| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps.
This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication:
- Re-configure Access Managers (e.g. remove alarming system requirements)
- Freely re-configure the inputs and outputs
- Open all connected doors permanently
- Open all doors for a defined time interval
- Change the admin password
- and many more
Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. |
| PAM-PKCS#11 is a Linux-PAM login module that allows a X.509 certificate based user login. Prior to version 0.6.13, if cert_policy is set to none (the default value), then pam_pkcs11 will only check if the user is capable of logging into the token. An attacker may create a different token with the user's public data (e.g. the user's certificate) and a PIN known to the attacker. If no signature with the private key is required, then the attacker may now login as user with that created token. The default to *not* check the private key's signature has been changed with commit commi6638576892b59a99389043c90a1e7dd4d783b921, so that all versions starting with pam_pkcs11-0.6.0 should be affected. As a workaround, in `pam_pkcs11.conf`, set at least `cert_policy = signature;`. |
| The Access Manager 92xx in hardware revision K7 is based on Linux instead of Windows CE embedded in older hardware revisions. In this new hardware revision it was noticed that an SSH service is exposed on port 22. By analyzing the firmware of the devices, it was noticed that there are two users with hardcoded and weak passwords that can be used to access the devices via SSH. The passwords can be also guessed very easily. The password of at least one user is set to a random value after the first deployment, with the restriction that the password is only randomized if the configured date is prior to 2022. Therefore, under certain circumstances, the passwords are not randomized. For example, if the clock is never set on the device, the battery of the clock module has been changed, the Access Manager has been factory reset and has not received a time yet. |
| By default, the password for the Access Manager's web interface, is set to 'admin'. In the tested version changing the password was not enforced. |
| Improper Input Validation vulnerability in pbkdf2 allows Signature Spoofing by Improper Validation.This issue affects pbkdf2: <=3.1.2. |
| Multiple wireless router models from Sapido have an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. The affected models are out of support; replacing the device is recommended. |
| Dover Fueling Solutions ProGauge MagLink LX Consoles expose an undocumented and unauthenticated target communication framework (TCF) interface on a specific port. Files can be created, deleted, or modified, potentially leading to remote code execution. |
| Versions of the package jsonpath-plus before 10.3.0 are vulnerable to Remote Code Execution (RCE) due to improper input sanitization. An attacker can execute aribitrary code on the system by exploiting the unsafe default usage of eval='safe' mode.
**Note:**
This is caused by an incomplete fix for [CVE-2024-21534](https://security.snyk.io/vuln/SNYK-JS-JSONPATHPLUS-7945884). |
| A vulnerability, that could result in Remote Code Execution (RCE), has been found in DocsGPT. Due to improper parsing of JSON data using eval() an unauthorized attacker could send arbitrary Python code to be executed via /api/remote endpoint..
This issue affects DocsGPT: from 0.8.1 through 0.12.0. |
| Kaleris NAVIS N4 ULC (Ultra Light Client) contains an unsafe Java deserialization vulnerability. An unauthenticated attacker can make specially crafted requests to execute arbitrary code on the server. |
| A remote code execution vulnerability exists within osCommerce Online Merchant version 2.3.4.1 due to insecure default configuration and missing authentication in the installer workflow. By default, the /install/ directory remains accessible after installation. An unauthenticated attacker can invoke install_4.php, submit crafted POST data, and inject arbitrary PHP code into the configure.php file. When the application later includes this file, the injected payload is executed, resulting in full server-side compromise. |
| The Marathon UI in DC/OS < 1.9.0 allows unauthenticated users to deploy arbitrary Docker containers. Due to improper restriction of volume mount configurations, attackers can deploy a container that mounts the host's root filesystem (/) with read/write privileges. When using a malicious Docker image, the attacker can write to /etc/cron.d/ on the host, achieving arbitrary code execution with root privileges. This impacts any system where the Docker daemon honors Marathon container configurations without policy enforcement. |
| A remote code execution vulnerability exists in Kaltura versions prior to 11.1.0-2 due to unsafe deserialization of user-controlled data within the keditorservices module. An unauthenticated remote attacker can exploit this issue by sending a specially crafted serialized PHP object in the kdata GET parameter to the redirectWidgetCmd endpoint. Successful exploitation leads to execution of arbitrary PHP code in the context of the web server process. |
| Uploadify WordPress plugin versions up to and including 1.0 contain an arbitrary file upload vulnerability in process_upload.php due to missing file type validation. An unauthenticated remote attacker can upload arbitrary files to the affected WordPress site, which may allow remote code execution by uploading executable content to a web-accessible location. |
| Akka.NET is a .NET port of the Akka project from the Scala / Java community. In all versions of Akka.Remote from v1.2.0 to v1.5.51, TLS could be enabled via our `akka.remote.dot-netty.tcp` transport and this would correctly enforce private key validation on the server-side of inbound connections. Akka.Remote, however, never asked the outbound-connecting client to present ITS certificate - therefore it's possible for untrusted parties to connect to a private key'd Akka.NET cluster and begin communicating with it without any certificate. The issue here is that for certificate-based authentication to work properly, ensuring that all members of the Akka.Remote network are secured with the same private key, Akka.Remote needed to implement mutual TLS. This was not the case before Akka.NET v1.5.52. Those who run Akka.NET inside a private network that they fully control or who were never using TLS in the first place are now affected by the bug. However, those who use TLS to secure their networks must upgrade to Akka.NET V1.5.52 or later. One patch forces "fail fast" semantics if TLS is enabled but the private key is missing or invalid. Previous versions would only check that once connection attempts occurred. The second patch, a critical fix, enforces mutual TLS (mTLS) by default, so both parties must be keyed using the same certificate. As a workaround, avoid exposing the application publicly to avoid the vulnerability having a practical impact on one's application. However, upgrading to version 1.5.52 is still recommended by the maintainers. |
| The WIMP website co-construction management platform from HAMASTAR Technology has a SQL Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary SQL commands to read, modify, and delete database contents. |
| internetarchive is a Python and Command-Line Interface to Archive.org In versions 5.5.0 and below, there is a directory traversal (path traversal) vulnerability in the File.download() method of the internetarchive library. The file.download() method does not properly sanitize user-supplied filenames or validate the final download path. A maliciously crafted filename could contain path traversal sequences (e.g., ../../../../windows/system32/file.txt) or illegal characters that, when processed, would cause the file to be written outside of the intended target directory. An attacker could potentially overwrite critical system files or application configuration files, leading to a denial of service, privilege escalation, or remote code execution, depending on the context in which the library is used. The vulnerability is particularly critical for users on Windows systems, but all operating systems are affected. This issue is fixed in version 5.5.1. |
| Relative Path Traversal vulnerability in Ping Identity PingAM Java Policy Agent allows Parameter Injection.This issue affects PingAM Java Policy Agent: through 5.10.3, through 2023.11.1, through 2024.9. |
| The application contains an insecure 'redirectToUrl' mechanism that incorrectly processes the value of the 'redirectUrlParameter' parameter. The application interprets the entered string of characters as a Java expression, allowing an unauthenticated attacer to perform arbitrary code execution.
This issue was fixed in version wu#2016.1.5513#0#20251014_113353 |
| Incorrect Implementation of Authentication Algorithm vulnerability in ABB ABB Ability OPTIMAX.This issue affects ABB Ability OPTIMAX: 6.1, 6.2, from 6.3.0 before 6.3.1-251120, from 6.4.0 before 6.4.1-251120. |
