| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: stop device IO before hid_hw_stop on probe failure
nintendo_hid_probe() calls hid_device_io_start() before joycon_init()
and joycon_leds_create(). If either fails, the error path jumps to
err_close which calls hid_hw_close()/hid_hw_stop() without first calling
hid_device_io_stop().
hid_hw_stop() does not stop device IO, so hid_input_report() may still
run and access driver data that is being torn down, resulting in a
use-after-free.
Add an err_io_stop label that calls hid_device_io_stop() before
hid_hw_close(), and point the two post-io_start error paths at it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usbdev_release() drops its reference to the struct usb_device before
draining the list of completed async URBs, but that drain path reads back
through the same object: free_async() calls dec_usb_memory_use_count()
for any URB whose buffer came from the usbfs mmap() region, and its first
statement is bus_to_hcd(ps->dev->bus).
After a disconnect the usbfs reference can be the last one, in which case
usb_put_dev() frees the device and the subsequent loop reads offset 80 of
freed memory and uses the result as a struct usb_hcd *, which
hcd_buffer_free_pages() then dereferences.
This is reachable by an unprivileged process that has read/write access to
a /dev/bus/usb node: mmap() the fd, submit one URB with a buffer inside the
mapping, wait for the device to be unplugged, then munmap() and close().
It reproduces on every attempt rather than being a race, because a live
MAP_SHARED vma holds a reference on the struct file, so usbdev_release()
cannot run until the last vma is gone and the freeing branch of
dec_usb_memory_use_count() is always taken.
BUG: KASAN: slab-use-after-free in dec_usb_memory_use_count+0x3ae/0x410
Read of size 8 at addr ffff8880122ee050 by task poc/769
CPU: 1 UID: 1000 PID: 769 Comm: poc Tainted: G B 6.12.94 #3
Call Trace:
dec_usb_memory_use_count+0x3ae/0x410
free_async+0x2aa/0x4f0
usbdev_release+0x375/0x460
__fput+0x3ea/0xb50
__x64_sys_close+0x86/0x100
Allocated by task 11:
usb_alloc_dev+0x55/0xd90
hub_event+0x2524/0x43d0
Freed by task 769:
kfree+0x121/0x360
device_release+0xd2/0x280
usb_put_dev+0x23/0x30
usbdev_release+0x2d8/0x460
Release the device reference after the drain loop instead. Nothing between
the two points requires it to have been dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_flush() replay
SMB2_flush() keeps its response buffer bookkeeping across replay
attempts. If a replayable flush response is received and the retry then
fails before cifs_send_recv() stores a replacement response, flush_exit
will free the stale response pointer a second time.
Reinitialize resp_buftype and rsp_iov at the top of the replay loop so
cleanup only acts on response state produced by the current attempt.
This fixes a double-free without changing replay handling for successful
requests. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_ioctl() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_ioctl_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: sof-audio: Fix error path in sof_widget_setup_unlocked()
If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget
setup we would double decrement the use_count of the widget because the
sof_widget_free_unlocked() would be called twice, similarly the core_put
would be invoked twice as well.
Since the use_count and core_put() is handled within the widget_free
function we need to return without falling through the pipe_widget_free
label.
The fixes tag is picked to the last change around this part of the code
which is adequately old enough for backporting purposes. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: letsketch: fix UAF on inrange_timer at driver unbind
letsketch_driver does not provide a .remove callback, but
letsketch_probe() arms a per-device timer:
timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0);
The timer is re-armed from letsketch_raw_event() with a 100 ms
timeout on every pen-in-range report, and its callback dereferences
data->input_tablet to deliver a synthetic BTN_TOOL_PEN release.
letsketch_data is allocated with devm_kzalloc(), and its input_dev
fields are devm-allocated via letsketch_setup_input_tablet(). On
device unbind (USB unplug or rmmod), the HID core runs its default
teardown and devm cleanup frees both letsketch_data and the input
devices. Because no .remove callback exists, nothing drains the
timer first: if raw_event armed it within ~100 ms of the unbind,
the pending timer fires on freed memory. This is a UAF read of
data and of data->input_tablet, followed by input_report_key() /
input_sync() into the freed input_dev.
The same problem can occur on the probe error path: if
hid_hw_start() enabled I/O on an always-poll-quirk device and then
failed, raw_event may have armed the timer before devm releases
data.
Fix by adding a .remove callback that calls hid_hw_stop() first.
hid_hw_stop() synchronously kills the URBs that deliver raw_event(),
so once it returns no path can re-arm the timer. timer_shutdown_sync()
then drains any in-flight callback and permanently disables further
mod_timer() calls. Apply the same timer_shutdown_sync() in the probe
error path so the timer is guaranteed not to outlive data. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/tas2781: Cancel async firmware request at unbind
TAS2781 HDA I2C and SPI queue RCA firmware loading from component
bind with request_firmware_nowait(). The firmware loader keeps the
callback module pinned and holds a device reference, but the callback
still uses driver-private HDA state.
Component unbind removes controls and DSP state immediately. Later
device removal tears down the TAS2781 private data, including
codec_lock. If the async firmware callback runs after unbind has
started, it can operate on state that is being torn down.
Cancel or synchronize the async firmware request before removing
controls and DSP state. A queued callback is cancelled, and an
already-running callback is allowed to finish before unbind continues. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
br_multicast_toggle_one_vlan() clears BR_VLFLAG_MCAST_ENABLED under
br->multicast_lock before stopping a VLAN's multicast context. That is
the teardown handshake: lockless readers gate on the flag through
br_multicast_ctx_should_use() -> br_multicast_ctx_vlan_disabled(), so
once it is cleared under the lock no reader can arm the context again.
For a master VLAN the handshake never runs. __vlan_del() clears
BRIDGE_VLAN_INFO_BRENTRY before calling br_vlan_put_master(), so
br_multicast_toggle_one_vlan(masterv, false) returns early on
!br_vlan_is_brentry(vlan): the flag stays set and br->multicast_lock is
never taken. br_vlan_put_master() then drains the context in
br_multicast_ctx_deinit() and frees the VLAN through call_rcu(), while a
reader still inside rcu_read_lock() sees the context as enabled and
re-arms it. The port and port-VLAN branch of the function has no
br_vlan_is_brentry() test and flips the flag under br->multicast_lock,
so it is not affected.
The reader is the bridge transmit path. For a master VLAN
br_multicast_rcv() selects brmctx = &vlan->br_mcast_ctx with
pmctx = NULL, so IGMP sent to the bridge device re-arms the context's
timers after br_multicast_ctx_deinit() has already stopped them.
BUG: KASAN: slab-use-after-free in detach_if_pending+0x412/0x4a0
Write of size 8 at addr ffff88810ac39918 by task brmc/601
__mod_timer+0x51a/0xc50
br_multicast_host_join+0x25b/0x390
__br_multicast_add_group+0x468/0x530
br_ip4_multicast_add_group+0x1a0/0x260
br_multicast_rcv+0x2cda/0x61e0
br_dev_xmit+0x6c4/0x1540
Allocated by task 610:
br_vlan_add+0x111/0xb40
br_vlan_info+0x370/0x3e0
Freed by task 0:
kfree+0x1a7/0x4f0
rcu_core+0x7dc/0x10a0
Only test br_vlan_is_brentry() when enabling, like the
br_multicast_ctx_vlan_global_disabled() test next to it. Disabling then
always clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before
br_multicast_ctx_deinit() drains the context. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: fix UAF during close
ZDI reported and analyzed a race condition during close for espintcp
sockets:
espintcp_close() frees emsg->skb via kfree_skb() without holding
any socket lock. Concurrently, the xfrm_trans_reinject work queue
invokes esp_output_tcp_finish() -> espintcp_push_skb() ->
espintcp_push_msgs() -> skb_send_sock_locked(), which reads the
same skb as a data source.
Fix this by adding a synchronize_rcu() call after resetting sk_prot,
since esp_output_tcp_finish() runs under RCU and won't use a socket
with sk_prot == &tcp_prot. Simply taking the socket lock in
espintcp_close() could lead to leaks, if esp_output_tcp_finish()
re-adds an skb in the slot we just freed. After this, the existing
barrier() is no longer needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-ao: fix use-after-free of current_key on reconnect to another peer
tcp_inbound_ao_hash() is called before bh_lock_sock_nested() is taken,
with only rcu_read_lock() held. On the fast path for established
sockets, if the rnext_keyid sent by the peer differs from
current_key->sndid, the key the peer asked for is looked up and stored
in current_key. The lookup is inside the RCU read side, but current_key
outlives it.
When the socket is disconnected and connect() is called again for
another peer, tcp_ao_connect_init() unlinks every key that does not
match the new peer and frees it with call_rcu(). If current_key points
at such a key, it is cleared to NULL.
The fast path reads sk_state only once on entry, so a softirq that got
into it while the socket was still established can update current_key
after that loop has already run. The update is inside the RCU read side,
so it comes before the call_rcu() callback, and once the callback frees
the key, current_key is left pointing at freed memory.
The next transmission picks that pointer up in tcp_get_current_key().
tcp_ao_transmit_skb() then reads the traffic key from the freed object,
which is the use-after-free.
Wait for one grace period before unlinking, and only if a key is going
to be removed. By the time tcp_connect() runs the socket is already in
TCP_SYN_SENT, and TCP_AO_ESTABLISHED does not contain TCPF_SYN_SENT, so
a softirq entering after the wait cannot reach the fast path, and the
ones already in it have finished. The existing NULL handling in the loop
is then enough. |
| A flaw was found in libsoup. A malicious HTTP/2 server or a Man-in-the-Middle (MITM) attacker can exploit a heap use-after-free vulnerability in the HTTP/2 client implementation. This occurs when a GNOME application uploads a file using HTTP/2, and the server sends a GOAWAY frame while the file body is being read asynchronously. This can lead to memory corruption, potentially resulting in information disclosure or arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp
rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the
IB_QP_STATE path, so it holds no state_lock and runs while the responder
task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting
only that attribute calls free_rd_atomic_resources() then
alloc_rd_atomic_resources(), swapping qp->resp.resources[] while
rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources()
also leaves the cached pointer qp->resp.res dangling. A local
unprivileged user can race the free/realloc into a use-after-free in
rxe_receiver() (local DoS).
Drain recv_task around the swap with rxe_disable_task()/rxe_enable_task(),
as rxe_qp_reset() already does when tearing this array down, re-enabling
only after alloc_rd_atomic_resources() succeeds so the responder never
resumes against a NULL qp->resp.resources on the ENOMEM path. Also clear
qp->resp.res in free_rd_atomic_resources(), like the rxe_resp.c
completion paths.
Reproduced under KASAN; the slab-use-after-free in rxe_receiver() is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
When TD creation fails for the last packet of an isochronous URB,
c67x00_add_iso_urb() gives the URB back before updating the endpoint
scheduling state.
c67x00_giveback_urb() frees the URB private data, and the completion
callback may release the final URB reference. The following accesses to
urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed
memory.
Update next_frame and cnt before giving back the failed final packet,
making the giveback the last operation that uses the URB and its private
data. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: Add lock to usb_wakeup_notification()
Add a spin lock to usb_wakeup notification to prevent a race condition
with dereferencing freed memory. This could be hit by the xHCI driver as
it calls this function from an IRQ and could race with the
hub_disconnect() function, which properly grabs this lock to protect the
state of the device. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: keep the last remote linked during FDB flush
A non-nexthop FDB entry is expected to have at least one remote while it
remains reachable through the FDB hash table. A filtered bulk flush
violates this invariant when every remote matches: It unlinks the last
remote in vxlan_fdb_dst_destroy() and only afterwards tells vxlan_flush()
to destroy the parent FDB entry.
An RCU reader can find the parent during this interval.
first_remote_rcu() then applies list_entry_rcu() to the empty list head,
producing an invalid remote pointer that the receive learning path can
read from and write to.
When a matching remote is the sole remaining remote, leave it linked and
ask the caller to destroy the entire FDB entry. vxlan_fdb_destroy() keeps
the remote attached while sending the deletion notification and removing
the parent from the lookup structures. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix AO info use-after-free in tcp_ao_connect_init()
tcp_v4_connect() adds a SYN-SENT socket to the ehash before calling
tcp_connect(). If TCP-AO is configured, tcp_connect() first verifies that
a key matches the peer and the bound device's current L3 master.
tcp_ao_connect_init() later resolves the L3 master again and removes keys
which do not match it.
The socket lock does not stabilize the bound device's VRF membership.
Detaching the device from its VRF between the initial validation and the
L3-master calculation in tcp_ao_connect_init() can therefore make the
validation succeed while initialization observes the default L3 domain and
removes the only key. The subsequent AO lookup then fails, so the no-key
path clears tp->ao_info and frees it directly.
The receive path can find the socket in the ehash and load tp->ao_info
under RCU before acquiring the socket lock. A reader which loaded the old
pointer can thus continue into tcp_inbound_ao_hash() after the direct free.
The issue was found during a static audit of TCP-AO object lifetime. An
unprivileged reproducer in self-created user and network namespaces raced
connect() with detaching a veth from its VRF while sending TCP-AO segments.
It triggered the same KASAN report on two fresh boots:
BUG: KASAN: slab-use-after-free in tcp_inbound_ao_hash+0x585/0x19f0
Write of size 8 at addr ffff88800bf88128 by task tcp_ao_vrf_race/232
Call Trace:
tcp_inbound_ao_hash+0x585/0x19f0
tcp_inbound_hash+0x677/0xa80
tcp_v4_rcv+0x1c3e/0x3ab0
Allocated by task 235:
tcp_ao_alloc_info+0x43/0xf0
tcp_ao_add_cmd+0xdf7/0x13b0
do_tcp_setsockopt+0x168c/0x2640
Freed by task 235:
kfree+0x1b8/0x550
tcp_connect+0x252/0x4f00
tcp_v4_connect+0x1114/0x1720
The bad address is 40 bytes inside the freed 128-byte object, matching the
tcp_ao_info counters.key_not_found field. The two runs used 1000 attempts
each, reached the no-key path 366 and 411 times, and produced one and two
KASAN reports respectively. With this change, the same reproducer reached
the no-key path 366 times in 1000 attempts without a KASAN report or oops.
Use tcp_ao_destroy_sock() for the no-key path. It unpublishes the AO info,
updates the socket memory and static-key accounting, and defers the free
until after an RCU grace period.
Also drop the WARN_ON_ONCE() and its stale comment. The VRF detach race
makes the no-key state reachable during normal operation, so it is a
handled condition rather than an impossible assertion. On panic_on_warn
kernels the WARN would turn this handled race into a kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: keep port count until LUN teardown completes
tcm_usbg_drop_nexus() permits session removal once tpg_port_count
reaches zero. However, usbg_port_unlink() currently decrements that
count from the fabric_pre_unlink() callback, before core_dev_del_lun()
waits for active se_lun references to drain.
If removal of the last LUN races a nexus removal, the latter can observe
a zero port count and call target_remove_session(). This frees
sess_cmd_map while an in-flight struct usbg_cmd, including its work item,
can still be accessed.
Overlapping the last-LUN unlink with nexus removal reproduces this
lifetime violation as a DEBUG_OBJECTS "free active" warning for
usbg_cmd_work, followed by a target-core BUG/Oops.
The generic target-core unlink path has no callback after
core_dev_del_lun() completes. Add an optional fabric_post_unlink()
callback and use it for the f_tcm port count. The count now remains
nonzero until core_dev_del_lun() has finished draining active LUN
references, preventing nexus removal from freeing the session during
command completion. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown
arm_smmu_impl_remove() is registered as a devres action in
arm_smmu_impl_probe(), before arm_smmu_init_queues() allocates
smmu->cmdq.q.base. On a devres unwind, whether a failed probe or an
unbind, the queue is freed first and arm_smmu_impl_remove() then runs
tegra241_cmdqv_remove_vintf(), whose VINTF deinit issues a CMD_SYNC on
the freed memory.
Observed during testing with a QEMU hack that makes the VCMDQ fail to
enable, so the impl reset fails and probe aborts into the devres unwind:
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: failed to enable, STATUS=0x00000000
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: GERRORN=0x0, GERROR=0x4, CONS=0x0
platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: uncleared error detected, resetting
arm-smmu-v3 arm-smmu-v3.0.auto: failed to reset impl
arm-smmu-v3 arm-smmu-v3.0.auto: probe with driver arm-smmu-v3 failed with error -110
Unable to handle kernel paging request at virtual address ffff8000891e0098
...
Internal error: Oops: 0000000096000047 [#1] SMP
...
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x320/0x6fc (P)
tegra241_vcmdq_hw_deinit+0x98/0x168
tegra241_vintf_hw_deinit+0x5c/0x1b0
tegra241_cmdqv_remove_vintf+0x34/0xec
tegra241_cmdqv_remove+0x40/0x9c
arm_smmu_impl_remove+0x20/0x30
devm_action_release+0x14/0x20
devres_release_all+0xa8/0x110
device_unbind_cleanup+0x18/0x84
really_probe+0x1f0/0x29c
Drop the VINTF deinit from tegra241_cmdqv_remove_vintf() so the unwind no
longer touches the freed queue. Quiesce the VINTFs earlier instead. Add a
device_disable() impl op and run it from arm_smmu_disable_action() while
the CMDQ is still up. That handles a live unbind. A failed reset is already
handled because tegra241_vintf_hw_init() deinits the VINTF on its own error
path. tegra241_cmdqv_remove_vintf() is also used by the iommufd viommu
destroy path, so quiesce there too. |
| A maliciously crafted PDF file, when parsed through Autodesk Revit, can force a Use-After-Free vulnerability. A malicious actor can leverage this vulnerability to cause a crash, disclose sensitive data, or execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
futex/pi: Reject cross-mm private futex owners
A private futex key borrows the waiter's mm without taking an mm_users
reference. Nevertheless, attach_to_pi_owner() currently accepts an owner
from a different address space and copies the private key into the owner's
PI state.
When that owner exits, exit_pi_state_list() uses the saved key to find the
hash bucket and acquires a reference to the waiter's private hash. If the
last user of the waiter's mm exits concurrently, futex_hash_free() frees
the hash while the owner still uses its bucket and reference.
Prevent this by validating in attach_to_pi_owner() that, for private
futexes, the owner mm and waiter mm are the same. Perform the check with
the owner's pi_lock held and after validating owner::futex::state to
serialize against a concurrent PI-state exit cleanup.
[ tglx: Amended comment ] |
