| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader. |
| Large handshake records may cause panics in crypto/tls. Both clients and servers may send large TLS handshake records which cause servers and clients, respectively, to panic when attempting to construct responses. This affects all TLS 1.3 clients, TLS 1.2 clients which explicitly enable session resumption (by setting Config.ClientSessionCache to a non-nil value), and TLS 1.3 servers which request client certificates (by setting Config.ClientAuth >= RequestClientCert). |
| An uncontrolled resource consumption flaw was found in openstack-neutron. This flaw allows a remote authenticated user to query a list of security groups for an invalid project. This issue creates resources that are unconstrained by the user's quota. If a malicious user were to submit a significant number of requests, this could lead to a denial of service. |
| A flaw was found in openstack-glance. This issue could allow a remote, authenticated attacker to tamper with images, compromising the integrity of virtual machines created using these modified images. |
| A flaw was found in tripleo-ansible. Due to an insecure default configuration, the permissions of a sensitive file are not sufficiently restricted. This flaw allows a local attacker to use brute force to explore the relevant directory and discover the file, leading to information disclosure of important configuration details from the OpenStack deployment. |
| A flaw was found in tripleo-ansible. Due to an insecure default configuration, the permissions of a sensitive file are not sufficiently restricted. This flaw allows a local attacker to use brute force to explore the relevant directory and discover the file. This issue leads to information disclosure of important configuration details from the OpenStack deployment. |
| Authentication vulnerability found in Etcd-io v.3.4.10 allows remote attackers to escalate privileges via the debug function. |
| A flaw was found in Open vSwitch that allows ICMPv6 Neighbor Advertisement packets between virtual machines to bypass OpenFlow rules. This issue may allow a local attacker to create specially crafted packets with a modified or spoofed target IP address field that can redirect ICMPv6 traffic to arbitrary IP addresses. |
| RabbitMQ is a multi-protocol messaging and streaming broker. HTTP API did not enforce an HTTP request body limit, making it vulnerable for denial of service (DoS) attacks with very large messages. An authenticated user with sufficient credentials can publish a very large messages over the HTTP API and cause target node to be terminated by an "out-of-memory killer"-like mechanism. This vulnerability has been patched in versions 3.11.24 and 3.12.7. |
| Before Go 1.20, the RSA based TLS key exchanges used the math/big library, which is not constant time. RSA blinding was applied to prevent timing attacks, but analysis shows this may not have been fully effective. In particular it appears as if the removal of PKCS#1 padding may leak timing information, which in turn could be used to recover session key bits. In Go 1.20, the crypto/tls library switched to a fully constant time RSA implementation, which we do not believe exhibits any timing side channels. |
| A malicious HTTP sender can use chunk extensions to cause a receiver reading from a request or response body to read many more bytes from the network than are in the body. A malicious HTTP client can further exploit this to cause a server to automatically read a large amount of data (up to about 1GiB) when a handler fails to read the entire body of a request. Chunk extensions are a little-used HTTP feature which permit including additional metadata in a request or response body sent using the chunked encoding. The net/http chunked encoding reader discards this metadata. A sender can exploit this by inserting a large metadata segment with each byte transferred. The chunk reader now produces an error if the ratio of real body to encoded bytes grows too small. |
| A malicious HTTP/2 client which rapidly creates requests and immediately resets them can cause excessive server resource consumption. While the total number of requests is bounded by the http2.Server.MaxConcurrentStreams setting, resetting an in-progress request allows the attacker to create a new request while the existing one is still executing. With the fix applied, HTTP/2 servers now bound the number of simultaneously executing handler goroutines to the stream concurrency limit (MaxConcurrentStreams). New requests arriving when at the limit (which can only happen after the client has reset an existing, in-flight request) will be queued until a handler exits. If the request queue grows too large, the server will terminate the connection. This issue is also fixed in golang.org/x/net/http2 for users manually configuring HTTP/2. The default stream concurrency limit is 250 streams (requests) per HTTP/2 connection. This value may be adjusted using the golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams setting and the ConfigureServer function. |
| QUIC connections do not set an upper bound on the amount of data buffered when reading post-handshake messages, allowing a malicious QUIC connection to cause unbounded memory growth. With fix, connections now consistently reject messages larger than 65KiB in size. |
| Processing an incomplete post-handshake message for a QUIC connection can cause a panic. |
| The html/template package does not apply the proper rules for handling occurrences of "<script", "<!--", and "</script" within JS literals in <script> contexts. This may cause the template parser to improperly consider script contexts to be terminated early, causing actions to be improperly escaped. This could be leveraged to perform an XSS attack. |
| The html/template package does not properly handle HTML-like "" comment tokens, nor hashbang "#!" comment tokens, in <script> contexts. This may cause the template parser to improperly interpret the contents of <script> contexts, causing actions to be improperly escaped. This may be leveraged to perform an XSS attack. |
| A flaw was found in the QEMU built-in VNC server. When a client connects to the VNC server, QEMU checks whether the current number of connections crosses a certain threshold and if so, cleans up the previous connection. If the previous connection happens to be in the handshake phase and fails, QEMU cleans up the connection again, resulting in a NULL pointer dereference issue. This could allow a remote unauthenticated client to cause a denial of service. |
| A flaw was found in QEMU. The async nature of hot-unplug enables a race scenario where the net device backend is cleared before the virtio-net pci frontend has been unplugged. A malicious guest could use this time window to trigger an assertion and cause a denial of service. |
| Flask is a lightweight WSGI web application framework. When all of the following conditions are met, a response containing data intended for one client may be cached and subsequently sent by the proxy to other clients. If the proxy also caches `Set-Cookie` headers, it may send one client's `session` cookie to other clients. The severity depends on the application's use of the session and the proxy's behavior regarding cookies. The risk depends on all these conditions being met.
1. The application must be hosted behind a caching proxy that does not strip cookies or ignore responses with cookies.
2. The application sets `session.permanent = True`
3. The application does not access or modify the session at any point during a request.
4. `SESSION_REFRESH_EACH_REQUEST` enabled (the default).
5. The application does not set a `Cache-Control` header to indicate that a page is private or should not be cached.
This happens because vulnerable versions of Flask only set the `Vary: Cookie` header when the session is accessed or modified, not when it is refreshed (re-sent to update the expiration) without being accessed or modified. This issue has been fixed in versions 2.3.2 and 2.2.5. |
| Extremely large RSA keys in certificate chains can cause a client/server to expend significant CPU time verifying signatures. With fix, the size of RSA keys transmitted during handshakes is restricted to <= 8192 bits. Based on a survey of publicly trusted RSA keys, there are currently only three certificates in circulation with keys larger than this, and all three appear to be test certificates that are not actively deployed. It is possible there are larger keys in use in private PKIs, but we target the web PKI, so causing breakage here in the interests of increasing the default safety of users of crypto/tls seems reasonable. |
