| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Matter (aka connectedhomeip or Project CHIP) through 1.4.0.0 before e3277eb, unlimited user label appends in a userlabel cluster can lead to a denial of service (resource exhaustion). |
| Resolver caches and authoritative zone databases that hold significant numbers of RRs for the same hostname (of any RTYPE) can suffer from degraded performance as content is being added or updated, and also when handling client queries for this name.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.4-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"
I've found that pynfs COMP6 now leaves the connection or lease in a
strange state, which causes CLOSE9 to hang indefinitely. I've dug
into it a little, but I haven't been able to root-cause it yet.
However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on
number of operations per NFSv4 COMPOUND").
Tianshuo Han also reports a potential vulnerability when decoding
an NFSv4 COMPOUND. An attacker can place an arbitrarily large op
count in the COMPOUND header, which results in:
[ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total
pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO),
nodemask=(null),cpuset=/,mems_allowed=0
when NFSD attempts to allocate the COMPOUND op array.
Let's restore the operation-per-COMPOUND limit, but increased to 200
for now. |
| Vickey is a Misskey-based microblogging platform. A vulnerability exists in Vickey prior to version 2025.10.0 where unexpired email confirmation links can be reused multiple times to send repeated confirmation emails to a verified email address. Under certain conditions, a verified email address could receive repeated confirmation messages if the verification link was accessed multiple times. This issue may result in unintended email traffic but does not expose user data. The issue was addressed in version 2025.10.0 by improving validation logic to ensure verification links behave as expected after completion. |
| An unauthenticated remote attacker can cause a Denial of Service by sending a large number of requests to the http service on port 80. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. |
| If exploited, this vulnerability could cause a SuiteLink server to consume excessive system resources and slow down processing of Data I/O for the duration of the attack. |
| Aerohive HiveOS contains a denial of service vulnerability in the NetConfig UI that allows unauthenticated attackers to render the web interface unusable. Attackers can send a crafted HTTP request to the action.php5 script with specific parameters to trigger a 5-minute service disruption. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). The affected application does not properly limit the size of specific logs. This could allow an unauthenticated remote attacker to exhaust system resources by creating a great number of log entries which could potentially lead to a denial of service condition. A successful exploitation requires the attacker to have access to specific SIMATIC RTLS Locating Manager Clients in the deployment. |
| Filetto 1.0 FTP server contains a denial of service vulnerability in the FEAT command processing that allows attackers to crash the service. Attackers can send an oversized FEAT command with 11,008 bytes of repeated characters to trigger a buffer overflow and terminate the FTP service. |
| The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. A vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically due to internal optimizations being frequently bypassed. The query planner includes an optimization that significantly speeds up planning for applicable GraphQL selections. However, queries with deeply nested and reused named fragments can generate many selections where this optimization does not apply, leading to significantly longer planning times. Because the query planner does not enforce a timeout, a small number of such queries can exhaust router's thread pool, rendering it inoperable. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1. |
| BunnyPad is a note taking software. Prior to version 11.0.27000.0915, opening files greater than or equal to 20MB causes buffer overflow to occur. This issue has been patched in version 11.0.27000.0915. Users who wish not to upgrade should refrain from opening files larger than 10MB. |
| If a server hosts a zone containing a "KEY" Resource Record, or a resolver DNSSEC-validates a "KEY" Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests.
This issue affects BIND 9 versions 9.0.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.49-S1, and 9.18.11-S1 through 9.18.27-S1. |
| A vulnerability in danswer-ai/danswer version 0.9.0 allows for denial of service through memory exhaustion. The issue arises from the use of a vulnerable version of the starlette package (<=0.49) via fastapi, which was patched in fastapi version 0.115.3. The vulnerability can be exploited by sending multiple requests to the /auth/saml/callback endpoint, leading to uncontrolled memory consumption and eventual denial of service. |
| Centova Cast 3.2.12 contains a denial of service vulnerability that allows attackers to overwhelm the system by repeatedly calling the database export API endpoint. Attackers can trigger 100% CPU load by sending multiple concurrent requests to the /api.php endpoint with crafted parameters. |
| EasyFlow GP developed by Digiwin has a Denial of service vulnerability, allowing unauthenticated remote attackers to send specific requests that result in denial of web service. |
| Volcano is a Kubernetes-native batch scheduling system. Prior to versions 1.11.2, 1.10.2, 1.9.1, 1.11.0-network-topology-preview.3, and 1.12.0-alpha.2, attacker compromise of either the Elastic service or the extender plugin can cause denial of service of the scheduler. This is a privilege escalation, because Volcano users may run their Elastic service and extender plugins in separate pods or nodes from the scheduler. In the Kubernetes security model, node isolation is a security boundary, and as such an attacker is able to cross that boundary in Volcano's case if they have compromised either the vulnerable services or the pod/node in which they are deployed. The scheduler will become unavailable to other users and workloads in the cluster. The scheduler will either crash with an unrecoverable OOM panic or freeze while consuming excessive amounts of memory. This issue has been patched in versions 1.11.2, 1.10.2, 1.9.1, 1.11.0-network-topology-preview.3, and 1.12.0-alpha.2. |
| python-multipart is a streaming multipart parser for Python. When parsing form data, python-multipart skips line breaks (CR \r or LF \n) in front of the first boundary and any tailing bytes after the last boundary. This happens one byte at a time and emits a log event each time, which may cause excessive logging for certain inputs. An attacker could abuse this by sending a malicious request with lots of data before the first or after the last boundary, causing high CPU load and stalling the processing thread for a significant amount of time. In case of ASGI application, this could stall the event loop and prevent other requests from being processed, resulting in a denial of service (DoS). This vulnerability is fixed in 0.0.18. |
| The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Prior to 1.61.2 and 2.1.1, a vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically during named fragment expansion. Named fragments were being expanded once per fragment spread during query planning, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1. |
| Starlette is an Asynchronous Server Gateway Interface (ASGI) framework/toolkit. Prior to version 0.40.0, Starlette treats `multipart/form-data` parts without a `filename` as text form fields and buffers those in byte strings with no size limit. This allows an attacker to upload arbitrary large form fields and cause Starlette to both slow down significantly due to excessive memory allocations and copy operations, and also consume more and more memory until the server starts swapping and grinds to a halt, or the OS terminates the server process with an OOM error. Uploading multiple such requests in parallel may be enough to render a service practically unusable, even if reasonable request size limits are enforced by a reverse proxy in front of Starlette. This Denial of service (DoS) vulnerability affects all applications built with Starlette (or FastAPI) accepting form requests. Verison 0.40.0 fixes this issue. |
