by hfs_bmap_alloc()
with refcnt 1. Then the node is used by hfs_btree_write(). There is a
missing of hfs_bnode_get() after find the node. The issue happened in
following path:
<alloc>
hfs_bmap_alloc
hfs_bnode_find
__hfs_bnode_create <- allocate a new node with refcnt 1.
hfs_bnode_put <- decrease the refcnt
<write>
hfs_btree_write
hfs_bnode_find
__hfs_bnode_create
hfs_bnode_findhash <- find the node without refcnt increased.
hfs_bnode_put <- trigger the BUG_ON() since refcnt is 0. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd937x: set the comp soundwire port correctly
For some reason we endup with setting soundwire port for
HPHL_COMP and HPHR_COMP as zero, this can potentially result
in a memory corruption due to accessing and setting -1 th element of
port_map array. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix locking for runpm vs reclaim
For cases where icc_bw_set() can be called in callbaths that could
deadlock against shrinker/reclaim, such as runpm resume, we need to
decouple the icc locking. Introduce a new icc_bw_lock for cases where
we need to serialize bw aggregation and update to decouple that from
paths that require memory allocation such as node/link creation/
destruction.
Fixes this lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc8-debug+ #554 Not tainted
------------------------------------------------------
ring0/132 is trying to acquire lock:
ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234
but task is already holding lock:
ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (dma_fence_map){++++}-{0:0}:
__dma_fence_might_wait+0x74/0xc0
dma_resv_lockdep+0x1f4/0x2f4
do_one_initcall+0x104/0x2bc
kernel_init_freeable+0x344/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
fs_reclaim_acquire+0x80/0xa8
slab_pre_alloc_hook.constprop.0+0x40/0x25c
__kmem_cache_alloc_node+0x60/0x1cc
__kmalloc+0xd8/0x100
topology_parse_cpu_capacity+0x8c/0x178
get_cpu_for_node+0x88/0xc4
parse_cluster+0x1b0/0x28c
parse_cluster+0x8c/0x28c
init_cpu_topology+0x168/0x188
smp_prepare_cpus+0x24/0xf8
kernel_init_freeable+0x18c/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #2 (fs_reclaim){+.+.}-{0:0}:
__fs_reclaim_acquire+0x3c/0x48
fs_reclaim_acquire+0x54/0xa8
slab_pre_alloc_hook.constprop.0+0x40/0x25c
__kmem_cache_alloc_node+0x60/0x1cc
__kmalloc+0xd8/0x100
kzalloc.constprop.0+0x14/0x20
icc_node_create_nolock+0x4c/0xc4
icc_node_create+0x38/0x58
qcom_icc_rpmh_probe+0x1b8/0x248
platform_probe+0x70/0xc4
really_probe+0x158/0x290
__driver_probe_device+0xc8/0xe0
driver_probe_device+0x44/0x100
__driver_attach+0xf8/0x108
bus_for_each_dev+0x78/0xc4
driver_attach+0x2c/0x38
bus_add_driver+0xd0/0x1d8
driver_register+0xbc/0xf8
__platform_driver_register+0x30/0x3c
qnoc_driver_init+0x24/0x30
do_one_initcall+0x104/0x2bc
kernel_init_freeable+0x344/0x34c
kernel_init+0x30/0x134
ret_from_fork+0x10/0x20
-> #1 (icc_lock){+.+.}-{3:3}:
__mutex_lock+0xcc/0x3c8
mutex_lock_nested+0x30/0x44
icc_set_bw+0x88/0x2b4
_set_opp_bw+0x8c/0xd8
_set_opp+0x19c/0x300
dev_pm_opp_set_opp+0x84/0x94
a6xx_gmu_resume+0x18c/0x804
a6xx_pm_resume+0xf8/0x234
adreno_runtime_resume+0x2c/0x38
pm_generic_runtime_resume+0x30/0x44
__rpm_callback+0x15c/0x174
rpm_callback+0x78/0x7c
rpm_resume+0x318/0x524
__pm_runtime_resume+0x78/0xbc
adreno_load_gpu+0xc4/0x17c
msm_open+0x50/0x120
drm_file_alloc+0x17c/0x228
drm_open_helper+0x74/0x118
drm_open+0xa0/0x144
drm_stub_open+0xd4/0xe4
chrdev_open+0x1b8/0x1e4
do_dentry_open+0x2f8/0x38c
vfs_open+0x34/0x40
path_openat+0x64c/0x7b4
do_filp_open+0x54/0xc4
do_sys_openat2+0x9c/0x100
do_sys_open+0x50/0x7c
__arm64_sys_openat+0x28/0x34
invoke_syscall+0x8c/0x128
el0_svc_common.constprop.0+0xa0/0x11c
do_el0_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mips: bmips: BCM6358: disable RAC flush for TP1
RAC flush causes kernel panics on BCM6358 with EHCI/OHCI when booting from TP1:
[ 3.881739] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 3.895011] Reserved instruction in kernel code[#1]:
[ 3.900113] CPU: 0 PID: 1 Comm: init Not tainted 5.10.16 #0
[ 3.905829] $ 0 : 00000000 10008700 00000000 77d94060
[ 3.911238] $ 4 : 7fd1f088 00000000 81431cac 81431ca0
[ 3.916641] $ 8 : 00000000 ffffefff 8075cd34 00000000
[ 3.922043] $12 : 806f8d40 f3e812b7 00000000 000d9aaa
[ 3.927446] $16 : 7fd1f068 7fd1f080 7ff559b8 81428470
[ 3.932848] $20 : 00000000 00000000 55590000 77d70000
[ 3.938251] $24 : 00000018 00000010
[ 3.943655] $28 : 81430000 81431e60 81431f28 800157fc
[ 3.949058] Hi : 00000000
[ 3.952013] Lo : 00000000
[ 3.955019] epc : 80015808 setup_sigcontext+0x54/0x24c
[ 3.960464] ra : 800157fc setup_sigcontext+0x48/0x24c
[ 3.965913] Status: 10008703 KERNEL EXL IE
[ 3.970216] Cause : 00800028 (ExcCode 0a)
[ 3.974340] PrId : 0002a010 (Broadcom BMIPS4350)
[ 3.979170] Modules linked in: ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[ 3.992907] Process init (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=77e22ec8)
[ 4.000776] Stack : 81431ef4 7fd1f080 81431f28 81428470 7fd1f068 81431edc 7ff559b8 81428470
[ 4.009467] 81431f28 7fd1f080 55590000 77d70000 77d5498c 80015c70 806f0000 8063ae74
[ 4.018149] 08100002 81431f28 0000000a 08100002 81431f28 0000000a 77d6b418 00000003
[ 4.026831] ffffffff 80016414 80080734 81431ecc 81431ecc 00000001 00000000 04000000
[ 4.035512] 77d54874 00000000 00000000 00000000 00000000 00000012 00000002 00000000
[ 4.044196] ...
[ 4.046706] Call Trace:
[ 4.049238] [<80015808>] setup_sigcontext+0x54/0x24c
[ 4.054356] [<80015c70>] setup_frame+0xdc/0x124
[ 4.059015] [<80016414>] do_notify_resume+0x1dc/0x288
[ 4.064207] [<80011b50>] work_notifysig+0x10/0x18
[ 4.069036]
[ 4.070538] Code: 8fc300b4 00001025 26240008 <ac820000> ac830004 3c048063 0c0228aa 24846a00 26240010
[ 4.080686]
[ 4.082517] ---[ end trace 22a8edb41f5f983b ]---
[ 4.087374] Kernel panic - not syncing: Fatal exception
[ 4.092753] Rebooting in 1 seconds..
Because the bootloader (CFE) is not initializing the Read-ahead cache properly
on the second thread (TP1). Since the RAC was not initialized properly, we
should avoid flushing it at the risk of corrupting the instruction stream as
seen in the trace above. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
The state->timer is a cyclic timer that schedules work_i2c_poll and
delayed_work_enable_hotplug, while rearming itself. Using timer_delete()
fails to guarantee the timer isn't still running when destroyed, similarly
cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has
terminated if already executing. During probe failure after timer
initialization, these may continue running as orphans and reference the
already-freed tc358743_state object through tc358743_irq_poll_timer.
The following is the trace captured by KASAN.
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __pfx_sched_balance_find_src_group+0x10/0x10
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? tmigr_update_events+0x280/0x740
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x98/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_node_track_caller_noprof+0x198/0x430
devm_kmalloc+0x7b/0x1e0
tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
release_nodes+0xa4/0x100
devres_release_group+0x1b2/0x380
i2c_device_probe+0x694/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace timer_delete() with timer_delete_sync() and cancel_delayed_work()
with cancel_delayed_work_sync() to ensure proper termination of timer and
work items before resource cleanup.
This bug was initially identified through static analysis. For reproduction
and testing, I created a functional emulation of the tc358743 device via a
kernel module and introduced faults through the debugfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix possible map leak in fastrpc_put_args
copy_to_user() failure would cause an early return without cleaning up
the fdlist, which has been updated by the DSP. This could lead to map
leak. Fix this by redirecting to a cleanup path on failure, ensuring
that all mapped buffers are properly released before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Prevent shift wrapping in set_user_sq_size()
The ucmd->log_sq_bb_count variable is controlled by the user so this
shift can wrap. Fix it by using check_shl_overflow() in the same way
that it was done in commit 515f60004ed9 ("RDMA/hns: Prevent undefined
behavior in hns_roce_set_user_sq_size()"). |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: mm: Move initrd phys_to_virt handling after paging_init()
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/bpf: Fix buffer overflow in tcp_basertt
Using sizeof(nv) or strlen(nv)+1 is correct. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
When platform firmware supplies error information to the OS, e.g., via the
ACPI APEI GHES mechanism, it may identify an error source device that
doesn't advertise an AER Capability and therefore dev->aer_info, which
contains AER stats and ratelimiting data, is NULL.
pci_dev_aer_stats_incr() already checks dev->aer_info for NULL, but
aer_ratelimit() did not, leading to NULL pointer dereferences like this one
from the URL below:
{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
{1}[Hardware Error]: event severity: corrected
{1}[Hardware Error]: device_id: 0000:00:00.0
{1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2020
{1}[Hardware Error]: aer_cor_status: 0x00001000, aer_cor_mask: 0x00002000
BUG: kernel NULL pointer dereference, address: 0000000000000264
RIP: 0010:___ratelimit+0xc/0x1b0
pci_print_aer+0x141/0x360
aer_recover_work_func+0xb5/0x130
[8086:2020] is an Intel "Sky Lake-E DMI3 Registers" device that claims to
be a Root Port but does not advertise an AER Capability.
Add a NULL check in aer_ratelimit() to avoid the NULL pointer dereference.
Note that this also prevents ratelimiting these events from GHES.
[bhelgaas: add crash details to commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix double unregister of HCA_PORTS component
Clear hca_devcom_comp in device's private data after unregistering it in
LAG teardown. Otherwise a slightly lagging second pass through
mlx5_unload_one() might try to unregister it again and trip over
use-after-free.
On s390 almost all PCI level recovery events trigger two passes through
mxl5_unload_one() - one through the poll_health() method and one through
mlx5_pci_err_detected() as callback from generic PCI error recovery.
While testing PCI error recovery paths with more kernel debug features
enabled, this issue reproducibly led to kernel panics with the following
call chain:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803 ESOP-2 FSI
Fault in home space mode while using kernel ASCE.
AS:00000000705c4007 R3:0000000000000024
Oops: 0038 ilc:3 [#1]SMP
CPU: 14 UID: 0 PID: 156 Comm: kmcheck Kdump: loaded Not tainted
6.18.0-20251130.rc7.git0.16131a59cab1.300.fc43.s390x+debug #1 PREEMPT
Krnl PSW : 0404e00180000000 0000020fc86aa1dc (__lock_acquire+0x5c/0x15f0)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000000 0000020f00000001 6b6b6b6b6b6b6c33 0000000000000000
0000000000000000 0000000000000000 0000000000000001 0000000000000000
0000000000000000 0000020fca28b820 0000000000000000 0000010a1ced8100
0000010a1ced8100 0000020fc9775068 0000018fce14f8b8 0000018fce14f7f8
Krnl Code: 0000020fc86aa1cc: e3b003400004 lg %r11,832
0000020fc86aa1d2: a7840211 brc 8,0000020fc86aa5f4
*0000020fc86aa1d6: c09000df0b25 larl %r9,0000020fca28b820
>0000020fc86aa1dc: d50790002000 clc 0(8,%r9),0(%r2)
0000020fc86aa1e2: a7840209 brc 8,0000020fc86aa5f4
0000020fc86aa1e6: c0e001100401 larl %r14,0000020fca8aa9e8
0000020fc86aa1ec: c01000e25a00 larl %r1,0000020fca2f55ec
0000020fc86aa1f2: a7eb00e8 aghi %r14,232
Call Trace:
__lock_acquire+0x5c/0x15f0
lock_acquire.part.0+0xf8/0x270
lock_acquire+0xb0/0x1b0
down_write+0x5a/0x250
mlx5_detach_device+0x42/0x110 [mlx5_core]
mlx5_unload_one_devl_locked+0x50/0xc0 [mlx5_core]
mlx5_unload_one+0x42/0x60 [mlx5_core]
mlx5_pci_err_detected+0x94/0x150 [mlx5_core]
zpci_event_attempt_error_recovery+0xcc/0x388 |
