| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A deployment mode intended to expose only read access to a bundled packet-analysis component's interface denies a list of write-capable routes by pattern, but the pattern omits routes that modify tags attached to stored session records, and the proxy configuration otherwise permits the request method those routes use. This allows an authenticated user on a deployment intended to be read-only to add or remove tags on stored session records. |
| An example environment-configuration file for a bundled inventory-management component ships with a fixed, publicly-known administrative password. A deployment that copies this example file into active configuration without running the setup routine that regenerates credentials will expose that component's administrative interface to anyone aware of the default value. |
| The administrative password is hashed using a comparatively weak, fast algorithm for the credential store backing one authentication path, and the file containing that hash is written with permissions allowing it to be read by any local user. This is inconsistent with a separate, stronger hashing algorithm used for the same password on another authentication path. A party able to read this file, including a local user or a party with access to a configuration backup, could feasibly recover the underlying password through offline computation, compromising the administrative credential across every path that accepts it. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: size fh_verify server sockaddr slot by xpt_locallen
The nfsd_fh_verify and nfsd_fh_verify_err tracepoints declare the
server sockaddr slot sized by xpt_remotelen but fill it from
xpt_local using xpt_locallen:
TP_STRUCT__entry(
...
__sockaddr(server, rqstp->rq_xprt->xpt_remotelen)
...
)
TP_fast_assign(
...
__assign_sockaddr(server, &rqstp->rq_xprt->xpt_local,
rqstp->rq_xprt->xpt_locallen);
...
)
When xpt_locallen exceeds xpt_remotelen, __assign_sockaddr's memcpy
writes past the reserved ring-buffer slot. In the reverse direction
(xpt_locallen < xpt_remotelen) the slot is oversized and the
unwritten tail leaks prior ring-buffer contents to trace consumers.
The write-past-end case is reachable on NFS/UDP. svc_xprt_set_remote()
is only called from svc_tcp_accept() (net/sunrpc/svcsock.c) and from
the RDMA connect path; svc_create_socket() for UDP calls only
svc_xprt_set_local(), so xpt_remotelen stays 0 for the xprt's
lifetime. Every fh_verify trace for an NFSv2/v3-over-UDP request
then copies 16 or 28 bytes from xpt_local into a zero-byte slot.
The other NFSD tracepoints that record the server address
(NFSD_TRACE_PROC_CALL_FIELDS, NFSD_TRACE_PROC_RES_FIELDS,
SVC_RQST_ENDPOINT_FIELDS) already size the server slot by
xpt_locallen; nfsd_fh_verify and nfsd_fh_verify_err were the only
exceptions.
Fix by sizing the server slot with xpt_locallen so the declared slot
matches the copy length. The client slot and its assignment already
agree on xpt_remotelen and are left untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: check truncate permission under inode lock
nfsd_setattr() checks whether a size update needs NFSD_MAY_TRUNC
before it takes inode_lock(). The comparison uses the file size sampled
by that unlocked read, but the actual ATTR_SIZE update is applied later
under inode_lock() by notify_change().
This leaves a TOCTOU window for append-only files. If a client sends a
SETATTR that does not shrink the file at the time of the unlocked
sample, a concurrent append can extend the file before nfsd_setattr()
takes inode_lock(). notify_change() then applies a real truncation
without the NFSD_MAY_TRUNC check that rejects IS_APPEND(inode). The VFS
truncate syscall paths perform their own append-only checks before
calling notify_change(), so NFSD must make this decision against the
locked size it is about to change.
Split the write-count acquisition from the truncation permission check.
Keep get_write_access() before the locked setattr work, then recheck
whether the requested size is below i_size_read(inode) after inode_lock()
has been acquired and before notify_change(ATTR_SIZE). This also avoids
the plain unlocked inode->i_size load. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a.
The intentions of that patch were good, but it doesn't work.
The idea is that if device_register fails, you have to do a put_device
to let the ref counter release resources.
However, the V4L2 API says that if video_register_device() fails, then
you have to call video_device_release(), which kfree()s the video_device
struct.
But the put_device() will already have freed the struct, so you end
up in a double-free scenario.
There is not really a good way of fixing this without breaking
video_register_device() into two parts, one that initializes everything,
and one that does the actual device_register, and then converting all
V4L2 drivers to this new model.
That is a massive job, and it is very unlikely that device_register
will fail.
So rather than ending up in a double-free scenario, just revert this
patch, and in that case we'll have a small memory leak. Which is a lot
more robust. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix cred UAF caused by begin_current_label_crit_section()
AppArmor's begin_current_label_crit_section() is a scary function called
from lots of LSM hooks (in particular VFS/socket-related ones) that checks
if the label referenced by the current creds is marked FLAG_STALE, and if
so, attempts to use aa_replace_current_label() to replace the creds with an
updated version that uses a new label.
The first problem with this is that it would directly lead to UAF of
`struct cred` if anything in the kernel takes a pointer to the current
creds and accesses these past a security hook invocation that replaces
creds, like so:
```
const struct cred *cred = current_cred();
alloc_file_pseudo(...);
uid_t uid = cred->euid;
```
I don't know if anything in the kernel actually does this, but I think it
is very surprising that this pattern could lead to UAF.
The second problem is that things go wrong when aa_replace_current_label()
runs with overridden credentials. aa_replace_current_label() bails out if
`current_cred() != current_real_cred()` (mirroring the check in
proc_pid_attr_write()), but this check can't actually reliably detect
overridden credentials because the overridden creds can be the same as the
objective creds.
So in approximately the following scenario, things go wrong:
1. task begins with <creds A> (as both objective and subjective creds),
with refcount=2
2. task grabs an extra reference on <creds A> for overriding
3. task calls override_creds(<creds A>), which returns a pointer to the old
subjective creds (<creds A>)
4. task enters AppArmor LSM hook
5. AppArmor checks that objective/subjective creds are equal
6. AppArmor replaces both cred pointers with <creds B> and drops 2 refs on
<creds A>
7. task leaves AppArmor LSM hook
8. task calls revert_creds(<creds A>)
9. now task->cred is <creds A> while task->real_cred is <creds B>, but the
task_struct logically holds two references to <creds B>
10. another task drops the extra reference on <creds A> that was used for
overriding, refcount drops to 0
11. now task->real_cred points to freed creds
At this point, any access to current_cred() will be UAF.
I have a test case where I run aa-disable on a profile while a process
using that profile is blocked on splice() from a FUSE passthrough file into
a full pipe; after the profile update, the pipe becomes empty, splice()
resumes, the credentials go out of sync, and a subsequent getuid() syscall
results in a KASAN UAF splat.
To fix this, instead of directly replacing creds, do it via task_work that
will run at the end of the current syscall. (The point in time at which the
cred replacement happens should have no correctness impact; it is just a
performance optimization to avoid unnecessarily touching the refcount of
the new label.)
Note that AppArmor still performs direct cred replacements in the
sb_pivotroot LSM hook after this change, and that direct cred replacements
can still happen in VFS ->write() callbacks via proc_pid_attr_write().
There are two options for what to do with aa_dup_task_ctx(): Either
explicitly reset new->label_replacement_pending after the entire
aa_task_ctx has been copied, or switch to manually copying members over.
I am switching to manually copying members over because that should make
bugs more obvious. |
| An interface that accepts file uploads from authenticated users extracts the contents of uploaded archives without validating that extracted file paths remain within the intended destination directory. This allows an authenticated attacker to craft an archive whose entries traverse outside the destination directory, causing the extraction process to write files to arbitrary locations with the privileges of that process. This could allow an attacker to inject fabricated records into the system's stored data or tamper with application configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix CT limit teardown use-after-free
Packet processing uses CT limit state under RCU, while netns teardown
frees that state under ovs_mutex. The CT limit pointer was neither removed
from readers nor protected by a grace period, allowing packet processing to
dereference the freed state.
An unprivileged user can trigger this bug from a user and network
namespace, causing a slab-use-after-free in ovs_ct_execute() when the
netns is torn down.
Publish the CT limit pointer through RCU, remove it before teardown, and
wait for readers before freeing its contents. Keep ovs_mutex around
individual CT limit updates, and use the RCU read-side lock while GET
traverses the RCU-protected limit lists.
Netns teardown detaches the RCU-protected CT limit state in the pernet
.pre_exit callback while holding ovs_mutex. The pernet core guarantees an
RCU grace period between the .pre_exit and .exit callbacks, so the .exit
callback completes the teardown without adding any extra synchronization.
The netlink command handlers do not need NULL checks because the userspace
netlink socket holds an active reference to its network namespace while a
request is processed. The per-netns exit path therefore cannot run
concurrently with SET, DEL, or GET for that socket's namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: free buffered reports when destroying device
roccat_report_event() duplicates each report with kmemdup() and stores
the allocation in a circular-buffer slot. The allocation is released only
when that slot is reused.
The device destruction paths free struct roccat_device without releasing
reports still stored in cbuf[]. This makes those allocations unreachable
and leaks up to ROCCAT_CBUF_SIZE report buffers per device.
Add a small destructor that frees every buffered report before freeing the
device, and use it in both paths that can destroy a registered device. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: use cifs_invalidate_cache() in cifs_do_truncate() for O_TRUNC
cifs_do_truncate() is invoked from cifs_open() without i_rwsem, so it
cannot use cifs_resize_file_locked() to perform a proper fscache cookie
resize. Instead, add cifs_invalidate_cache() after cifs_setsize().
cifs_invalidate_cache() calls fscache_invalidate(), which works without
holding i_rwsem: it unconditionally increments inval_counter and sets
FSCACHE_COOKIE_NO_DATA_TO_READ, ensuring that stale cached data is not
served once the cookie is later activated by fscache_use_cookie().
Truncation to zero leaves no valid cached data, making invalidation the
correct semantic here. |
| A deployment mode intended to expose only read access to stored data proxies a set of application programming interface routes without restricting which request methods are allowed. One such route accepts a request that creates or overwrites a stored record, including an attacker-chosen identifier, using the application's own elevated backend credentials. This allows an authenticated user on a deployment intended to be read-only to forge or overwrite stored records that should not be modifiable in that deployment mode. |
| A prior update that raised a bundled HTTP client library to a version remediating known vulnerabilities was later reverted, reintroducing the earlier, vulnerable version into a log-processing component. The only code path in that component using the library issues a request to a single fixed, trusted vendor URL at initialization and does not process attacker-controlled input through the library, limiting practical exploitability of the reintroduced version in this context. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reject out-of-range useconds in NFSv2 SETATTR/CREATE
The NFSv2 sattr decoder converts the wire useconds to nanoseconds in
svcxdr_decode_sattr():
iap->ia_atime.tv_nsec = tmp2 * NSEC_PER_USEC;
tmp2 is a u32 and NSEC_PER_USEC is 1000, so the product is computed in
unsigned long. On ILP32 that is 32 bits, and an out-of-range useconds
value such as 4294968 wraps to tv_nsec == 704. The corruption therefore
happens during decode, before any proc function can inspect the value,
and a later range check on tv_nsec would see an in-range result and
accept it. Rejecting in the decoder yields an RPC GARBAGE_ARGS reply.
NFSv2 defines no NFSERR_INVAL, so there is no NFS-level status to return
for a malformed time argument, and the check cannot move to the proc
function the way the v3/v4 nsec range checks do.
Guard the raw useconds before the multiplication and reject values
greater than 1000000. useconds == 1000000 is kept: it is the Sun
convention for "set to the current server time", and the in-tree Linux
NFSv2 client emits it in both the atime and the mtime field for a plain
touch / utimes(file, NULL) (see encode_sattr() and
xdr_encode_current_server_time() in fs/nfs/nfs2xdr.c). Rejecting 1000000
would turn that common operation into a hard decode failure for both
SETATTR and CREATE. 1000000 * NSEC_PER_USEC is 10^9, which does not wrap
on ILP32, so the Sun convention value passes through safely. Only
genuinely out-of-range values (> 1000000) are rejected. The atime and
mtime guards are therefore symmetric.
The decoder only applied the Sun convention in the mtime block, which
clears ATTR_ATIME_SET|ATTR_MTIME_SET when mtime useconds == 1000000. If a
client puts 1000000 in the atime field but not in the mtime field, the
atime block stored an out-of-range tv_nsec (10^9) and left ATTR_ATIME_SET
set, so the bogus value reached the filesystem. Apply the convention in
the atime block as well, clearing ATTR_ATIME_SET so the server uses its
current time and ignores the value. Only ATTR_ATIME_SET is cleared there.
The mtime block keeps its existing behavior, where 1000000 means "set
both atime and mtime to now".
[ cel: various tweaks, addenda, and clean-ups ] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: don't free session slots that are still in use
nfsd4_sequence() can free the very slot it is currently processing.
When the session shrinker has reduced se_target_maxslots below
se_fchannel.maxreqs, the shrink path checks three conditions before
calling free_session_slots():
1. se_target_maxslots < maxreqs (shrink was advertised)
2. slot->sl_generation == se_slot_gen (slot is up-to-date)
3. seq->maxslots <= se_target_maxslots (client acknowledges)
However, seq->slotid is never checked against se_target_maxslots.
A client using a slot in the range [se_target_maxslots, maxreqs) can
satisfy all three conditions: its slot has the current generation
(set by a prior SEQUENCE), and it sends sa_highest_slotid <=
se_target_maxslots to acknowledge the reduction.
free_session_slots() then kfrees every slot at index >=
se_target_maxslots, including the caller's own slot. The function
continues to write sl_seqid, sl_flags, sl_generation, and stores the
dangling pointer in cstate->slot. Later, nfsd4_store_cache_entry()
copies up to maxresp_cached bytes of the compound reply into the freed
sl_data[] array, corrupting whatever slab object now occupies that
address.
Additionally, a concurrent thread processing SEQUENCE on a different
high-numbered slot can have its slot freed out from under it.
NFSD4_SLOT_INUSE is set under nn->client_lock before the lock is
released, so any concurrent thread past SEQUENCE will have its slot
marked. However, free_session_slots() does not check NFSD4_SLOT_INUSE
before freeing.
Fix both problems by:
1. Checking that the current request's slotid is below the shrink
boundary.
2. Scanning slots in the to-be-freed range for NFSD4_SLOT_INUSE and
deferring the shrink if any are active. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown
After a DESTROY_SESSION the per-session teardown path can free a
session while rpciod still holds an inflight callback rpc_task that
dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes
cl_callback_wq, but once nfsd4_run_cb_work() has called
rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue
does not wait for it. rpc_shutdown_client() does drain rpciod tasks,
but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay()
(e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain.
destroy path rpciod
------------ ------
unhash_session(ses)
nfsd4_probe_callback_sync(clp)
flush_workqueue(cl_callback_wq)
/* returns; rpc_task still live */
nfsd4_put_session_locked(ses)
free_session(ses) -> kfree(ses)
nfsd4_cb_sequence_done()
reads cb_clp->cl_cb_session
/* freed slab */
A second window exists in nfsd4_process_cb_update(). When
__nfsd4_find_backchannel() returns NULL because unhash_session() has
already removed the destroyed session from cl_sessions,
setup_callback_client() takes the v4.1 early return so
clp->cl_cb_session = ses never fires and the field retains a pointer
to the about-to-be-freed session.
Fix both by converting cl_cb_session to an RCU-protected pointer:
- Move the cl_cb_session = ses assignment in setup_callback_client()
to after rpc_create() succeeds, so it is only published when a
working backchannel exists. Clear cl_cb_session on the error
return in nfsd4_process_cb_update(). Both stores use
rcu_assign_pointer().
- Annotate cl_cb_session with __rcu. All rpciod-side readers use
rcu_read_lock()/rcu_dereference() and check for NULL, bailing to
the appropriate error or requeue path:
encode_cb_sequence4args(), decode_cb_sequence4resok(),
nfsd41_cb_get_slot(), nfsd41_cb_release_slot(),
nfsd4_cb_prepare(), and nfsd4_cb_sequence_done().
- Switch __free_session() from kfree() to kfree_rcu() so the
session slab is not reclaimed until after an RCU grace period,
guaranteeing that rpciod readers inside rcu_read_lock() never
dereference freed memory.
- Pass the session pointer to the nfsd_cb_seq_status and
nfsd_cb_free_slot tracepoints instead of having them re-read
cl_cb_session.
- nfsd4_cb_prepare() calls rpc_exit() when the session is NULL,
routing through the done/release path to requeue the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: fix ref leak on nfs_uuid_add_file failure
When nfs_uuid_add_file() races with nfs_uuid_put() tearing down
uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via
rcu_assign_pointer(). nfs_open_local_fh() then enters its error
branch and only releases the slot's file ref and its paired net
ref plus its own entry-time net ref, while the close path is a
no-op:
nfs_close_local_fh()
nfs_uuid = rcu_dereference(nfl->nfs_uuid);
if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */
nfsd_open_local_fh() returns localio holding a caller-owned +1
nfsd_file reference (from nfsd_file_get() after
nfsd_file_acquire_local()) and an entry-time nfsd_net reference
(from its first nfsd_net_try_get()) embedded as nf->nf_net. Both
are leaked on the failure path, pinning one nfsd_file (and the
underlying struct file, dentry, inode) and one nfsd_net_ref per
occurrence, which blocks nfsd_net and netns teardown.
Fix by releasing the caller-owned file ref and its net ref through
the existing helper, using a stack-local RCU pointer so the helper
can xchg it out, then returning -ENXIO so callers do not
dereference a localio whose slot has been cleared:
struct nfsd_file __rcu *tmp = RCU_INITIALIZER(localio);
nfs_to_nfsd_file_put_local(pnf);
nfs_to_nfsd_file_put_local(&tmp);
localio = ERR_PTR(-ENXIO);
The trailing nfs_to_nfsd_net_put(net) continues to release the
outer net ref, so all three nfsd_net_try_get() increments are
balanced on the error branch. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix uninitialized local_id in syncookie MP_JOIN reconstruction
mptcp_token_join_cookie_init_state() restores remote_nonce, local_nonce,
backup, join_id, token and msk from the saved cookie entry when rebuilding
the request socket for a MP_JOIN 4th-ACK handled under SYN cookies, but it
does not restore local_id, even though the SYN path saved it.
subflow_ulp_clone() then reads that uninitialized field and stores it as
the joined subflow's address-ID. Because the request-sock slab is
SLAB_TYPESAFE_BY_RCU and not zeroed on allocation, the value is the stale
byte of a previously freed request socket, which an off-path peer can
influence by sending concurrent MP_JOIN SYNs. This corrupts the path
manager's id-based subflow bookkeeping for the connection.
Restore subflow_req->local_id from the cookie entry, as done for the other
fields. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: GHES: fix ARM section length accounting after header
In ghes_handle_arm_hw_error(), after skipping the cper_sec_proc_arm
header with (err + 1), the remaining length was reduced by sizeof(err)
(pointer size) instead of sizeof(*err) (structure size).
That overestimates the bytes left for cper_arm_err_info records and can
let the parser read past the CPER section when err_info_num is large
enough relative to error_data_length.
Use sizeof(*err) so the length accounting matches the pointer advance
and the earlier sizeof(*err) size check. |
